Load sct_lakeshore 340 and 336 configurations. Load new robot pick and place configuration
hmm_configuration.tcl
Override proc CAT_TABLE to add offset and magnification configuration.
motor_configuration.tcl
Modularised for tilt and euler configurations.
Added euler_configuration.tcl and put tilt stage configuration in tilt_configuration.tcl
r3030 | ffr | 2010-12-01 10:29:42 +1100 (Wed, 01 Dec 2010) | 10 lines
Reduce log noise by setting iout = eInternal for macros.
servlog.c
Fixed timestamp in logfiles to get hours.
hmm_configuration_common_1.tcl
Added ML's mods to wombat config: ie BAT and FAT TABLE attributes and elements for multi-period acquisition and histo-streaming.
Fixed "failed lsearch" bug. It's more robust to test for a non-successful lsearch instead of a failed lsearch.
nxscripts_common_1.tcl
SICS-297 Fixed Saving data series in a scratch file overwrites earlier entries.
instdict_specification.tcl
Added "scobj" kind and "sct_indexed_motor" sics object type for script context controllers and and objects.
hipadaba_configuration_common.tcl
Added sct_indexed_motor sics obj type to ::hdb::sobjadd and scobj kind to ::hdb::add_node
sct_positmotor_common.tcl
Update the index SICS variable when updating the current index value to make sure that the position is saved in the data file.
You must now provide the hdb node_name when creating the sct posit motor.
mk_sct_positmotor now sets the "param" and "long_name" attributes on the posit motor object
util/utility.tcl
Added ::utility::set_sct_indexed_motor_attributes to set SICS object attributes required for generating hdb info for an SCT_POSIT_MOTOR
nxscript.c
Merge the ansto mod to putslab (rev1.7) which adds support for saving unbuffered data from the histmem.
sicshipadaba.c
This incorporates the patch made to CommandSetCallback in rev1.10 so it can just be copied as is (ie no merge required).
WARNING: There are changes to ListHdbNode to handle record separators which may affect us.
Disabled sending hdb command start and stop messages because they break gumtree
sicshdbfactory.c
Disabled sending hdb command start and stop messages because they break gumtree
hipadaba_configuration_common.tcl R2.4DEV
The sct_posit_motor case of ::hdb::sobjadd is only needed to call add_node with kind=scobj.
nxscripts_common_1.tcl R2.4DEV
Added ::nexus::scobj::sdsinfo
_gen_nxdict now skips nodes with data_type == "none"
new util/script_context_util.tcl R2.4DEV
Adds ::scobj::hinitprops command to initialise the hdb properties for script context object nodes.
sct_positmotor_common.tcl R2.4DEV
Use ::scobj::hinitprops utility command to initialise hdb properties on script context object parameter nodes.
dynstring.c
DynStringReplace should memcopy '\0', otherwise it can get the wrong length for iTextLen.
Added DynStringReplaceWithLen to allow initialising a dynstring with char arrays which contain null chars and
other non-ascii chars. Useful for read and write buffers in script context.
ascon.c
AsconRead return NULL for noResponse and AsconFailed otherwise the "result" node gets set with a spurious empty value.
scriptcontext.c
SctActionHandler only set the "result" node if there really is a reply.
sicsobj.c
Update from M.K.
site_ansto.c
Added galil and ordela hvps protocol handlers for scriptcontext.
motor_dmc2280.c
Allow home parameter to be outside of limits (for KOWARI)
hardsup/makefile
Added ordela HVPS protocol handler
hardsup/sct_orhvpsprot.c
New ordela HVPS protocol handler. Retries on NAKs and re-orders pot channels (ie toggles lower two bits).
hardsup/sct_velselprot.c
Start velocity selector protocol handler.
hardsup/sct_galilprot.c
Completed galil protocol handler.
hipadaba_configuration_common.tcl
Add new style SICS objects to hdb tree.
instdict_specification.tcl
Added scobj to kind list and sct_motor to sics object list. (and some housekeeping)
hmm_configuration_common_1.tcl
Added ratemaps to simulation. Fixe BAT_TABLE and added PERIOD_INDICES as per Mark Lesha's mods for multi-period acquisition.
ratemaps now return float.
sct_postimotor_common.tcl
Now setting properties on the posit motor object so that it can be automatically added to the hdb tree.
hrpd/config/motors/motor_configuration.tcl
Fixed simulated msd motor so that it's handle properly in the hdb layer.
sans/config/hmm/detector_ordela.tcl
Updated the ordela calibration script to use the new sct_orhvpsprop.c script context controller.
quokka_configuration.tcl
Deleted lines which set the hdb properties for script context posit motors. This is now handled automatically as for other SICS objects.
utility.tcl
setpos now replaces the motor setpos subcommand.
Added functions to set script context object attributes and sct_posit motor attributes.
Created hparPath and hsibPath convenience commands for new-style SICS objects.
script_context_util.tcl
NEW! Adds hinitprops function to initialise the hdb properties for a script context object
r2758 | ffr | 2008-12-12 17:53:53 +1100 (Fri, 12 Dec 2008) | 113 lines
Added histmem and runscan command
hmm_configuration_common_1.tcl
Set histmem_cmd status feedback to IDLE on COUNTEND event
nxscripts_common_1.tcl
When saving a set of files the time-stamp is offset from the time the first file is created.
scan_common_1.tcl
The hmscan hook functions now set feedback on the runscan_cmd
sct_positmotor_common.tcl
Added mk_sct_positmotor command to create a script context controller which runs a motor to an indexed position.
Added positmotor_configuration.tcl to echidna, wombat, kowari, quokka, platypus.
sans/config/motors/positmotor_configuration.tcl
Has an example of a positmotor configuration for the sample changer
sanx/quokka_configuration.tcl
Setup feedback nodes for AttRotDeg and RotApDeg.
motor_utility.tcl
Added reldrive and relrun commands along with getmotpar convenience command.
r2725 | ffr | 2008-10-27 15:55:48 +1100 (Mon, 27 Oct 2008) | 26 lines
Create pas/config/source/source.tcl
config/source/source_common.tcl
pelican_configuration.tcl
deploySICS.sh
Don't deploy script validator configs, they are obsolete
server_config.tcl
Source config has been moved to config/source and is specialised for each instrument by calling the instrument specific initialiser ::source:isc_initalize
commands_common_1.tcl
The monitor mode and preset are recorded when running the count command
counter_common_1.tcl
Report and record the counts and time for the multicounter and each monitor. Also record the mode and preset for the multicounter.
hmm_configuration_common_1.tcl
Cleanup, remove obsolete code.
Report and record the hmm total counts and time.
Allow monitor controlled acquisition from the histogram server
nxscripts_common_1.tcl
Add DataType to NXdata section, preserve case in text attributes.
scan_common_1.tcl
Provide sensible feedback for our bmonscan and hmscan objects.
Set run_mode when doing a scan. Allow users to select the datatype for histmem scans and to force a scan
wombat_configuration.tcl
echidna_configuration.tcl
platypus_configuration.tcl
kowari_configuration.tcl
quokka_configuration.tcl
Load source config.
quokka_configuration.tcl
SICS-198 HACK, Add AttrotDeg and RotApDeg status feedback.
sans/commands/commands.tcl
Add status feedback for quokka "guide" command.
sans/parameters/parameters.tcl
Make sure data can be saved as xml (replace % with _percent)
SICS-198 HACK, add AttRotDeg and RotApDeg status feedback.
utility.tcl
Fix nasty "params array generator" bug. SICS commands execute at runlevel 0 which means that the params anonymous array must be made at this level.
Provide the normalattlist command to enable creating attribute lists with the case preserved.
Added the runsics, runtestsics and sicsclient scripts to CVS.
Added source configurations for echidna, wombat, kowari, quokka, platypus, and pelican to CVS
r2644 | ffr | 2008-07-11 11:09:57 +1000 (Fri, 11 Jul 2008) | 53 lines
