hdb_, Parameter will be added to hdb tree.
imot_, Motor interface function, eg run, status.
get_, Tcl code will be evaluated when "mot list" is called.
Add debug info.
Histmem now only calls TaskYield after SICS has finished initalising, this stops the statusfile task from being called early and overwriting the status file. Created ANSTO_MakeHistMemory command to install ANSTO_HistAction
Added veto functions. Mapped the HistDriver interface Pause() and Continue() commands to AnstoHttpVeto and AnstoHttpNoVeto. Implemented an ANSTO_Histaction to call AnstoHttpPause when sent a "pause" subcommand.
hmcontrol_ansto.c
Call AnstoHttpPause() directly when Pause_HM_After_Count is set to preserver current behaviour.
counterdriv.c
Now sends the correct "SICS RESUME" command to resume a paused count.
ansto_sctdriveadapter.c NEW
This lets you create driveable objects from script-context controllers which have one node for setting a parameter and another node for reading the parameter (eg temperature controllers, choppers, velocity selectors)
sctemonadapter.c NEW
This generates an environment monitor interface for script-context controllers so that the emon object in SICS will be able to pause counters if the controller goes out of tolerance.
sct_usbtmcprot.c, usbtmc.h NEW
First attempt at a protocol handler for USB Test and Measurement Class devices
sct_julabo_lh45.tcl NEW
Implements script-context controller for the Julabo LH45 temperature controller.
Makefile
Added ansto_sctdriveadapter and sctemonadapter
hardsup/makefile
Added velocity selector and usbtmc protocol handlers
hardsup/sct_velselprot.c
Simplified, don't worry about trying to implement a login handler for now, just implement a "Reading" handler.
site_ansto.c
Add the velocity selector and USBTMC protocol handlers.
Added the ANSTO_MakeHM command
instrument/config/hipadaba/common_instrument_dictionary.tcl
Added support for auxiliary data, ie extra meta-data entries in the "data" group of the nexus file.
Add new NXvelocity_selector object under /instrument.
instrument/config/hipadaba/hipadaba_configuration_common.tcl
Add the new "sct_object" script-context controller objects to the hdb tree.
instrument/config/hipadaba/instdict_specification.tcl
Define the new sct_object controllers.
instrument/config/hmm/hmm_configuration_common_1.tcl
Use the new ANSTO_MakeHM command to create histmem drivers which support veto.
Define allowed attributes and elements for the BAT_TABLE and FAT_TABLE
Stop between counts instead of pausing because setting pause now sends a veto.
instrument/config/motors/sct_jogmotor_common.tcl
You now need to specify klass when creating a jogmotor.
instrument/config/motors/sct_positmotor_common.tcl
You can now specify an optional function which calculates the instrument parameter (eg attenuation) from a posit table entry when defining a posit motor.
instrument/config/nexus/nxscripts_common_1.tcl
Report file status info in the /experiment section of the hdb tree. Add auxiliary data to data file.
Handle saving data from script-context controller objects.
instrument/util/script_context_util.tcl
Added procedure to set required properties for saving script-context object data.
instrument/util/utility.tcl
Added set_sct_object_attributes proc to automatically set required attributes on SCT_OBJECTs
Fixed hlistplainprop to deal with empty property fields on hdb nodes.
instrument/server_config.tcl
Call the new nexus initialisation command and set attributes on sct objects.
hrpd/config/motors/motor_configuration.tcl
New absenc home readings for mchi and mphi. New absenc home and range for mf1
hipd/config/commands/commands.tcl
Exported and published the new ajscmds so that they can be used in batch files.
hipd/config/motors/motor_configuration.tcl
New mchi absenc home
rsd/config/hmm/hmm_configuration.tcl
Provide support for saving corrected hmm data
rsd/config/motors/motor_configuration.tcl
Use simple names for motors.
SICS-329
sans/config/INSTCFCOMMON.TXT
Added julabo and lakeshore configuration files to list.
sans/config/optics/guide_configuration.tcl
Added entrance aperture positions to the configuration table and the cn_maps which map the index to the component ID.
sans/commands/commands.tcl
The "guide" command now set EApPosYmm after driving the guides in place.
The indexed position to component maps (cn_map) have been moved to the guide_configuration.tcl file.
sans/motors/motor_configuration.tcl
Set samy home to 56.1mm
sans/config/velsel/sct_velsel.tc NEW
Implements script-context controller object for the NVS40 velocity selector. TODO tilt-angle control, driveable interface.
sans/config/hmm/hmm_configuration.tcl
Set 5.08mm spacing on detector width. Use pixel-offset for vertical and horizontal detector axes.
sans/config/motors/motor_configuration.tcl
Swap directions of beamstops 4 and 5 (the two smallest)
New config parameters for samx, samthet, apx, det, detoff, bsz,
sans/config/motors/positmotor_configuration.tcl
Added descriptive headers to positmotor configuration tables and new synstax for the make positmotor command.
sans/config/nexus/nxscripts.tcl
Implemented initialisation command.
sans/config/parameters/parameters.tcl
Added SampleThickness and TransmissionFlag. Calculate SamplePosYmm from samy and SamyOffsetmm.
Added beamstops to hdb tree.
reflectometer/config/nexus/nxscripts.tcl
Implement the initialisation procedure.
r2767 | ffr | 2009-03-31 10:16:54 +1100 (Tue, 31 Mar 2009) | 123 lines
sans/config/hmm/detector.tcl
Use dns-name for voltage controller address.
sans/config/motors/motor_configuration.tcl
Set det home position.
SICS-122 Added FastShutter variable and configured det motor with an action object to set the FastShutter variable.
SICS-248 Replaced beamstop motor objects with beamstop action objects.
action.[ch]
The action object factory will eventuall be defined here.
SICS-122 Currently there is just a funcion which sets the FastShutter variable
beamstopaction.c
Added motion control enabled check.
Added "list" subcommand.
Makefile
Compile action.c
motor_dmc2280.c
The status check command now always checks the TI1 and TI0 interrupts.
Added action-object configuration parameter. Call AO_istatus with TI1
if configured with an action object.
r2674 | ffr | 2008-08-13 14:16:30 +1000 (Wed, 13 Aug 2008) | 26 lines
You can now run the oscillating collimator for a specified number of cycles.
A MOTEND event is now sent when the oscillator stops.
Also temporarily set status to eEager to allow changing the motor accesscode parameter while something else is running, (eg a counter)
motor.c
finishDriving is no longer static so we can call it from the oscilator and generate a MOTEND event.
west4100.c
Return 'success' from wrapper on "controlsensor" and "sensorlist" queries so we can test and capture their values in scripts.
Makefile
Compile the quokka beamstopaction object
site_ansto.c
Add the MakeActionObject command. Currently only makes the hardcoded beamstopaction object
obpar.c
Report object name and parameter on an illegal attempt to set a parameter
hmm_configuration_common_1.tcl
Add oscillating collimator control flag for Wombat. If true we use hmm to start the histogram server instead of hmc. TODO remove hmc and always use hmm.
hipd/config/motors/motor_configuration.tcl
Don't load anticollider config twice. Fix oct limits
wombat_configuration.tcl
Environment configuration must be loaded before running server_init.
hrpd/config/hmm/hmm_configuration.tcl
Fix default time-bin to match 10Hz frame frequency
hrpd/config/motors/motor_configuration.tcl
Added dummy motor for testing.
reflectometer/config/hmm/detector.tcl
Fill in dhv1 configuration parameters.
sans/config/hmm/detector.tcl
Enable detector voltage control
sans/config/hmm/hmm_configuration.tcl
SICS-227 set default resolution to 192x192
sans/config/motors/motor_configuration.tcl
Added dummy motor for testing
quokka parameters.tcl
Fix L2mm calculation, Fix SICS-228 users cannot set rotapdeg
beamstopaction.[ch]
NEW: Implements an action command to drive the quokka beamstops up and down.
r2670 | ffr | 2008-08-07 13:17:29 +1000 (Thu, 07 Aug 2008) | 53 lines
Status is now updated on demand.
A status request returns a ready status message for the chopper as well as updating the chopper parameters.
We don't compensate for MW CMW on choppers 2 and 3.
PHASETOL=0.2
You can read the frequency from chopper one.
r2193 | ffr | 2007-10-23 12:58:13 +1000 (Tue, 23 Oct 2007) | 8 lines
