Also made generic so you can create a temperature control for example instead of a speed based control.
r3218 | ffr | 2011-06-20 10:02:04 +1000 (Mon, 20 Jun 2011) | 2 lines
The post_count callback should be called when the count ends.
quokka_configuration.tcl
Added lakeshore 336, qlink, and rheometer configurations.
quokka sct_flipper.tcl
Report "-1" for fields which return corrupt or invalid readings.
quokka environment.tcl
Implement histogram memory pre_count and post_count callbacks to record temperature before and after an acquisition.
quokka motor_configuration.tcl
Set correct max speed for detector motor, ie it is now 53mm/s instead of 40
wombat_configuration.tcl
Added lakeshore 336 driver and julabo and qlink.
r3034 | ffr | 2010-12-03 11:07:49 +1100 (Fri, 03 Dec 2010) | 17 lines
Don't make the temperature getset-macro or select the control sensor for the script validator instance of SICS. (fixed in-situ)
Use new ls340 and ls336 controllers.
script_context_util.tcl
Modified hinitprops so that it can take sub-paths
nxscripts_common_1.tcl
Added ::nexus::OnFirstsave ::nexus:OnLastSave to register commands which will be executed on the first and last save of a data file.
sct_julabo_lh45.tcl
Added start_temperature and end_temperature parameters to record the initial and final temperature readings in the data files.
Also only set the setpoint if the Julabo is in remote mode.
sct_positmotor_common.tcl
Report 99999 if a posit motor table is out of range.
quokka guide_configuration.tcl
Updated aperture size for p1, p1lp, p1lens in the guide configuration table.
r2969 | ffr | 2010-07-01 22:09:09 +1000 (Thu, 01 Jul 2010) | 20 lines
Added a /sample/temperature node which links to the sensor reading for the ls340 on the 11T magnet
sct_julabo_lh45.tcl
Fixed regression which stopped tc1 interface from being linked into sample group.
r2942 | ffr | 2010-05-28 16:32:28 +1000 (Fri, 28 May 2010) | 6 lines
