Histmem now only calls TaskYield after SICS has finished initalising, this stops the statusfile task from being called early and overwriting the status file. Created ANSTO_MakeHistMemory command to install ANSTO_HistAction
Added veto functions. Mapped the HistDriver interface Pause() and Continue() commands to AnstoHttpVeto and AnstoHttpNoVeto. Implemented an ANSTO_Histaction to call AnstoHttpPause when sent a "pause" subcommand.
hmcontrol_ansto.c
Call AnstoHttpPause() directly when Pause_HM_After_Count is set to preserver current behaviour.
counterdriv.c
Now sends the correct "SICS RESUME" command to resume a paused count.
ansto_sctdriveadapter.c NEW
This lets you create driveable objects from script-context controllers which have one node for setting a parameter and another node for reading the parameter (eg temperature controllers, choppers, velocity selectors)
sctemonadapter.c NEW
This generates an environment monitor interface for script-context controllers so that the emon object in SICS will be able to pause counters if the controller goes out of tolerance.
sct_usbtmcprot.c, usbtmc.h NEW
First attempt at a protocol handler for USB Test and Measurement Class devices
sct_julabo_lh45.tcl NEW
Implements script-context controller for the Julabo LH45 temperature controller.
Makefile
Added ansto_sctdriveadapter and sctemonadapter
hardsup/makefile
Added velocity selector and usbtmc protocol handlers
hardsup/sct_velselprot.c
Simplified, don't worry about trying to implement a login handler for now, just implement a "Reading" handler.
site_ansto.c
Add the velocity selector and USBTMC protocol handlers.
Added the ANSTO_MakeHM command
instrument/config/hipadaba/common_instrument_dictionary.tcl
Added support for auxiliary data, ie extra meta-data entries in the "data" group of the nexus file.
Add new NXvelocity_selector object under /instrument.
instrument/config/hipadaba/hipadaba_configuration_common.tcl
Add the new "sct_object" script-context controller objects to the hdb tree.
instrument/config/hipadaba/instdict_specification.tcl
Define the new sct_object controllers.
instrument/config/hmm/hmm_configuration_common_1.tcl
Use the new ANSTO_MakeHM command to create histmem drivers which support veto.
Define allowed attributes and elements for the BAT_TABLE and FAT_TABLE
Stop between counts instead of pausing because setting pause now sends a veto.
instrument/config/motors/sct_jogmotor_common.tcl
You now need to specify klass when creating a jogmotor.
instrument/config/motors/sct_positmotor_common.tcl
You can now specify an optional function which calculates the instrument parameter (eg attenuation) from a posit table entry when defining a posit motor.
instrument/config/nexus/nxscripts_common_1.tcl
Report file status info in the /experiment section of the hdb tree. Add auxiliary data to data file.
Handle saving data from script-context controller objects.
instrument/util/script_context_util.tcl
Added procedure to set required properties for saving script-context object data.
instrument/util/utility.tcl
Added set_sct_object_attributes proc to automatically set required attributes on SCT_OBJECTs
Fixed hlistplainprop to deal with empty property fields on hdb nodes.
instrument/server_config.tcl
Call the new nexus initialisation command and set attributes on sct objects.
hrpd/config/motors/motor_configuration.tcl
New absenc home readings for mchi and mphi. New absenc home and range for mf1
hipd/config/commands/commands.tcl
Exported and published the new ajscmds so that they can be used in batch files.
hipd/config/motors/motor_configuration.tcl
New mchi absenc home
rsd/config/hmm/hmm_configuration.tcl
Provide support for saving corrected hmm data
rsd/config/motors/motor_configuration.tcl
Use simple names for motors.
SICS-329
sans/config/INSTCFCOMMON.TXT
Added julabo and lakeshore configuration files to list.
sans/config/optics/guide_configuration.tcl
Added entrance aperture positions to the configuration table and the cn_maps which map the index to the component ID.
sans/commands/commands.tcl
The "guide" command now set EApPosYmm after driving the guides in place.
The indexed position to component maps (cn_map) have been moved to the guide_configuration.tcl file.
sans/motors/motor_configuration.tcl
Set samy home to 56.1mm
sans/config/velsel/sct_velsel.tc NEW
Implements script-context controller object for the NVS40 velocity selector. TODO tilt-angle control, driveable interface.
sans/config/hmm/hmm_configuration.tcl
Set 5.08mm spacing on detector width. Use pixel-offset for vertical and horizontal detector axes.
sans/config/motors/motor_configuration.tcl
Swap directions of beamstops 4 and 5 (the two smallest)
New config parameters for samx, samthet, apx, det, detoff, bsz,
sans/config/motors/positmotor_configuration.tcl
Added descriptive headers to positmotor configuration tables and new synstax for the make positmotor command.
sans/config/nexus/nxscripts.tcl
Implemented initialisation command.
sans/config/parameters/parameters.tcl
Added SampleThickness and TransmissionFlag. Calculate SamplePosYmm from samy and SamyOffsetmm.
Added beamstops to hdb tree.
reflectometer/config/nexus/nxscripts.tcl
Implement the initialisation procedure.
r2767 | ffr | 2009-03-31 10:16:54 +1100 (Tue, 31 Mar 2009) | 123 lines
hipd/config/commands/commands.tcl
Added some of the procedures in extraconfig.tcl as "commands"
motors/sct_jogmotor_common.tcl
Added stop command. Send SH, JG and BG commands on one line when jogging motor.
fakeDMC
dmc2280Server.tcl
mkSimAxes.tcl
simAxis.tcl
Added jog command.
exebuf.c
Batch file executor now sends a BATCHEND event when there is an AbortBatch interrupt.
This means we can now execute cleanup comands when a batch file terminates.
r2764 | ffr | 2009-01-23 16:06:03 +1100 (Fri, 23 Jan 2009) | 17 lines
SICS-226
util/utility.tcl
Added set_chopper_attributes to set hdb metadata on chopperadapters
server_config.tcl
Set hdb metadata on chopperadapters
hipadaba_configuration_common.tcl
:hdb::sobjadd can now add chopperadapters to the hdb tree
::hdb::cmd_par now preserves case when adding command parameters.
instdict_specification.tcl
Added chopperadapter sicstype and disk_chopper class
nxscripts_common_1.tcl
Added chopperadapter save and sdsinfo commands.
reflectometer/config/chopper/chopper.tcl
Set units on chopperadapters.
##################################
hipd,hrpd,rsd, /config/commands.tcl
Add instrument specific initialisation procedure for commands
reflectometer/config/commands.tcl
Created omega_2theta and set_mode commands from Andrew Nelson's procs in extraconfig.tcl
reflectometer/.../motor_configuration.tcl
Added ds and rs prefix to the two_theta drive and read scripts to prevent name collision with the two_theta procs in commans.tcl
SICS-108 reflectometer/../parameters.tcl
Added parameters for guide, slit and chopper distances and elements.
SICS-108 common_instrument_dictionary.tcl
Make parameters saveable
r2678 | ffr | 2008-08-18 13:01:29 +1000 (Mon, 18 Aug 2008) | 40 lines
commands_common.tcl
Added ::motor::go_home command to run motors to their home positions.
hrpd,hipd,rsd,sans,reflectometer/commands.tcl
Initilise ::motor::is_homing_list for the ::motor::go_hom command
util/command.tcl
Allow an empty parameter list
server_config.tcl
Call the "commands" initilisation function on server init
motor_asim.c
Added the "home" parameter so we can test the go_home command
r2677 | ffr | 2008-08-14 15:00:18 +1000 (Thu, 14 Aug 2008) | 17 lines
