linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3,544 Commits 1 Branch 0 Tags
6f5f2b69cf35005dd300f7147b8f937c7c94a6c3
Commit Graph

126 Commits

Author SHA1 Message Date
Ferdi Franceschini
093479f808 SICS-697 Make named links to data group using new typed naming system. 2013-12-20 09:08:49 +11:00
Douglas Clowes
0266abbd94 Change the temperature factor from 10.0 to 20.0 
This refelcts the firmware update to the RVA ROM removing the factor
of 2.0 for the temperature reading and setting
 2013-12-16 13:36:35 +11:00
Ferdi Franceschini
95369d3454 Make naming scheme for west4100 temperature controller consistent with other drivers. 2013-10-28 15:33:44 +11:00
Ferdi Franceschini
4812644b66 Modify west4100 configuration to load the driver if it has been 
selected in a sics_config.ini file.
 2013-10-28 15:33:43 +11:00
Ferdi Franceschini
ad3aa5cd3b Use sics_config.ini to configure LS370, oxford ITC, oxford Mercury, and oxford labview drivers. 2013-10-15 03:25:22 +11:00
Ferdi Franceschini
7bacc4dc7f Use sics_config.ini to generate 12T magnet setup on Taipan. 2013-09-18 16:16:06 +10:00
Douglas Clowes
f5dd71f4fb Get sct_lakeshore_370.tcl saving data to nexus files 2013-08-21 15:26:02 +10:00
Ferdi Franceschini
564b7c9bd5 Use the selected sensor (external or bath) to report temperature from a Julabo 2013-08-15 08:03:34 +10:00
Douglas Clowes
40c0bf7d9e Remove LS370 logging to stdout 2013-07-15 13:01:35 +10:00
Douglas Clowes
73536234fe Add a new sct driver for the Watlow RM, based on the Watlow PM driver 2013-07-04 15:39:24 +10:00
Douglas Clowes
7d35ca4cf9 Allow 'aqadapter' as the IP and the AsyncQueue name as the port for Lakeshores 2013-06-27 16:36:06 +10:00
Douglas Clowes
5970a05aaa Make the ls370 sct controller name consistent with ls336 and ls340 2013-06-19 12:35:46 +10:00
Jing Chen
17d72343e7 Removed old error message 2013-05-17 07:34:29 +10:00
Ferdi Franceschini
b98ff24528 Added configuration file changes from ics1-pelican 2013-04-20 17:53:17 +10:00
Jing Chen
39a3e0ab19 add HDB nodes 
r3770 | jgn | 2012-10-18 14:54:11 +1100 (Thu, 18 Oct 2012) | 1 line
 2012-11-15 17:40:51 +11:00
Jing Chen
3a1bd2192c comment out the driver line 
r3767 | jgn | 2012-10-15 14:11:04 +1100 (Mon, 15 Oct 2012) | 1 line
 2012-11-15 17:40:36 +11:00
Jing Chen
18a3a0b028 r3762 | jgn | 2012-10-09 13:42:17 +1100 (Tue, 09 Oct 2012) | 1 line 2012-11-15 17:40:11 +11:00
Douglas Clowes
62d894b9e7 First Working Version against "SCPI" protocol Mercury 
r3733 | dcl | 2012-09-11 11:40:48 +1000 (Tue, 11 Sep 2012) | 1 line
 2012-11-15 17:37:52 +11:00
Douglas Clowes
81605a11a1 Driver for the Oxford Mercury Temperature Controller (WIP) 
r3732 | dcl | 2012-09-03 13:37:30 +1000 (Mon, 03 Sep 2012) | 1 line
 2012-11-15 17:37:47 +11:00
Douglas Clowes
d6ad841174 Set auto by default on startup - as per Paolo 
r3679 | dcl | 2012-07-26 15:45:13 +1000 (Thu, 26 Jul 2012) | 1 line
 2012-11-15 17:34:46 +11:00
Ferdi Franceschini
a6fd5af72c Made the isobus address configurable for the Oxford Mercury ITC. 
NOTE: Address is option and defaults to @1
Eg Set tol=5.0 and isobus address= @8 for the Mercury ITC
add_itc500 tc1 localhost 7777 5.0 "@8"

r3642 | ffr | 2012-07-13 15:48:30 +1000 (Fri, 13 Jul 2012) | 5 lines
 2012-11-15 17:33:03 +11:00
Ferdi Franceschini
d99d9cc7ee SICS-435: Save setpoint in data file. 
r3612 | ffr | 2012-06-19 20:42:15 +1000 (Tue, 19 Jun 2012) | 2 lines
 2012-11-15 17:31:11 +11:00
Ferdi Franceschini
f498b3ce6a sct_julabo_lh45.tcl 
Add bath temperature to feedback.   Allow switching between reading the
bath or external sensor for the sensor value. Check the data type of
replies from the Julabo because it can return values like "___.__" if
you're reading the wrong sensor.

sct_lakeshore_340.tcl, sct_lakeshore_336.tcl
Use the tolerance set on the control/tolerance node so the user can
change it while running.

r3348 | ffr | 2012-01-20 15:25:46 +1100 (Fri, 20 Jan 2012) | 10 lines
 2012-11-15 17:23:22 +11:00
Douglas Clowes
b7bb5f7e9b Lakeshore 370 AC "Resistance Bridge" Temperature Controller 
r3343 | dcl | 2012-01-16 17:39:14 +1100 (Mon, 16 Jan 2012) | 1 line
 2012-11-15 17:23:00 +11:00
Douglas Clowes
a172bed449 Add ";*IDN?" in SetValue and setPoint functions (after commands that don't elicit a response) to force a response that avoids the timeout and reconnect sequence that gives problems on the LS336 
r3259 | dcl | 2011-10-18 16:13:01 +1100 (Tue, 18 Oct 2011) | 1 line
 2012-11-15 17:16:47 +11:00
Douglas Clowes
c765c33f6d Make instance data properties of a params node instead of namespace global variables 
This is to allow multiple instance of the same device type without clashing of persistent data
r3248 | dcl | 2011-08-22 11:30:20 +1000 (Mon, 22 Aug 2011) | 3 lines
 2012-11-15 17:16:07 +11:00
Ferdi Franceschini
5e50f2cb43 Removed the dependency on some global variables so that you can drive 
two lakeshore controllers.  Most of the remaining globals are harmless
or unused but they should be removed.

r3237 | ffr | 2011-08-12 08:41:56 +1000 (Fri, 12 Aug 2011) | 4 lines
 2012-11-15 17:15:59 +11:00
Ferdi Franceschini
f66a91d6d6 Remove accidental commit 
r3214 | ffr | 2011-06-20 09:45:22 +1000 (Mon, 20 Jun 2011) | 1 line
 2012-11-15 17:14:19 +11:00
Ferdi Franceschini
c1b90c4f7d Added rva_datafile name and added rva to /sample group 
r3151 | ffr | 2011-05-20 12:02:45 +1000 (Fri, 20 May 2011) | 1 line
 2012-11-15 17:13:57 +11:00
Douglas Clowes
afa42563a0 Implement a reset capability 
r3150 | dcl | 2011-05-20 10:26:59 +1000 (Fri, 20 May 2011) | 1 line
 2012-11-15 17:13:53 +11:00
Douglas Clowes
df6f44a2ac Change limits and tolerance 
r3149 | dcl | 2011-05-20 10:25:05 +1000 (Fri, 20 May 2011) | 1 line
 2012-11-15 17:13:49 +11:00
Douglas Clowes
f0ac8f82d9 Implement driveable and end of drive condition 
r3148 | dcl | 2011-05-20 10:21:08 +1000 (Fri, 20 May 2011) | 1 line
 2012-11-15 17:13:44 +11:00
Douglas Clowes
e65cc662c6 Add read of tower down switch 
Must be down to run test
r3146 | dcl | 2011-05-19 12:47:06 +1000 (Thu, 19 May 2011) | 3 lines
 2012-11-15 17:13:36 +11:00
Ferdi Franceschini
579fd8ebd0 sct_oxford_itc.tcl 
Revert changes to drving state.
r3136 | ffr | 2011-05-19 08:39:00 +1000 (Thu, 19 May 2011) | 2 lines
 2012-11-15 17:12:52 +11:00
Douglas Clowes
c62f3dd24b Adjust ramp rate to 1/45 instead of 1/32 and calculate ramp anyway 
r3130 | dcl | 2011-05-11 10:11:50 +1000 (Wed, 11 May 2011) | 1 line
 2012-11-15 17:12:31 +11:00
Douglas Clowes
4303047433 Lift limit on profile size and partial implementation of drive command 
r3129 | dcl | 2011-05-10 16:13:07 +1000 (Tue, 10 May 2011) | 1 line
 2012-11-15 17:12:27 +11:00
Douglas Clowes
b543716643 Allow ASCII CSV profile input 
In the format
<type>,<time>,<value>,<ramp>
r3126 | dcl | 2011-05-06 12:34:08 +1000 (Fri, 06 May 2011) | 4 lines
 2012-11-15 17:12:14 +11:00
Douglas Clowes
3be707a269 Add load_status, final_time and idle_temp as properties of profile 
r3125 | dcl | 2011-05-04 16:33:42 +1000 (Wed, 04 May 2011) | 1 line
 2012-11-15 17:12:09 +11:00
Ferdi Franceschini
c7929ccc4e The "inTolerance" proc now updates the "timecheck" and "timecheck2" values when the setpoint command has been sent and transitions the "writestatus" to "ws_monitor". This ensures that the timeout for the settletime is reset when a new setpoint has been sent. 
r3116 | ffr | 2011-04-27 15:38:29 +1000 (Wed, 27 Apr 2011) | 1 line
 2012-11-15 17:11:31 +11:00
Ferdi Franceschini
db80d30cc2 Revert code so that the "driving" status is set by the tcl setpoint procedure. 
The "inTolerance" script only resets the "driving" flag after the setpoint has been sent, ie after "writestatus" transitions to the sent state.
The "checktol" script now compares the sensor reading against the setpoint "target" value instead of the setpoint reading from the lakeshore, this should allow the drive command to work properly if ramping has been enabled on the lakeshore
r3115 | ffr | 2011-04-27 11:11:00 +1000 (Wed, 27 Apr 2011) | 3 lines
 2012-11-15 17:11:26 +11:00
Douglas Clowes
9acffeb772 WIP update 
r3104 | dcl | 2011-04-18 14:42:07 +1000 (Mon, 18 Apr 2011) | 1 line
 2012-11-15 17:10:35 +11:00
Douglas Clowes
3cf7bfbf50 Add RVA SC driver and associated Newport protocol 
r3081 | dcl | 2011-03-24 14:51:13 +1100 (Thu, 24 Mar 2011) | 1 line
 2012-11-15 17:09:12 +11:00
Ferdi Franceschini
7371a561d9 Make sure spin flipper code in rfamp.c is initialised 
Fixed drive bugs in lakeshore drivers.
r3071 | ffr | 2011-02-25 18:27:31 +1100 (Fri, 25 Feb 2011) | 2 lines
 2012-11-15 17:08:46 +11:00
Douglas Clowes
84d02dec64 update initialisation and add code to use controller limit function 
r3058 | dcl | 2011-02-16 16:31:01 +1100 (Wed, 16 Feb 2011) | 1 line
 2012-11-15 17:07:49 +11:00
Ferdi Franceschini
202bb2869a servlog.c 
Fix month in logfile name and put date in all log file names.
sct_protek_common.tcl
Catch non-numeric readings from main multimeter display
Added support for a callbank function which is called after reportVal

sct_julabo_lh45.tcl
Clear the geterror property when getting a new reading.
Don't set the overtemp and subtemp warning limits because this can cause the julabo to alarm.
Do nothing if the setpoint hasn't been updated.
Set default settletime to 60s and the default error handler to "lazy".
Added start_temperature and end_temperature which are updated by callbacks on the histogram memory control.

sct_lakeshore_340.tcl
Set the type for the setpoint nodes to drivable
r3032 | ffr | 2010-12-02 14:03:44 +1100 (Thu, 02 Dec 2010) | 15 lines
 2012-11-15 17:06:45 +11:00
Douglas Clowes
2e0780f2b1 Watlow PM 
r3028 | dcl | 2010-11-12 14:54:14 +1100 (Fri, 12 Nov 2010) | 1 line
 2012-11-15 17:06:28 +11:00
Douglas Clowes
1f3a585b6e Quad Watlow ST controller Sample Changer 
r3027 | dcl | 2010-11-12 14:53:12 +1100 (Fri, 12 Nov 2010) | 1 line
 2012-11-15 17:06:24 +11:00
Douglas Clowes
f776135904 reset error message on good read and adjust code indent 
r3026 | dcl | 2010-09-14 11:34:59 +1000 (Tue, 14 Sep 2010) | 2 lines
 2012-11-15 17:06:20 +11:00
Douglas Clowes
33cfcefa8a implement device address and refactor modbus-command to send functions 
device address was hard coded and command was embedded in each node

r3025 | dcl | 2010-09-14 11:33:41 +1000 (Tue, 14 Sep 2010) | 4 lines
 2012-11-15 17:06:16 +11:00
Ferdi Franceschini
6a3f6889e0 New lakeshore drivers separated out from the 3xx driver. 
r2974 | ffr | 2010-07-02 14:04:58 +1000 (Fri, 02 Jul 2010) | 2 lines
 2012-11-15 17:05:03 +11:00