- If SctProcessNode ran into a timeout, its action data wa sdeleted. If data came
later, this caused SICS to crash. This is now fixed
- sget leaked connections under certain circumstances
- Cosmetic fix to hipadaba.c
- yet another chnage to the TRICS file format in fourmess.c, now it prints magnetic field
instead of the proton count
- Fixed a bug in processnode which hangs SICS when processnode is called from multiple
clients on the same node
- Fixed a bug in multicountsersec which caused thrashing of the Tcl results which caused ugly
error messages when calling the transfer script. Now a copy of the connection is made
before calling the transfer script
- Added a processnode methos to scriptcontext. processnode waits for the
scriptchain of a node to finish.
- Fixed a bug in sicsget
- Made histmemsec dim and rank manager privilege. To allow chnage at runtime.
Is required for SANS
- Fixed some issues with multicountersec, mostly relating to passing things through
in a sensible way.
- Updated motorsec.c to work with a client based driver
SKIPPED:
psi/polterwrite.c
psi/tabledrive.c
psi/tabledrive.h
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
SKIPPED:
psi/ease.c
psi/faverage.c
psi/jvlprot.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinq.c
psi/spss7.c
the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
SKIPPED:
psi/autowin.c
psi/eigera2.c
psi/jvlprot.c
psi/makefile_linux
psi/sinqhttpopt.c
psi/tasscan.c
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
SKIPPED:
psi/jvlprot.c
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/spss7.c
- Extended confvirtmot to have a checkscript
- Made sure that targets get updated when calling tasdrive
- Fixed some output codes in tasdrive.c
- Made tdchm invoke counters event message for Melone
- Fixed the ConID inefficiency by caching the host name in asynnet.c
- Added a traceActive function to trace
SKIPPED:
psi/tdchm.c
- New NeXus libraries
- Added new raw binary transfer mode for mass data
- Added a check script option to configurable virtual motor
SKIPPED:
psi/dumprot.c
psi/make_gen
psi/psi.c
psi/rebin.c
psi/sanslirebin.c
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
- introduced <controller> reconnect function
- list seconds of minute in debugging mode
- "sct utime" may be used from scripts to get the milliseconds time
- Fixes to make the second generation velocity selector driver work
- Modified obpar.c to allow parameter changes while running. This makes
it possible to collect data at TRICS while cooling down.
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
- killing a node using sct should now be safe
- sctdrive adapter object might be dynamic
- default for the checkstatus script: returning the status property
- introduced <sctcon> unpoll
- changed <sctcon> queuecon to <sctcon> send
- some more improvements in sct
