- In support of HMsec, allow the count command in countsec to run without a
preset parameter. If this is missing the old, stored preset is used.
- Removed a check which causes initialisation of the HM from a batch file fail
for POLDI
- fixed @nl@ encoding of \n problem with certain kinds of batch files generated by GTSE
- Fixed a bug with summing on hitsmemsec. nxdataset now uses 64 bit int for dimensions.
- Fixed motorsec to remove itself properly from a parent when linked. Please note
that there is still the limitation that a second generation motor can only be linked
once in a Hipadaba tree
- Extended subsampling a HM for second generation HM
- Added a hscriptnotify. This calls a script on the update of a node
- POLDI has been rebuilt, chnages to data file writing
- For testing, sinqhttopt now understands a special command, byteswapoff,
which switches off byte swapping. Required when the HM ius run on an Intel box.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
- Added error fields to hwardware objects: motor, counter, histmem
- Optimised sinqhttpopt
- Added haddcheck which adds checks to hipadaba nodes. The current implementation
only checks for selctions agaisnt the values property. Expand when more checks are
required.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
psi/tasinit.c
- Fixed some issues with error returns not being properly handled in devexec
- Fixed a bug in motorlist which caused limit checks to fail
- Fixed an issue with the TDCHM not properly updating the counter
values on finish
- Readded getHipadabaPar in ChainCallback as this caused a problem in ei
- Made tasdrive ignore sgu, sgl when out of plane not allowed
SKIPPED:
psi/eigermono.c
psi/sinqhttp.c
psi/tdchm.c
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
SKIPPED:
psi/eigermono.c
psi/make_gen
psi/makefile_linux
psi/psi.c
psi/sinqhttp.c
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
SKIPPED:
psi/ease.c
psi/faverage.c
psi/jvlprot.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinq.c
psi/spss7.c
the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
SKIPPED:
psi/autowin.c
psi/eigera2.c
psi/jvlprot.c
psi/makefile_linux
psi/sinqhttpopt.c
psi/tasscan.c
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
SKIPPED:
psi/cnvrt.c
psi/cnvrt.h
psi/el734hp.c
psi/make_gen
psi/sinqhttpopt.c
psi/sinqhttpprot.c
psi/spss7.c
psi/swmotor.c
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
SKIPPED:
psi/amorstat.c
psi/make_gen
psi/makefile_linux
psi/polterwrite.c
psi/sinq.c
psi/sinqhttp.c
psi/sinqhttpprot.c
psi/sps.c
psi/tdchm.c
- Fixed a stack overrun bug in macro.c
- Fixed a killing bug in devser.c
- Added node writing with offset to nxscript.c
- Wrote a simulation driver for second generation HM's
- Readded devexec commands to SICS
- Readded Hipadaba initialisation to SICS
- Fixed a bug in sinqhttprot.c which is triggered when a reconnect happens
during a node based download of data.
SKIPPED:
psi/sinqhttpprot.c
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
- Added a drivable adapter to scriptcontext nodes
- Added subsampling to simulated histograms (and as a general option) in
order to support Gumtree testing.
- Fixed a bug in hmdata.c
- Fixed an issue with tempoerature writing through RemObjects in mesure
- Added auxiliary reflections to tasub
- Make maximize use soft motor positions
- Fixes to make RITA work
- tasub extended to calculate UB from cell alone, support for elastic mode
- New MultiCounter as abstraction for counting on HM's
- regression test driver for counters
- Changes to Hipadaba
- Added project to histogram memory code
- Started regression testing code
- Added hill climbing as optimization method to optimise
- Mended tasdrive to drive energy even if Q is askew
- Fixed QM values
- Fixed problems in mesure: om2th, wrong theta selection
- Fixed core dump when driving h,kl, failed
- Introduced a help system
- introduced a module for handling automatic updates of files during
long measurements
- Added a circular buffer and handling facilities to varlog
- Upgraded documentation
SKIPPED:
psi/faverage.h
psi/nxamor.tex
psi/pimotor.h
psi/pimotor.tex
- Fixed synchronisation issues
- Fixed hsitogram memory writing from nxscript
- Started module for writing SICS interfaces in Tcl
- Fixed a bug in scan, which allowed to corrupt files
- Fixed memory problems in napi5
