Initial revision

doc/user/sansman

@@ -0,0 +1,63 @@
+\documentclass[12pt,a4paper]{report}
+%%\usepackage[dvips]{graphics}
+\usepackage{epsf}
+\setlength{\textheight}{24cm}
+\setlength{\textwidth}{16cm}
+\setlength{\headheight}{0cm}
+\setlength{\headsep}{0cm}
+\setlength{\topmargin}{0cm}
+\setlength{\oddsidemargin}{0cm}
+\setlength{\evensidemargin}{0cm}
+\setlength{\hoffset}{0cm}
+\setlength{\marginparwidth}{0cm}
+
+\begin{document}
+%html -d hr " "
+%html -s report
+\begin{center}
+\begin{huge}
+SANS--User Manual \\
+\end{huge}
+Version 0.1, 10.6.1997\\
+Dr. Mark K\"onnecke \\
+Labor f\"ur Neutronenstreuung\\
+Paul Scherrer Institut\\
+CH--5232 Villigen--PSI\\
+Switzerland\\
+\end{center}
+\abstract{
+This is the users manual for the small angle scattering spectrometer SANS
+situated at SINQ, PSI, Switzerland. This instrument is operated through the
+SINQ instrument control software SICS. This is a client server system, with
+a server implementing the control operations and clients implementing the
+user interface. This manual describes the commands understood by SANS.
+Further information is available in the SICS's manager manual and the SICS
+programmers reference.
+}
+\clearpage
+
+%html sicsinvoc.htm 1
+%html general.htm 1
+%html basic.htm 1
+%html system.htm 1
+%html config.htm 1
+%html macro.htm  1
+%html buffer.htm 1
+%html drive.htm  1
+%html logbook.htm 3
+%html commandlog.htm 3
+%html optimise.htm 2
+%html token.htm  1
+%html sanscom.htm 1
+%html sansdev.htm 1
+%html motor.htm 1
+%html counter.htm 1
+%html histogram.htm 1
+%html velocity.htm 1
+%html velolambda.htm 1
+%html samenv.htm   1
+%html trouble.htm  1
+%html sanslist.htm 1
+%html saco.htm 1 
+
+\end{document}