linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial revision

Browse Source
This commit is contained in:
cvs
2000-02-07 10:38:55 +00:00
commit fdc6b051c9
846 changed files with 230218 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

132
doc/user/saco.htm Normal file
View File

@ -0,0 +1,132 @@
<html>
<head>
<title> SANS Command summary </title>
</head>
<body>
<h1>SANS command summary</h1>
<hr size=4 width="66%">
<p>
<h2>Most Used Commands</h2>
<dl>
<DT> <a href=sanscom.htm>bs</a> X = xval Y = yval
<DD> drive beam stop to xval yval
<DT> bs out
<DD> drive beamstop to safe position.
<DT> bs back
<DD> drive beamstop back
<DT> <a href=sanscom.htm>dt</a> X = xval Y = yval psi = angle
<DD> drive detector to xval,yval, angle
<DT> <a href=dmcdev.htm>count</a> mode preset
<DD> Counts in mode with a preset value of preset. Stores data automatically.
<DT> Repeat num mode preset
<DD> Calls count num times.
<DT><a href=macro.htm>FileEval</a> filename
<DD> Runs a batch file with the specified filename.
</DL>
</p>
<hr size=4 width="66%">
<h2> General commands </h2>
<p>
<DL>
<DT><a href=drive.htm>Success</a>
<DD> wait for the last operation to finish.
<DT><a href=system.htm>wait</a> time
<DD> wait for time to pass....
<DT><a href=system.htm>Dir</a>
<DD> lists all objects in the system.
<DT><a href=config.htm>config</a> Rights username password
<DD> changes authorisation to that of the user identified by username,
password.
<DT><a href=macro.htm>FileEval</a> filename
<DD> executes batch file filename.
</DL>
</p>
<h2>Velocity Selector</h2>
<p>
<dl>
<DT>nvs list
<DD> lists tilt angle and speed of the velocity selector.
<DT>nvs rot
<DD>prints rotation speed of the velocity selector.
<DT>nvs rot val
<DD>sets rotation speed of the velocity selector.
<DT>nvs tilt
<DD>prints tilt angle of the velocity selector.
<DT>nvs tilt val
<DD>sets tilt angle of the velocity selector.
<DT>nvs tilt val rot val2
<DD>sets both tilt angle and rotation speed of the velocity selector.
<DT><a href="velolambda.htm"> lambda</a>
<DD>prints current wavelength.
<DT>drive lambda val
<DD>drives velocity selector to a new wavelength.
</dl>
</p>
<h2> BeamStop </h2>
<p>
<DL>
<DT> <a href=sanscom.htm>bs</a> X = xval Y = yval
<DD> drive beam stop to xval yval
<DT> bsout
<DD> drive beamstop to safe position.
<DT> bsin
<DD> drive beamstop back
<DT> bs pos name
<DD> assign current position to name
<DT> bs drop name
<DD> delete named position name
<DT>bschange par
<DD>With parameter change beam stop, without: inquire about current beam stop.
</DL>
</p>
<h2> detector </h2>
<p>
<DL>
<DT> <a href=sanscom.htm>dt</a> X = xval Y = yval psi = angle
<DD> drive detector to xval,yval, angle
<DT> dt back
<DD> drive detector back
<DT> dt pos name
<DD> assign current position to name
<DT> dt drop name
<DD> delete named position name
</DL>
</p>
<h2> LogBook</h2>
<p>
<DL>
<DT><a href=logbook.htm>LogBook</a> file name
<DD> sets log file name
<DT> LogBook on
<DD> switches logging on
<DT>LogBook off
<DD> closes LogBook
<DT>LogBook
<DD> lists current logging status
</DL>
</p>
<h2> Variables</h2>
<p>
Each <a href=sanscom.htm>variable</a>
can be inquired by just typing its name. It can be set by
typing the name followed by the new value. Currently available variables
are:
<UL>
<LI>Title
<LI>User
<LI>Comment1
<LI>Comment2
<LI>environment
</UL>
</p>
</body>
</html>