Initial bilby configuration.

site_ansto/Makefile

@@ -163,6 +163,8 @@ kookaburra: all
 	make -C instrument/kookaburra
 dingo: all
 	make -C instrument/dingo
+bilby: all
+emu: all
 
 libansto.a: $(OBJ)
 	rm -f libansto.a

site_ansto/instrument/bilby/MANIFEST.TXT

@@ -0,0 +1,6 @@
+runsics_def.py
+bilby_configuration.tcl
+config
+util
+hostport_config.tcl
+hostport_config_test.tcl

site_ansto/instrument/bilby/bilby_configuration.tcl

@@ -0,0 +1,62 @@
+# Author: Ferdi Franceschini (ffr@ansto.gov.au)
+
+# Required by server_config.tcl 
+VarMake Instrument Text Internal
+Instrument bilby 
+Instrument lock
+
+#START SERVER CONFIGURATION SECTION
+source util/dmc2280/dmc2280_util.tcl
+source server_config.tcl
+MakeDrive
+#END SERVER CONFIGURATION SECTION
+
+########################################
+# INSTRUMENT SPECIFIC CONFIGURATION
+
+fileeval $cfPath(motors)/motor_configuration.tcl
+
+
+fileeval $cfPath(source)/source.tcl
+source $cfPath(hipadaba)/hipadaba_configuration.tcl
+fileeval $cfPath(motors)/positmotor_configuration.tcl
+fileeval $cfPath(velsel)/velsel.tcl
+fileeval $cfPath(parameters)/parameters.tcl
+fileeval $cfPath(plc)/plc.tcl
+fileeval $cfPath(optics)/optics.tcl
+fileeval $cfPath(counter)/counter.tcl
+fileeval $cfPath(environment)/temperature/sct_lakeshore_340.tcl
+fileeval $cfPath(environment)/temperature/sct_lakeshore_336.tcl
+fileeval $cfPath(hmm)/hmm_configuration.tcl
+fileeval $cfPath(nexus)/nxscripts.tcl
+fileeval $cfPath(hmm)/detector.tcl
+fileeval $cfPath(scan)/scan.tcl
+fileeval $cfPath(commands)/commands.tcl
+fileeval $cfPath(anticollider)/anticollider.tcl
+fileeval $cfPath(environment)/temperature/sct_julabo_lh45.tcl
+fileeval $cfPath(environment)/temperature/sct_qlink.tcl
+fileeval $cfPath(environment)/temperature/sct_watlow_st4.tcl
+fileeval $cfPath(environment)/temperature/sct_watlow_rm.tcl
+fileeval $cfPath(environment)/temperature/sct_rvasm2.tcl
+fileeval $cfPath(environment)/temperature/sct_oxford_itc.tcl
+fileeval $cfPath(environment)/magneticField/oxford_labview.tcl
+fileeval $cfPath(environment)/magneticField/sct_bruker_BEC1.tcl
+fileeval $cfPath(environment)/environment.tcl
+fileeval $cfPath(environment)/sct_rheometer.tcl
+fileeval $cfPath(environment)/sct_protek_common.tcl
+fileeval $cfPath(beamline)/spin_flipper.tcl
+fileeval $cfPath(commands)/pulser.tcl
+fileeval $cfPath(commands)/hvcommands.tcl
+
+source gumxml.tcl
+
+::utility::mkVar ::anticollider::protect_detector text manager protect_detector false detector true false
+::anticollider::protect_detector "true"
+
+server_init
+###########################################
+# WARNING: Do not add any code below server_init, if you do SICS may fail to initialise properly.
+
+# You can add extra-configuration code in ../extraconfig.tcl
+sicspoll intervall /instrument/detector/max_binrate 1
+sicspoll intervall /instrument/detector/total_maprate 1

site_ansto/instrument/bilby/config/INSTCFCOMMON.TXT

@@ -0,0 +1,31 @@
+config/source/source_common.tcl
+config/anticollider/anticollider_common.tcl
+config/plc/plc_common_1.tcl
+config/counter/counter_common_1.tcl
+config/hipadaba/hipadaba_configuration_common.tcl
+config/hipadaba/common_instrument_dictionary.tcl
+config/hipadaba/instdict_specification.tcl
+config/hmm/hmm_configuration_common_1.tcl
+config/hmm/hmm_object.tcl
+config/hmm/anstohm_linked.xml
+config/hmm/sct_orhvps_common.tcl
+config/scan/scan_common_1.hdd
+config/scan/scan_common_1.tcl
+config/nexus/nxscripts_common_1.tcl
+config/commands/commands_common.tcl
+config/commands/pulser.tcl
+config/commands/hvcommands.tcl
+config/motors/sct_positmotor_common.tcl
+config/environment/sct_protek_common.tcl
+config/environment/temperature/sct_julabo_lh45.tcl
+config/environment/temperature/sct_lakeshore_340.tcl
+config/environment/temperature/sct_lakeshore_336.tcl
+config/environment/temperature/sct_qlink.tcl
+config/environment/temperature/sct_watlow_st4.tcl
+config/environment/temperature/sct_rvasm2.tcl
+config/environment/temperature/sct_oxford_itc.tcl
+config/environment/magneticField/sct_bruker_BEC1.tcl
+config/environment/magneticField/sct_oxford_ips.tcl
+config/environment/magneticField/sct_oxford_labview.tcl
+
+config/motors/sct_jogmotor_common.tcl

site_ansto/instrument/bilby/config/anticollider/anticollider.tcl

@@ -0,0 +1,14 @@
+# Author: Ferdi Franceschini (ffr@ansto.gov.au)
+
+source $cfPath(anticollider)/anticollider_common.tcl 
+
+# NOTE: This is called with a list of motorname target pairs
+proc ::anticollider::enable {args} {
+  if {[SplitReply [::anticollider::protect_detector]] == "false"} {
+    return "false"
+  } else {
+    return "true"
+  }
+}
+
+::anticollider::loadscript acscript.txt

site_ansto/instrument/bilby/config/commands/commands.tcl

@@ -0,0 +1,216 @@
+source $cfPath(commands)/commands_common.tcl
+
+namespace eval motor {
+# is_homing_list = comma separated list of motors which are safe to send "home"
+    variable is_homing_list ""
+}
+
+#namespace eval sample {
+#  command select {int=0:8 sampid} {
+#    SampleNum $sampid
+#  }
+#}
+
+##
+# @brief Beamstop select command
+# @param bs beamstop, 1,2,3,4,5 or 6
+# @param bx beam position in detector coordinates
+# @param bz beam position in detector coordinates
+# Given
+# (Xbf,Zbf) = beam pos in frame coords
+# (Xbd,Zbd) = beam pos in detector coords
+# (Xbbs, Zbbs) = beam pos in beamstop coords
+# (Xdf,Zdf) = detector pos in frame coords
+# (Xbsf,Zbsf) = beamstop pos in frame coords
+# 
+# (Xbf,Zbf) = (Xdf+Xbd, Zdf+Zbd) = (Xbsf+Xbbs, Zbsf+Zbbs)
+# Origin of detector coords = frame origin
+# 
+# Detector and beamstop motor readings with beamstop disk centers
+# overlapping over detector center mark.
+# Xdf = 264.542  (7283813) Zdf = 0
+# Xbbs = 296.291 (8054270)
+# Zbbs = 259.641 (13488244)
+# Xbd = dethw, Zbd = (dethh)
+# 
+# 264.542+dethw = Xbsf+296.291
+# 0+dethh = Zbsf+259.641
+# 
+# Xbsf = -31.749 + dethw, Zbsf = -259.641 + dethh
+proc selbs {bs {bx "UNDEF"} {bz "UNDEF"}} {
+  set bsdriving false
+  set dethw [expr {[SplitReply [detector_active_height_mm]]/2.0}]
+  set dethh [expr {[SplitReply [detector_active_width_mm]]/2.0}]
+  set Xbsf [expr -31.749 + $dethw]
+  set Zbsf [expr -259.641 + $dethh]
+  array set bsl [subst {
+    1 [SplitReply [bs1 softlowerlim]]
+    2 [SplitReply [bs2 softlowerlim]]
+    3 [SplitReply [bs3 softlowerlim]]
+    4 [SplitReply [bs4 softlowerlim]]
+    5 [SplitReply [bs5 softlowerlim]]
+    6 [SplitReply [bs6 softlowerlim]]
+  }]
+  if [ catch {
+    switch $bs {
+      "1" {
+        set bsmot "bs1"
+        set bs_target 93.20
+        set bs_diameter 110
+        set bsdownCmd "drive bs2 $bsl(2) bs3 $bsl(3) bs4 $bsl(4) bs5 $bsl(5) bs6 $bsl(6)"
+      }
+      "2" {
+        set bsmot "bs2"
+        set bs_target 86.84
+        set bs_diameter 88
+        set bsdownCmd "drive bs1 $bsl(1) bs3 $bsl(3) bs4 $bsl(4) bs5 $bsl(5) bs6 $bsl(6)"
+      }
+      "3" {
+        set bsmot "bs3"
+        set bs_target 93.35
+        set bs_diameter 66
+        set bsdownCmd "drive bs2 $bsl(2) bs1 $bsl(1) bs4 $bsl(4) bs5 $bsl(5) bs6 $bsl(6)"
+      }
+      "4" {
+        set bsmot "bs4"
+        set bs_target 86.85
+        set bs_diameter 44
+        set bsdownCmd "drive bs2 $bsl(2) bs3 $bsl(3) bs1 $bsl(1) bs5 $bsl(5) bs6 $bsl(6)"
+      }
+      "5" {
+        set bsmot "bs5"
+        set bs_target 93.27
+        set bs_diameter 22
+        set bsdownCmd "drive bs2 $bsl(2) bs3 $bsl(3) bs4 $bsl(4) bs1 $bsl(1) bs6 $bsl(6)"
+      }
+      "6" {
+        set bsmot "bs6"
+        set bs_target 86.98
+        set bs_diameter 11
+        set bsdownCmd "drive bs2 $bsl(2) bs3 $bsl(3) bs4 $bsl(4) bs5 $bsl(5) bs1 $bsl(1)"
+      }
+      default {
+        error "beamstop selection must be an integer from 1 to 6"
+      }
+    }
+
+    set detoff_val [SplitReply [detoff]]
+
+    if {$bx == "UNDEF" || $bz == "UNDEF"} {
+      statemon start selbs
+      if {[info level] > 1} {statemon start [lindex [info level -1] 0]}
+      set bsdriving true
+      BeamStop -1
+      BSdiam -1
+      drive $bsmot $bs_target
+      eval $bsdownCmd
+      BeamStop $bs
+      BSdiam $bs_diameter
+      set bsdriving false
+      statemon stop selbs
+      if {[info level] > 1} {statemon stop [lindex [info level -1] 0]}
+    } else {
+      if { [string is double $bx] == false } {
+      if { [string is double $bz] == false } {
+        error "beam coordinates must be floats"
+        }
+      }
+      set bsx_target [expr {$bx-$Xbsf+$detoff_val}]
+      set bsz_target [expr {$bz-$Zbsf}]
+
+      statemon start selbs
+      if {[info level] > 1} {statemon start [lindex [info level -1] 0]}
+      set bsdriving true
+      BeamStop -1
+      BSdiam -1
+      drive $bsmot $bs_target bsx $bsx_target bsz $bsz_target
+      eval $bsdownCmd
+      BeamStop $bs
+      BSdiam $bs_diameter
+      set bsdriving false
+      statemon stop selbs
+      if {[info level] > 1} {statemon stop [lindex [info level -1] 0]}
+    }
+  } msg ] {
+    if {$bsdriving} {
+      statemon stop selbs
+      if {[info level] > 1} {statemon stop [lindex [info level -1] 0]}
+    }
+    return -code error $msg
+  }
+}
+publish selbs user
+namespace eval beamstops {
+  command selbsn {int=1,2,3,4,5,6 bs} {
+    selbs $bs "UNDEF" "UNDEF"
+  }
+  command selbsxz {int=1,2,3,4,5,6 bs float bx float bz} {
+    selbs $bs $bx $bz
+  }
+}
+
+namespace eval optics {
+	VarMake ::optics::select::section text user
+	VarMake ::optics::polarizer::in   text user
+	VarMake ::optics::lens::selection text user
+	
+  command rotary_attenuator {int=0,15,45,90,180 angle} {
+    drive att $angle
+  }
+
+  command entrance_aperture {
+    int=0,45,90,135,180,270 angle
+  } {
+    drive srce $angle
+  }
+
+# TODO Do we need this
+# command sample_aperture {
+#   int=25,50 size
+#   text=circ,squ,open,rect shape
+# } {
+#   SApXmm $size
+#   SApZmm $size
+#   SApShape $shape
+# }
+
+##############################
+##
+# @brief The "guide" command uses a lookup table to setup the collimation system
+# @param row, selects a row from the guide configuration table
+#
+# eg\n
+# guide ga 
+  command guide "
+  text=[join [array names ::optics::guide_configuration] , ] configuration
+  " {
+
+    variable guide_configuration
+    variable guide_configuration_columns
+
+    if [ catch {
+
+      foreach {compselection position} $guide_configuration($configuration) {
+        foreach el $compselection guide $guide_configuration_columns {
+          lappend to_config $guide
+          lappend to_config [set ::optics::${guide}_map($el)] 
+        }
+        ::optics::guide -set feedback status BUSY
+        set msg [eval "drive $to_config"]
+        EApPosY $position
+      }
+      GuideConfig $configuration
+    } message ] {
+      ::optics::guide -set feedback status IDLE
+      if {$::errorCode=="NONE"} {return $message}
+      return -code error $message
+    }
+    ::optics::guide -set feedback status IDLE
+  }
+  ::optics::guide -addfb text status
+  ::optics::guide -set feedback status IDLE
+}
+
+proc ::commands::isc_initialize {} {
+  ::commands::ic_initialize
+}

site_ansto/instrument/bilby/config/counter/counter.tcl

@@ -0,0 +1,32 @@
+source $cfPath(counter)/counter_common_1.tcl
+
+## TODO Put all the counter macros in the counter namespace
+namespace eval counter {
+  variable isc_numchannels
+  variable isc_monitor_address
+  variable isc_portlist
+  variable isc_beam_monitor_list 
+  proc set_sobj_attributes {} {
+  }
+}
+
+proc ::counter::isc_initialize {} {
+  if [catch {
+    variable isc_numchannels
+    variable isc_monitor_address
+    variable isc_portlist
+
+    dict for {k v} $::MONITOR_HOSTPORT {
+      lappend monlist $k
+      lappend hostlist [dict get $v HOST]
+      lappend isc_portlist [dict get $v PORT]
+    }
+    variable isc_beam_monitor_list $monlist
+    set isc_monitor_address [lindex $hostlist 0]
+    set isc_numchannels [llength $isc_beam_monitor_list]
+    ::counter::ic_initialize
+  } message ] {
+    if {$::errorCode=="NONE"} {return $message}
+    return -code error "$message"
+  }
+}

site_ansto/instrument/bilby/config/hipadaba/hipadaba_configuration.tcl

@@ -0,0 +1 @@
+source $cfPath(hipadaba)/hipadaba_configuration_common.tcl

site_ansto/instrument/bilby/config/hmm/hmm_configuration.tcl

@@ -0,0 +1,70 @@
+
+fileeval $cfPath(hmm)/hmm_configuration_common_1.tcl
+set sim_mode [SplitReply [hmm_simulation]]
+
+proc ::histogram_memory::init_OAT_TABLE {} {
+  if [ catch {
+  # We don't need a MAX_CHAN parameter for time because the time channel 
+  # is scaled by calling the ::histogram_memory::clock_scale function
+    OAT_TABLE X -setdata MAX_CHAN 192
+    OAT_TABLE Y -setdata MAX_CHAN 192
+    OAT_TABLE X -setdata BMIN -0.5
+    OAT_TABLE X -setdata BMAX  191.5
+    OAT_TABLE Y -setdata BMIN -0.5
+    OAT_TABLE Y -setdata BMAX  191.5
+
+    set clock_scale 1000
+    set freq 50
+    hmm configure fat_clock_scale $clock_scale
+    hmm configure fat_frame_frequency $freq
+    hmm configure fat_frame_source INTERNAL
+
+    OAT_TABLE -set X { 191.5 190.5 } NXC 192 Y { -0.5 0.5 } NYC 192 T { 0 20000 } NTC 1 
+  } message ] {
+    return -code error $message
+  }
+}
+proc ::histogram_memory::pre_count {} {}
+proc ::histogram_memory::post_count {} {}
+proc ::histogram_memory::isc_initialize {} {
+  # Instrument specific X and Y dimension names
+  variable INST_NXC "oat_nxc_eff"
+  variable INST_NYC "oat_nyc_eff"
+
+  if [ catch {
+    ::histogram_memory::init_hmm_objs
+    if {$::sim_mode == "true"} {
+        hmm configure oat_ntc_eff 1
+        hmm configure $INST_NYC 127
+        hmm configure $INST_NXC 127
+    }
+    BAT_TABLE -init
+    CAT_TABLE -init
+    SAT_TABLE -init
+    OAT_TABLE -init
+    FAT_TABLE -init
+    ::histogram_memory::ic_initialize
+
+    detector_active_height_mm [expr 5.08 * 192]
+    detector_active_width_mm  [expr 5.08 * 192]
+    detector_active_height_mm lock
+    detector_active_width_mm  lock
+
+  # hmm configure FAT_SIMULATED_EVENT_Y0 $y_bb0
+  # hmm configure FAT_SIMULATED_EVENT_Y1 $ybbmax
+  # hmm configure FAT_SIMULATED_EVENT_X0 $x_bb0
+  # hmm configure FAT_SIMULATED_EVENT_X1 $xbbmax
+    ::histogram_memory::init_OAT_TABLE
+    ::histogram_memory::upload_config Filler_defaults
+
+    set ::histogram_memory::histmem_axes(HOR) /instrument/detector/x_pixel_offset
+    set ::histogram_memory::histmem_axes(VER) /instrument/detector/y_pixel_offset
+  } message ] {
+    return -code error $message
+  }
+}
+
+proc histmem {cmd args} {
+  eval "_histmem $cmd $args"
+}
+publish histmem user

site_ansto/instrument/bilby/config/nexus/nxscripts.tcl

@@ -0,0 +1,4 @@
+source $cfPath(nexus)/nxscripts_common_1.tcl
+proc ::nexus::isc_initialize {} {
+  ::nexus::ic_initialize
+}

site_ansto/instrument/bilby/config/optics/README.TXT

@@ -0,0 +1 @@
+Optical Components: Neutron Guides, Apertures, Polariser, Focussing Lenses and Prisms

site_ansto/instrument/bilby/config/optics/aperture_configuration.tcl

@@ -0,0 +1,94 @@
+namespace eval optics {
+  array set AttRotLookupTable {
+    0    { 0.0  1           } 
+    30   { 1.3  0.498782    } 
+    60   { 3.3  0.176433    } 
+    90   { 4.9  0.0761367   } 
+    120  { 6.4  0.0353985   } 
+    150  { 8.3  0.0137137   } 
+    180  { 9.6  0.00614167  } 
+    210  {11.2  0.00264554  } 
+    240  {13.1  0.000994504 } 
+    270  {15.0  0.000358897 } 
+    300  {18.0  7.2845e-05  } 
+    330  {25.0  1.67827e-06 } 
+  }
+
+  array set EApLookupTable {
+    0   { 5    circ}
+    30  {10    circ}
+    60  {20    circ}
+    90  {30    circ}
+    120 {40    circ}
+    150 {50    circ}
+    180 {50    squ }
+    210 {open  open}
+    240 {open  open}
+    270 {open  open}
+    300 {open  open}
+    330 {open  open}
+  }
+}
+
+proc ::optics::AttRotLookup {angle column tol} {
+	variable AttRotLookupTable
+
+  set catch_status [ catch {
+    set foundit false
+    foreach vangle [array names AttRotLookupTable] {
+      if {$vangle >= [expr {$angle-$tol}] && $vangle <= [expr {$angle+$tol}]} {
+        set foundit true
+        break
+      }
+    }
+    if {$foundit == true} {
+    switch $column {
+      "plex"      { set index 0 }
+      "attfactor" { set index 1 }
+      default     { error "$column is unknown, allowed values are plex or attfactor" }
+    }
+      return [lindex $AttRotLookupTable($vangle) $index]
+    } else {
+      return -1
+    }
+  } message ]
+  handle_exception $catch_status $message
+}
+
+proc ::optics::EApLookUp {angle param tol} {
+	variable EApLookupTable
+
+	set foundit false
+	if [ catch {
+  if {$param == "size"} {
+    set cgf [SplitReply [GuideConfig]]
+    if {[string first $cgf "g1 g2 g3 g4 g5 g6 g7 g8 g9 p1 p2 p3 p4 p5 p6 p7 p8 p9"] != -1} {
+      return 50
+    }
+  }
+	switch $param {
+		"size" {set index 0}
+		"shape" {set index 1}
+		 default {
+			error "ERROR: Invalid lookup parameter $param"
+		 }
+	}
+	foreach vangle [array names EApLookupTable] {
+		if {$vangle >= [expr {$angle-$tol}] && $vangle <= [expr {$angle+$tol}]} {
+			set foundit true
+			break
+		}
+	}
+	if {$foundit == true} {
+		return [lindex $EApLookupTable($vangle) $index]
+  } else {
+		switch $param {
+			"size" {return 0}
+			"shape" {return "UNKNOWN"}
+    }
+	}
+  } message ] {
+		if {$::errorCode == "NONE"} {return $message}
+		return -code error "$message"
+  }
+}

site_ansto/instrument/bilby/config/optics/guide_configuration.tcl

@@ -0,0 +1,66 @@
+##
+# @file 
+# A guide configuration table where each line describes the setup
+# for a mode of operation.
+# The table will have a corresponding interpretation list which provides
+# commands to setup the instrument.
+
+namespace eval optics {
+##
+# @brief These arrays map the component identifiers (G, MT, etc) to the 
+# position index for each guide motor (c1, c2 ... c9)
+  array set c1_map {G 1 MT 2 P 3}
+  array set c2_map {MT 1 G 2 A 3}
+  array set c3_map {MT 1 G 2 A 3}
+  array set c4_map {MT 1 G 2 A 3}
+  array set c5_map {MT 1 G 2 A 3}
+  array set c6_map {MT 1 G 2 A 3}
+  array set c7_map {MT 1 G 2 A 3}
+  array set c8_map {MT 1 G 2 A 3}
+  array set c9_map {L  1 MT 2 G 3 A 4 LP 5}
+
+# The guide configuration table is indexed by a configuration
+# identifier (ga, mt, lp, etc). Each row has two elements, 
+# 1. A list of components selected for each guide (MT A ... etc)
+# 2. The entrance aperature position in mm
+# Eg $guide_configuration(p2) returns the following list
+# {{P  G  A  A  A  A  A  A  A } 6934} 
+array set guide_configuration {
+  ga         {{MT A  A  A  A  A  A  A  A } 675} 
+  mt         {{MT MT MT MT MT MT MT MT MT} 675}
+  lp         {{MT MT MT MT MT MT MT MT LP} 675} 
+  lens       {{MT A  A  A  A  A  A  A  L } 675} 
+  p1         {{P  A  MT MT MT MT MT MT MT} 4621} 
+  p1lp       {{P  A  MT MT MT MT MT MT LP} 4621} 
+  p1lens     {{P  A  MT MT MT MT MT MT L } 4621} 
+  g1         {{G  A  A  A  A  A  A  A  A } 4929} 
+  p2         {{P  G  A  A  A  A  A  A  A } 6934} 
+  g2         {{G  G  A  A  A  A  A  A  A } 6934} 
+  p3         {{P  G  G  A  A  A  A  A  A } 8949} 
+  g3         {{G  G  G  A  A  A  A  A  A } 8949} 
+  p4         {{P  G  G  G  A  A  A  A  A } 10955} 
+  g4         {{G  G  G  G  A  A  A  A  A } 10955} 
+  p5         {{P  G  G  G  G  A  A  A  A } 12943} 
+  g5         {{G  G  G  G  G  A  A  A  A } 12943} 
+  p6         {{P  G  G  G  G  G  A  A  A } 14970} 
+  g6         {{G  G  G  G  G  G  A  A  A } 14970} 
+  p7         {{P  G  G  G  G  G  G  A  A } 16971} 
+  g7         {{G  G  G  G  G  G  G  A  A } 16971} 
+  p8         {{P  G  G  G  G  G  G  G  A } 18937} 
+  g8         {{G  G  G  G  G  G  G  G  A } 18937} 
+  p9         {{P  G  G  G  G  G  G  G  G } 19925} 
+  g9         {{G  G  G  G  G  G  G  G  G } 19925} 
+}
+
+# This list maps the motor names to columns of the
+# guide_configuration table.
+set guide_configuration_columns {
+              c1 c2 c3 c4 c5 c6 c7 c8 c9
+} 
+
+}
+
+namespace eval optics {
+  variable guide_configuration
+  variable guide_configuration_columns
+}

site_ansto/instrument/bilby/config/optics/optics.tcl

@@ -0,0 +1,2 @@
+fileeval $cfPath(optics)/guide_configuration.tcl
+fileeval $cfPath(optics)/aperture_configuration.tcl

site_ansto/instrument/bilby/config/scan/scan.tcl

@@ -0,0 +1,6 @@
+source $cfPath(scan)/scan_common_1.tcl
+proc ::scan::pre_hmm_scan_prepare {} {}
+
+proc ::scan::isc_initialize {} {
+  ::scan::ic_initialize
+}

site_ansto/instrument/bilby/config/source/source.tcl

@@ -0,0 +1,6 @@
+source $cfPath(source)/source_common.tcl
+
+proc ::source::isc_initialize {} {
+  ::source::ic_initialize "cold"
+}
+

site_ansto/instrument/bilby/hostport_config.tcl

@@ -0,0 +1,48 @@
+# MOTOR HOST AND PORT
+foreach {mc host port} {
+  MC1 mc1-bilby pmc1-bilby
+  MC2 mc2-bilby pmc2-bilby
+  MC3 mc3-bilby pmc3-bilby
+  MC4 mc4-bilby pmc4-bilby
+} {
+  dict set MOTOR_HOSTPORT $mc HOST $host
+  dict set MOTOR_HOSTPORT $mc PORT $port
+}
+
+# BEAM MONITOR HOST AND PORT
+foreach {bm host port} {
+  MONITOR_1 das1-bilby 30000
+  MONITOR_2 das1-bilby 30001
+  MONITOR_3 das1-bilby 30002
+} {
+  dict set MONITOR_HOSTPORT $bm HOST $host
+  dict set MONITOR_HOSTPORT $bm PORT $port
+}
+
+# HISTOGRAM SERVER HOST AND PORT
+foreach {key host port} {
+  HMM das1-bilby.nbi.ansto.gov.au 8080
+  HMSTAT das1-bilby.nbi.ansto.gov.au 8081
+  ORDELA 137.157.202.71 4001
+  NHQ200 ca1-bilby 4002
+} {
+  dict set HISTMEM_HOSTPORT $key HOST $host
+  dict set HISTMEM_HOSTPORT $key PORT $port
+}
+
+# SPIN FLIPPER HOST AND PORT
+foreach {key host port} {
+  ANSFR83B 137.157.202.71 4002
+} {
+  dict set ACGEN_HOSTPORT $key HOST $host
+  dict set ACGEN_HOSTPORT $key PORT $port
+}
+
+# VELOCITY SELECTOR HOST AND PORT
+foreach {key host port} {
+  NVS40 137.157.202.73 10000
+  NVS43 137.157.202.74 10000
+} {
+  dict set VELSEL_HOSTPORT $key HOST $host
+  dict set VELSEL_HOSTPORT $key PORT $port
+}

site_ansto/instrument/bilby/hostport_config_test.tcl

@@ -0,0 +1,50 @@
+# Specify NONE for HOST and PORT if there is no fake device to talk to.
+
+# TEST MOTOR HOST AND PORT
+foreach {key host port} {
+  MC1 localhost 63030
+  MC2 localhost 63031
+  MC3 localhost 63032
+  MC4 localhost 63033
+} {
+  dict set MOTOR_HOSTPORT $key HOST $host
+  dict set MOTOR_HOSTPORT $key PORT $port
+}
+
+# TEST BEAM MONITOR HOST AND PORT
+foreach {key host port} {
+  MONITOR_1 localhost 30000
+  MONITOR_2 localhost 30001
+  MONITOR_3 localhost 30002
+} {
+  dict set MONITOR_HOSTPORT $key HOST $host
+  dict set MONITOR_HOSTPORT $key PORT $port
+}
+
+# TEST HISTOGRAM SERVER HOST AND PORT
+foreach {key host port} {
+  HMM das1-test.nbi.ansto.gov.au 8080
+  HMSTAT das1-test.nbi.ansto.gov.au 8081
+  ORDELA localhost 4001
+  NHQ200 localhost 4002
+} {
+  dict set HISTMEM_HOSTPORT $key HOST $host
+  dict set HISTMEM_HOSTPORT $key PORT $port
+}
+
+# SPIN FLIPPER HOST AND PORT
+foreach {key host port} {
+  ANSFR83B localhost 64001
+} {
+  dict set ACGEN_HOSTPORT $key HOST $host
+  dict set ACGEN_HOSTPORT $key PORT $port
+}
+
+# VELOCITY SELECTOR HOST AND PORT
+foreach {key host port} {
+  NVS40 localhost 10000
+  NVS43 localhost 10000
+} {
+  dict set VELSEL_HOSTPORT $key HOST $host
+  dict set VELSEL_HOSTPORT $key PORT $port
+}

site_ansto/instrument/bilby/runsics_def.py

@@ -0,0 +1,3 @@
+inst_user = 'bilby_sics'
+inst_name = 'bilby'
+inst_config = 'bilby_configuration.tcl'

site_ansto/instrument/config/hmm/hmm_configuration_common_1.tcl

@@ -67,19 +67,21 @@ namespace eval histogram_memory {
 
   # Frame source for each instrument if freq = 0, this can happen when automatically
   # setting frequencies from choppers.
-        array set default_frame_source_when_there_is_no_frame_signal {
+      array set default_frame_source_when_there_is_no_frame_signal {
-          echidna INTERNAL
+        echidna INTERNAL
-            koala INTERNAL
+        koala INTERNAL
-            kowari EXTERNAL
+        kowari EXTERNAL
-            pelican INTERNAL
+        pelican INTERNAL
-            platypus EXTERNAL
+        platypus EXTERNAL
-            quokka INTERNAL
+        quokka INTERNAL
-            taipan INTERNAL
+        taipan INTERNAL
-            wombat INTERNAL
+        wombat INTERNAL
-            lyrebird INTERNAL
+        lyrebird INTERNAL
-            kookaburra INTERNAL
+        kookaburra INTERNAL
-            dingo INTERNAL
+        dingo INTERNAL
-        }
+        bilby INTERNAL
+        emu   INTERNAL
+      }
 
       array set default_frame_source_always_internal {
         echidna "true"
@@ -93,6 +95,8 @@ namespace eval histogram_memory {
         lyrebird "false"
         kookaburra "false"
         dingo "false"
+        bilby "false"
+        emu   "false"
       }
 
       ::utility::mkVar detector_active_height_mm Float user active_height true detector true true

site_ansto/instrument/config/nexus/nxscripts_common_1.tcl

@@ -54,6 +54,8 @@ namespace eval nexus {
     "taipan"   "simple"
     "kookaburra"  "simple"
     "dingo" "simple"
+    "bilby" "simple"
+    "emu" "simple"
   }
 }
 namespace eval ::nexus::histmem {}
@@ -120,7 +122,7 @@ proc ::nexus::datapath {} {
 # @param postfix This is the filename suffix, must be one of: nx.hdf, hdf, h5, nx5, xml
 proc newFileName {idNum postfix} {
   if [ catch {
-    array set inst_mnem {quokka QKK wombat WBT echidna ECH kowari KWR koala KOL taipan TPN platypus PLP pelican PLN lyrebird LBD kookaburra KKB dingo DNG}
+    array set inst_mnem {quokka QKK wombat WBT echidna ECH kowari KWR koala KOL taipan TPN platypus PLP pelican PLN lyrebird LBD kookaburra KKB dingo DNG bilby BBY emu EMU}
   #  set prefix [SplitReply [sicsdataprefix]]
     set date_time_arr [split [sicstime] " "]
     set isodate [lindex $date_time_arr 0]

site_ansto/instrument/deploySICS.sh

@@ -152,6 +152,14 @@ dingo|dingo)
 INSTRUMENT=dingo
 DESTHOST=${2:-ics1-dingo.nbi.ansto.gov.au}
 INSTSRC=$SRCDIR/dingo;;
+bilby|bilby)
+INSTRUMENT=bilby
+DESTHOST=${2:-ics1-bilby.nbi.ansto.gov.au}
+INSTSRC=$SRCDIR/bilby;;
+emu|emu)
+INSTRUMENT=emu
+DESTHOST=${2:-ics1-emu.nbi.ansto.gov.au}
+INSTSRC=$SRCDIR/emu;;
 esac
 INSTCFDIR=$INSTSRC/config
 

site_ansto/instrument/util/utility.tcl

@@ -197,7 +197,7 @@ sicslist setatt $setpoint_script mutable true
 
 ## TODO put all the utility macros in the utility namespace
 namespace eval utility {
-  variable instrument_names [list echidna wombat kowari quokka platypus pelican taipan lyrebird kookaburra]
+  variable instrument_names [list bilby dingo echidna emu kookaburra kowari lyrebird pelican platypus quokka taipan wombat]
   variable sics_port
   set base_port 60000
   set currbase $base_port