- Added a couple of forgotten files

ecbdriv.h

@@ -0,0 +1,45 @@
+/*------------------------------------------------------------------------
+  this is a motor driver for the Risoe motor controllers within the
+  ECB system. The motor is controlled through functions invoked in the
+  Z80 processor of the ECB system which is connected through a GPIB
+  bus to the wider world. This driver has to do a lot of extra things:
+  - it has to convert from physical values to motor steps.
+  - Quite a few parameters, such as ramping parameters,
+    have to be downloaded to the ECB
+  - Risoe motors may have a virtual encoder or a real encoder. 
+  - The motor may have to control air cushions as well.
+  - Tricky backlash handling. Backlash handling ensures that a position is
+    always arrived at from a defined direction. If backlash is applied
+    a restart flag is set in ECBRunTo. ECBGetStatus checks for that and
+    causes the motor to drive back to the position actually desired. 
+
+  This driver support only P2048a motor controllers, as these are the
+  only ones which seem to have arrived at PSI. The P1648 and Tridynamic 
+  things are not supported. 
+
+  Multiplexed motors: Originally the ECB supported 24 motors. This did 
+  prove to be not enough. Therefore another device called P2234e was 
+  introduced which allowed to run 8 motors from one controller port. In this 
+  case the motor parameters have to be copied to the ECB before 
+  driving the motor. Multiplexing is selected through the parameter MULT.
+  MULT 0 means no multiplexing, MULT > 0 makes MULT the number of the 
+  motor in the multiplexer. MULT is now also used to flag a download of
+  parameters to the ECB. In such a case  MULT is -1. 
+ 
+
+  Some of this code was taken from the tascom driver for the ECB.
+
+  copyright: see file COPYRIGHT
+
+  Mark Koennecke, January 2003
+  
+--------------------------------------------------------------------------*/
+#ifndef ECBDRIV
+#define ECBDRIV
+
+MotorDriver *CreateECBMotor(SConnection *pCon, int argc, char *argv[]);
+void        KillECBMotor(void *driver);
+
+#endif
+
+ 

nxsupport.tcl

@@ -0,0 +1,54 @@
+#===========================================================================
+# Support routines for scripting NeXus files with nxscript.
+#
+# Mark Koennecke, February 2003
+#==========================================================================
+proc makeFileName args {
+    sicsdatanumber incr
+    set num [SplitReply [sicsdatanumber]]
+    set p [string trim [SplitReply [sicsdatapath]]]
+    set pre [string trim [SplitReply [sicsdataprefix]]]
+    set po [string trim [SplitReply [sicsdatapostfix]]]
+    return [format "%s%s%5.5d2003%s" $p $pre $num $po] 
+}
+#==========================================================================
+proc writeFloatVar {alias var} {
+    set ret [catch {set val [SplitReply [$var]]} val]
+    if { $ret != 0} {
+	clientput [format "ERROR: failed to read %s, %s" $var $val]
+	return
+    } else {
+	nxscript putfloat $alias [expr $val * 1.0 ]
+    }
+}
+#=========================================================================
+proc writeTextVar {alias var} {
+    set ret [catch {set val [SplitReply [$var]]} val]
+    if { $ret != 0} {
+	clientput [format "ERROR: failed to read %s" $var]
+	return
+    } else {
+	nxscript puttext $alias $val
+    }
+}
+#========================================================================
+proc writeTextAttribute {attName var} {
+    set ret [catch {set val [SplitReply [$var]]} val]
+    if { $ret != 0} {
+	clientput [format "ERROR: failed to read %s" $var]
+	return
+    } else {
+	nxscript putglobal $attName $val
+    }
+}
+#=======================================================================
+proc writeStandardAttributes {fileName} {
+    nxscript putglobal file_name $fileName
+    nxscript putglobal file_time [sicstime]
+    writeTextAttribute instrument instrument
+    writeTextAttribute owner user
+    writeTextAttribute owner_telephone_number phone
+    writeTextAttribute owner_fax_number fax
+    writeTextAttribute owner_email email
+    writeTextAttribute owner_address adress
+}