- Initial versions of AMOR and triple axis manuals

doc/user/amor2t.htm

@@ -16,7 +16,8 @@ movement.  As such this object has no real user interface except the
 usual printing of the position when the name of the virtual motor is
 typed. However, in order to do his work this virtual motor needs a lot
 of parameters. These are described below. It is assumed that the
-virtual motors name is a2t. 
+virtual motors name is s2t. There is another virtual motor called
+aom2t which is the analyzer two theta angle.  
 
 </P>
 <p>
@@ -39,20 +40,31 @@ height of the table itself.
 <DD>The base height of diaphragm 5.
 <DT>interrupt
 <DD> The interrupt to issue if this motor fails to operate.
+<DT>anah 
+<DD>Height of the analyzer.
+<DT>anad
+<DD>distance analyser - sample.
+<dt>anaflag 
+<dd>Flag if analyzer movement should be calculated or not. -1 if not,
+positive if yes.  
+<dt>c2h
+<dd>height constant for single detector 2.
+<dt>aomconst
+<dd>constant part of analyzer omega angle. 
 </dl>
 The values of parameters can be inquired by typing:
 <pre>
-a2t parname
+s2t parname
 </pre>
 and set by:
 <pre>
-a2t parname newval
+s2t parname newval
 </pre>
 For example:
 <pre>
-a2t detectord
+s2t detectord
 155.
-a2t detectord 300.
+s2t detectord 300.
 </pre>
 </p>