From d8117b6b8b69addd7da65021e65cbf7834fe9aff Mon Sep 17 00:00:00 2001
From: Ferdi Franceschini <ffr@ansto.gov.au>
Date: Thu, 4 Oct 2007 08:33:28 +1000
Subject: [PATCH] histogram_memory::setmode is obsolete. So it's gone.

r2175 | ffr | 2007-10-04 08:33:28 +1000 (Thu, 04 Oct 2007) | 3 lines
---
 .../sans/config/hmm/hmm_configuration.tcl     | 58 -------------------
 .../instrument/sans/quokka_configuration.tcl  |  7 +--
 2 files changed, 2 insertions(+), 63 deletions(-)

diff --git a/site_ansto/instrument/sans/config/hmm/hmm_configuration.tcl b/site_ansto/instrument/sans/config/hmm/hmm_configuration.tcl
index 55d5d229..41d56419 100644
--- a/site_ansto/instrument/sans/config/hmm/hmm_configuration.tcl
+++ b/site_ansto/instrument/sans/config/hmm/hmm_configuration.tcl
@@ -37,64 +37,6 @@ if {$sim_mode == "true"} {
     hmm configure hmDataPath ../HMData;
   }
 }
-# Configure to upload a complete configuration to the histogram server.
-# In this case it's the main config file plus the FAT, BAT and OAT files
-# in the same direcory as the SICS executable (for this example).
-# Alternatives:
-# - A partial config could be uploaded instead - e.g. just the main config file,
-# in that case the main config file points to a set of FAT, BAT OAT files
-# located on the server.
-# - The histogram server could configure itself from a config file set
-# kept on the local file system (not automated presently, manual control only)
-# - Or, no configuration at all could be uploaded, the
-# histogram server can configure itself using its default config files.
-proc ::histogram_memory::setmode {mode} {
-  hmm_mode $mode;
-  set sim_mode [SplitReply [hmm_simulation]];
-
-  switch $mode {
-    pulser {
-      if {$sim_mode == "true"} {
-        hmm configure oat_nyc_eff 1024;
-        hmm configure oat_nxc_eff 64;
-        hmm configure oat_ntc_eff 1;
-      }
-      _hmm_hor_channel_name tube_pair_number
-      _hmm_hor_axis tube_pair_number
-      _hmm_hor_axis_alias dcolindex
-      _hmm_vert_axis vertical_channel_number
-      _hmm_vert_axis_alias drowindex
-      hmm configure hmconfigscript "returnconfigfile [SplitReply [hmm_user_configpath]]/anstohm_full_MESYTEC_PULSER.xml"
-    }
-    calibration {
-      if {$sim_mode == "true"} {
-        hmm configure oat_nyc_eff 1024;
-        hmm configure oat_nxc_eff 64;
-        hmm configure oat_ntc_eff 1;
-      }
-      _hmm_hor_channel_name tube_pair_number
-      _hmm_hor_axis tube_pair_number
-      _hmm_hor_axis_alias dcolindex
-      _hmm_vert_axis vertical_channel_number
-      _hmm_vert_axis_alias drowindex
-      hmm configure hmconfigscript "returnconfigfile [SplitReply [hmm_user_configpath]]/anstohm_full_nofolding.xml"
-    }
-    normal -
-      default {
-        if {$sim_mode == "true"} {
-          hmm configure oat_nyc_eff 512;
-          hmm configure oat_nxc_eff 128;
-          hmm configure oat_ntc_eff 1;
-        }
-        _hmm_hor_channel_name horizontal_channel_number
-        _hmm_hor_axis polar_angle
-        _hmm_hor_axis_alias dtheta
-        _hmm_vert_axis vertical_channel_number
-        _hmm_vert_axis_alias drowindex
-        ::histogram_memory::configure_server Filler_defaults
-      }
-  }
-}
 
 proc ::histogram_memory::initialize {} {
   ::histogram_memory::_initialize
diff --git a/site_ansto/instrument/sans/quokka_configuration.tcl b/site_ansto/instrument/sans/quokka_configuration.tcl
index b66eaad4..a6b6c3ec 100644
--- a/site_ansto/instrument/sans/quokka_configuration.tcl
+++ b/site_ansto/instrument/sans/quokka_configuration.tcl
@@ -1,5 +1,5 @@
-# $Revision: 1.4 $
-# $Date: 2007-08-20 22:54:45 $
+# $Revision: 1.5 $
+# $Date: 2007-10-03 22:33:28 $
 # Author: Ferdi Franceschini (ffr@ansto.gov.au)
 # Last revision by: $Author: ffr $
 
@@ -34,9 +34,6 @@ fileeval $cfPath(scan)/scan.tcl
 source $cfPath(hipadaba)/hipadaba_configuration.tcl
 source gumxml.tcl
 
-#::histogram_memory::setmode pulser
-#::histogram_memory::setmode calibration
-::histogram_memory::setmode normal
 ::histogram_memory::initialize
 
 MakeStateMon hmscan