move file sct_hv.tcl to ./hmm
r3555 | jgn | 2012-05-30 11:52:58 +1000 (Wed, 30 May 2012) | 1 line
This commit is contained in:
Jing Chen
committed by
Douglas Clowes
Douglas Clowes
parent
915ab1a0a2
commit
d3390e278d
@@ -1,314 +0,0 @@
|
||||
###########################################################################################################################
|
||||
# @file Proptocols between SICS and High Voltage Controller
|
||||
#
|
||||
# This is a driver for SICS to make following communication with the High Voltage Controller
|
||||
#
|
||||
#
|
||||
# 1. SICS uses TCP/IP protocol to interact with the HV component who shall provide an IP address
|
||||
# together with an port number.
|
||||
#
|
||||
# 2. Commands From SICS to HV component,
|
||||
# 1. HV_START hv1=xxx, i1=xxx, hv2=xxx, i2=xxx
|
||||
# :: Responses from HV component back to SICS are either
|
||||
# OK (if the system start correctly), or
|
||||
# Error Message (if the system does not start normally, the error message shall indicate
|
||||
# type of the errors)
|
||||
#
|
||||
# 2. HV_STOP (This will stop/shutdown the HV component totally)
|
||||
#
|
||||
# 3. HV_RESET (This will reset the HV component using the hv/i values specified in the Gumtree client GUI)
|
||||
# :: Responses from HV component back to SICS are either
|
||||
# OK (if the system start correctly), or
|
||||
# Error Message (if the system does not start normally, the error message will indicate type of the errors)
|
||||
#
|
||||
# 4. HV_STATUS (This command will send to HV component automatically and regularly, i.e. every 1 sec)
|
||||
# :: Responses from HV component back to SICS is "hv1=xxx, i1=xxx, hv2=xxx, i2=xxx, system=rampingup;\n",
|
||||
# SICS uses this information to update their values in the SICS system and on the Gumtree client as well.
|
||||
#
|
||||
# 3. HV parameters to be dsiaplyed on the Gumtree GUI are, hv1, i1, hv2, i2, system
|
||||
#
|
||||
# Author: Jing Chen (jgn@ansto.gov.au) July 2011
|
||||
#
|
||||
# The HV Controller can be installed with the following command,
|
||||
# ::scobj::hv::mkHV {
|
||||
# name "hv"
|
||||
# IP localhost
|
||||
# PORT 55010
|
||||
# tuning 1
|
||||
# interval 1
|
||||
#
|
||||
##############################################################################################################################
|
||||
|
||||
|
||||
proc debug_log {args} {
|
||||
set d1 [clock format [clock seconds] -format %d%h%Y]
|
||||
set fd [open "../log/pressure$d1.log" a]
|
||||
puts $fd "[clock format [clock seconds] -format "%D %T "] [string trim $args "{}"]"
|
||||
close $fd
|
||||
}
|
||||
|
||||
|
||||
namespace eval ::scobj::hv {
|
||||
}
|
||||
|
||||
proc ::scobj::hv:setting {field} {
|
||||
|
||||
set newPara [sct target]
|
||||
|
||||
switch $field {
|
||||
"voltage" {set comm "set hv=$newPara\r\n"}
|
||||
"pressure" {set comm "set pressure=$newPara\r\n"}
|
||||
"mode" {set comm "set mode=$newPara\r\n"}
|
||||
"date" {set comm "set date=$newPara\r\n"}
|
||||
default {error "ERROR: illegal input command, type help for more info"
|
||||
return idle
|
||||
}
|
||||
}
|
||||
|
||||
sct send $comm
|
||||
return checkReply
|
||||
}
|
||||
|
||||
proc ::scobj::hv::checkReplyFunc {basePath} {
|
||||
set replyStr [sct result]
|
||||
|
||||
hset $basePath/msg $replyStr
|
||||
return idle
|
||||
}
|
||||
|
||||
##
|
||||
|
||||
# @brief send "get status" command to the HV device and obtain the latest status of the device
|
||||
proc ::scobj::hv::getHVStatusFunc {mode} {
|
||||
switch $mode {
|
||||
"state" {set comm "get status\r\n"}
|
||||
"config" {set comm "get config\r\n"}
|
||||
default {error "ERROR: illegal input command, type help for more info"
|
||||
return idle
|
||||
}
|
||||
}
|
||||
|
||||
sct send $comm
|
||||
#after 500
|
||||
return rdHVStatus
|
||||
}
|
||||
|
||||
##
|
||||
# @brief Read and record the HV status from the HV device
|
||||
proc ::scobj::hv::rdHVStatusFunc {basePath mode} {
|
||||
set replyStr [sct result]
|
||||
hset $basePath/msg $replyStr
|
||||
#broadcast "Reply from get $mode: $replyStr"
|
||||
if {[string first "Error" $replyStr] != -1} {
|
||||
error "ERROR: cannot get the current parameters setting from the HV device, check again!"
|
||||
} else {
|
||||
set replyText [split [string trimright $replyStr "\r\n "] ","]
|
||||
|
||||
if {$mode == "state"} {
|
||||
hset $basePath/status/state "[lindex $replyText 3] [lindex $replyText 4]"
|
||||
hset $basePath/status/voltage "[lindex $replyText 5] [lindex $replyText 6]"
|
||||
hset $basePath/status/current "[lindex $replyText 7] [lindex $replyText 8]"
|
||||
hset $basePath/status/pressure1 "[lindex $replyText 10] [lindex $replyText 11]"
|
||||
hset $basePath/status/pressure2 "[lindex $replyText 13] [lindex $replyText 14]"
|
||||
hset $basePath/status/pressure3 "[lindex $replyText 16] [lindex $replyText 17]"
|
||||
hset $basePath/status/pressure4 "[lindex $replyText 19] [lindex $replyText 20]"
|
||||
hset $basePath/status/pressure5 "[lindex $replyText 22] [lindex $replyText 23]"
|
||||
hset $basePath/status/pressure6 "[lindex $replyText 25] [lindex $replyText 26]"
|
||||
hset $basePath/status/PLC-S "[lindex $replyText 28]"
|
||||
hset $basePath/status/PLC-H "[lindex $replyText 30]"
|
||||
hset $basePath/status/Presr-S "[lindex $replyText 32]"
|
||||
hset $basePath/status/Presr-H "[lindex $replyText 34]"
|
||||
hset $basePath/status/Soft-S "[lindex $replyText 36]"
|
||||
hset $basePath/status/Hard-S "[lindex $replyText 38]"
|
||||
|
||||
set logdata "[lindex $replyText 10] [lindex $replyText 13] [lindex $replyText 16] [lindex $replyText 19] [lindex $replyText 22] [lindex $replyText 25]"
|
||||
debug_log $logdata
|
||||
|
||||
} elseif {$mode == "config"} {
|
||||
hset $basePath/config/mode "[lindex $replyText 3] [lindex $replyText 4]"
|
||||
hset $basePath/config/hv "[lindex $replyText 5]"
|
||||
hset $basePath/config/pressure_threshold "[lindex $replyText 6] [lindex $replyText 7]"
|
||||
} else {
|
||||
return idle
|
||||
}
|
||||
|
||||
sct utime readtime
|
||||
}
|
||||
|
||||
return idle
|
||||
}
|
||||
|
||||
|
||||
##
|
||||
# @brief Make a HV Controller
|
||||
#
|
||||
# @param argList, {name "hv" IP localhost PORT 65123 tuning 1 interval 1}
|
||||
#
|
||||
# name: name of hv controller object
|
||||
# IP: IP address of RF generator moxa box
|
||||
# PORT: Port number assigned to the generator on the moxa-box
|
||||
# tuning: boolean, set tuning=1 to allow instrument scientists to set the axe positions
|
||||
# interval: polling and ramping interval in seconds.
|
||||
|
||||
proc ::scobj::hv::mkHV {argList} {
|
||||
# Generate parameter array from the argument list
|
||||
foreach {k v} $argList {
|
||||
set KEY [string toupper $k]
|
||||
set pa($KEY) $v
|
||||
}
|
||||
|
||||
MakeSICSObj $pa(NAME) SCT_OBJECT
|
||||
sicslist setatt $pa(NAME) klass instrument
|
||||
sicslist setatt $pa(NAME) long_name $pa(NAME)
|
||||
|
||||
hfactory /sics/$pa(NAME)/msg plain user text
|
||||
|
||||
hfactory /sics/$pa(NAME)/status plain user none
|
||||
hfactory /sics/$pa(NAME)/status/voltage plain user text
|
||||
hfactory /sics/$pa(NAME)/status/current plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure1 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure2 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure3 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure4 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure5 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/pressure6 plain user text
|
||||
hfactory /sics/$pa(NAME)/status/state plain user text
|
||||
hfactory /sics/$pa(NAME)/status/PLC-S plain user text
|
||||
hfactory /sics/$pa(NAME)/status/PLC-H plain user text
|
||||
hfactory /sics/$pa(NAME)/status/Presr-S plain user text
|
||||
hfactory /sics/$pa(NAME)/status/Presr-H plain user text
|
||||
hfactory /sics/$pa(NAME)/status/Soft-S plain user text
|
||||
hfactory /sics/$pa(NAME)/status/Hard-S plain user text
|
||||
|
||||
hfactory /sics/$pa(NAME)/config plain user none
|
||||
hfactory /sics/$pa(NAME)/config/hv plain user text
|
||||
hfactory /sics/$pa(NAME)/config/mode plain user text
|
||||
hfactory /sics/$pa(NAME)/config/pressure_threshold plain user text
|
||||
|
||||
#makesctcontroller sct_hv rfamp $pa(IP):$pa(PORT)
|
||||
makesctcontroller sct_hv std $pa(IP):$pa(PORT)
|
||||
|
||||
hsetprop /sics/$pa(NAME)/status read ::scobj::hv::getHVStatusFunc "state"
|
||||
hsetprop /sics/$pa(NAME)/status rdHVStatus ::scobj::hv::rdHVStatusFunc /sics/$pa(NAME) "state"
|
||||
|
||||
hsetprop /sics/$pa(NAME)/config read ::scobj::hv::getHVStatusFunc "config"
|
||||
hsetprop /sics/$pa(NAME)/config rdHVStatus ::scobj::hv::rdHVStatusFunc /sics/$pa(NAME) "config"
|
||||
|
||||
# Initialise properties required for generating the API for GumTree and to save data
|
||||
::scobj::hinitprops $pa(NAME) status config
|
||||
::scobj::hinitprops $pa(NAME) status/voltage status/current status/state
|
||||
::scobj::hinitprops $pa(NAME) status/pressure1 status/pressure2 status/pressure3 status/pressure4 status/pressure5 status/pressure6
|
||||
::scobj::hinitprops $pa(NAME) status/PLC-S status/PLC-H status/Presr-S status/Presr-H status/Soft-S status/Hard-S
|
||||
::scobj::hinitprops $pa(NAME) config/hv config/pressure_threshold config/mode
|
||||
|
||||
if {[SplitReply [environment_simulation]]=="false"} {
|
||||
sct_hv poll /sics/$pa(NAME)/status $pa(INTERVAL)
|
||||
sct_hv poll /sics/$pa(NAME)/config $pa(INTERVAL)
|
||||
}
|
||||
|
||||
hsetprop /sics/$pa(NAME) tuning $pa(TUNING)
|
||||
|
||||
if {$pa(TUNING)} {
|
||||
hfactory /sics/$pa(NAME)/set_hv plain user int
|
||||
hfactory /sics/$pa(NAME)/set_pressure plain user int
|
||||
hfactory /sics/$pa(NAME)/set_mode plain user text
|
||||
hfactory /sics/$pa(NAME)/set_date plain user text
|
||||
|
||||
::scobj::hinitprops $pa(NAME) set_hv set_pressure set_mode set_date
|
||||
|
||||
hsetprop /sics/$pa(NAME)/set_hv write ::scobj::hv:setting "voltage"
|
||||
hsetprop /sics/$pa(NAME)/set_hv checkReply ::scobj::hv::checkReplyFunc /sics/$pa(NAME)
|
||||
|
||||
hsetprop /sics/$pa(NAME)/set_pressure write ::scobj::hv:setting "pressure"
|
||||
hsetprop /sics/$pa(NAME)/set_pressure checkReply ::scobj::hv::checkReplyFunc /sics/$pa(NAME)
|
||||
|
||||
hsetprop /sics/$pa(NAME)/set_mode write ::scobj::hv:setting "mode"
|
||||
hsetprop /sics/$pa(NAME)/set_mode checkReply ::scobj::hv::checkReplyFunc /sics/$pa(NAME)
|
||||
|
||||
hsetprop /sics/$pa(NAME)/set_date write ::scobj::hv:setting "date"
|
||||
hsetprop /sics/$pa(NAME)/set_date checkReply ::scobj::hv::checkReplyFunc /sics/$pa(NAME)
|
||||
|
||||
if {[SplitReply [environment_simulation]]=="false"} {
|
||||
sct_hv write /sics/$pa(NAME)/set_hv $pa(INTERVAL)
|
||||
sct_hv write /sics/$pa(NAME)/set_pressure $pa(INTERVAL)
|
||||
sct_hv write /sics/$pa(NAME)/set_mode $pa(INTERVAL)
|
||||
sct_hv write /sics/$pa(NAME)/set_date $pa(INTERVAL)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
proc hvGetStatus {} {
|
||||
set cmd "get status\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvGetConfig {} {
|
||||
set cmd "get config\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvClearError {} {
|
||||
set cmd "clear error\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvSetHV {vol} {
|
||||
set cmd "set hv=$vol\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvSetPressure {pressure} {
|
||||
set cmd "set pressure=$pressure\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvSetMode {mode} {
|
||||
set cmd "set mode=$mode\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvSetDate {date} {
|
||||
set cmd "set date=$date\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvPowerUp {} {
|
||||
set cmd "power up\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvPowerDown {} {
|
||||
set cmd "power down\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
proc hvHelp {} {
|
||||
set cmd "help\r\n"
|
||||
sct_hv send $cmd
|
||||
}
|
||||
|
||||
publish hvGetStatus user
|
||||
publish hvGetConfig user
|
||||
publish hvClearError user
|
||||
publish hvSetHV user
|
||||
publish hvSetPressure user
|
||||
publish hvSetMode user
|
||||
publish hvSetDate user
|
||||
publish hvPowerUp user
|
||||
publish hvPowerDown user
|
||||
publish hvHelp user
|
||||
|
||||
# Main process call
|
||||
::scobj::hv::mkHV {
|
||||
name "hv"
|
||||
IP 137.157.202.215
|
||||
PORT 55011
|
||||
tuning 1
|
||||
interval 5
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user