linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

PSI sics-cvs-psi-complete-tree-post-site-support

Browse Source
This commit is contained in:
koennecke
2004-03-09 15:18:11 +00:00
committed by Douglas Clowes
parent 6373f6b0fb
commit ae77364de2
196 changed files with 8344 additions and 3485 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
doc/user/histogram.htm
View File

@@ -74,16 +74,14 @@ for its number type.
<LI>Count. As Ceil, but a list of overflowed bins will be maintained.
</UL>
<DT> Rank
<DD> Rank defines the number of histograms in memory.
<DT> Length
<DD> gives the length of an individual histogram.
<DD> Rank defines the number of dimensions the detector has, minus the time channle when applicable. 1 is a linear detector, 2 a area detector etc.
<DT> BinWidth
<DD> determines the size of a single bin in histogram memory in bytes.
<DT>dim0, dim1, dim2, ... dimn
<DD>define the logical dimensions of the histogram. Must be set if the
the sum command (see below) is to be used. This is a clutch necessary to
cope with the different notions of dimensions in the SINQ histogram memory
and physics.
<DD>define the logical dimensions of the histogram.
<dt>extrachan
<dd>Extra time channels as used at AMOR and SANS for time-of-flight
monitors. They get appended to the main hm data but are treated separately.
</DL>
</p>
<p>
@@ -126,6 +124,8 @@ will be generated starting from start with a stepwidth of step (example: HM genb
configured with this command. The time bin iNum is set to the value value.
<DT>HM clearbin
<DD>Deletes the currently active time binning information.
<dt>HM notimebin
<dd>returns the number of currently configured timebins.
</DL>
</p>
@@ -150,6 +150,10 @@ transfer the configuration from the host computer to the actual HM.
<DD> starts counting using the currently active values for CountMode and
preset. This command does not block, i.e. in order to inhibit further
commands from the console, you have to give Success afterwards.
<DT>HM countblock
<DD> starts counting using the currently active values for CountMode and
preset. This command does block, i.e. you can give new commands only when
the counting operation finishes.
<DT>HM initval <i>val</i>
<DD> initialises the whole histogram memory to the value val. Ususally 0 in
order to clear the HM.
@@ -164,3 +168,5 @@ allow to retrieve a subset of a histogram between iStart and iEnd.
</p>
</body>
</html>