From a7aa7ea9be186de4df4ebee8c50abeb6096216e6 Mon Sep 17 00:00:00 2001
From: Ferdi Franceschini <ffr@ansto.gov.au>
Date: Thu, 26 Oct 2006 10:32:22 +1000
Subject: [PATCH] Using dns names and port names for motor controllers.

r1185 | ffr | 2006-10-26 10:32:22 +1000 (Thu, 26 Oct 2006) | 2 lines
---
 .../instrument/hrpd/echidna_configuration.tcl | 40 ++++++++++---------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/site_ansto/instrument/hrpd/echidna_configuration.tcl b/site_ansto/instrument/hrpd/echidna_configuration.tcl
index b87024d6..d97cb42a 100644
--- a/site_ansto/instrument/hrpd/echidna_configuration.tcl
+++ b/site_ansto/instrument/hrpd/echidna_configuration.tcl
@@ -1,10 +1,14 @@
-# $Revision: 1.1 $
-# $Date: 2006-10-13 06:39:42 $
+# $Revision: 1.2 $
+# $Date: 2006-10-26 00:32:22 $
 # Author: Ferdi Franceschini (ffr@ansto.gov.au)
 # Last revision by: $Author: ffr $
 
 #START SERVER CONFIGURATION SECTION
 source dmc2280_util.tcl
+set quieckport quieck-echidna
+set serverport server-echidna
+set interruptport interrupt-echidna
+set telnetport telnet-echidna
 source server_config.tcl
 #END SERVER CONFIGURATION SECTION
 
@@ -45,27 +49,27 @@ Instrument lock
 #setHomeandRange -motor ephi -home 0 -lowrange 0 -uprange 360
 
 # Setup addresses of Galil DMC2280 controllers.
-set dmc2280_controller1(host) 137.157.201.2
-set dmc2280_controller1(port) 1034
+set dmc2280_controller1(host) mc1-echidna
+set dmc2280_controller1(port) pmc1-echidna
 
-set dmc2280_controller2(host) 137.157.201.3
-set dmc2280_controller2(port) 1034
+set dmc2280_controller2(host) mc2-echidna
+set dmc2280_controller2(port) pmc2-echidna
 
-set dmc2280_controller3(host) 137.157.201.4
-set dmc2280_controller3(port) 1034
+set dmc2280_controller3(host) mc3-echidna
+set dmc2280_controller3(port) pmc3-echidna
 
-set dmc2280_controller4(host) 137.157.201.5
-set dmc2280_controller4(port) 1034
+set dmc2280_controller4(host) mc4-echidna
+set dmc2280_controller4(port) pmc4-echidna
 
 # Run slit homing routines on controllers 3 and 4
-if [catch {dmc_connect dmc2280_controller3} ] {
-  dmc_sendCmd dmc2280_controller3 "XQ#HOME,1"
-  dmc_close dmc2280_controller3
-}
-if [catch {dmc_connect dmc2280_controller4} ] {
-  dmc_sendCmd dmc2280_controller4 "XQ#HOME,1"
-  dmc_close dmc2280_controller4
-}
+#if [catch {dmc_connect dmc2280_controller3} ] {
+#  dmc_sendCmd dmc2280_controller3 "XQ#HOME,1"
+#  dmc_close dmc2280_controller3
+#}
+#if [catch {dmc_connect dmc2280_controller4} ] {
+#  dmc_sendCmd dmc2280_controller4 "XQ#HOME,1"
+#  dmc_close dmc2280_controller4
+#}
 
 # Monochromator omega, rotate
 Motor mom DMC2280 [params \