configurationi init

r3261 | jgn | 2011-11-18 14:12:45 +1100 (Fri, 18 Nov 2011) | 1 line

site_ansto/instrument/pelican/config/commands/monodrive.tcl

@@ -0,0 +1,104 @@
+ 
+# Drive the 3 Monochromator blades as a "bunch" 
+#
+# Author: Jing Chen, jgn@ansto.gov.au
+# 
+# Date: 11/11/2011
+
+
+# DriveMono: drive the 3 Monochromators to translating as a "bunch"
+
+proc DriveMono {motor pos angle} {
+	histmem stop
+	bat_table -set NO_BAT_ENTRIES $framenum NO_BAT_PERIODS $framenum 
+	bat_table -set NO_REPEAT_ENTRY 1 NO_REPEAT_TABLE 1 NO_EXECUTE_TABLE 1 PERIOD_INDICES { 0 1 }
+	fat_table -set NOS_PERIODS $framenum
+	oat_table -set T {0 2200000} NTC 1
+	histmem loadconf
+	histmem fsrce EXTERNAL
+}
+
+publish DriveMono user
+
+# SetHistoNormal: resets the histo for standard operation
+
+proc SetHistoNormal {} {
+	histmem stop
+	bat_table -set NO_BAT_ENTRIES 1 NO_BAT_PERIODS 1 
+	bat_table -set NO_REPEAT_ENTRY 0 NO_REPEAT_TABLE 0 NO_EXECUTE_TABLE 0 PERIOD_INDICES { 0}
+	fat_table -set NOS_PERIODS 1
+	oat_table -set T {0 2200000} NTC 1
+	histmem loadconf
+	histmem fsrce INTERNAL
+	proc ::histogram_memory::pre_count {} {}
+}
+
+# continous scan for EPHI- the euler cradle phi stage (innermost axis)
+# note make sure controller 2 has the PHISCAN code in it 
+
+publish SetHistoNormal user
+
+
+proc EphiCtsScan {start step range steptime} {
+
+# magic number: steps per rotation for phi
+	set ephisteps -12500
+	set ephispeed [expr {($step*1.0)/$steptime}]
+	set numsteps [expr {round($range/$step)}]
+# broadcast $omspeed $numsteps
+
+# run ephi to start angle -1 so that first pulse signals as ephi crosses 0 angle
+# at correct velocity
+	ephi accel 1
+	ephi decel 1
+	ephi speed 3
+	drive ephi [expr {$start-1}]
+	ephi speed $ephispeed
+	ephi accel [expr {$ephispeed*1.2}]
+
+# now set ephi parameters to galil and clear the bit
+
+	set scval [expr {($range+2.2)*$ephisteps}]
+	set stval [expr {$ephisteps * $step}]
+broadcast $scval $stval
+	som send CTLEN=$scval
+	som send CTSTEP=$stval
+#	som send OMN = [expr {$numsteps+1}]
+	som send CB5
+
+	proc ::histogram_memory::pre_count {} {
+		ephi send "XQ #EPHSCAN,2"
+	}
+
+	histmem mode unlimited
+	histmem start block
+
+	newfile HISTOPERIOD_XY
+	for {set i 0} {$i<$numsteps} {incr i} {save $i}
+	ephi speed 1
+
+
+#	this we needed when it didn't work properly
+#	proc ::histogram_memory::pre_count {} {} 
+#	ephi send SHC
+#	ephi send SPC=25000
+#	ephi send BCG
+#	wait 3
+#	ephi send "XQ #THREAD0,0"
+#	wait 3
+#	ephi reset
+}
+publish EphiCtsScan user
+
+proc EulerCtsScan {range step steptime} {
+	set numsteps [expr {round($range/$step)}]
+	SetHistoSync $numsteps
+	foreach chi {0 15 30 45 60 75 90} {
+		drive echi $chi
+		EphiCtsScan [expr {-$range/2}] $step $range $steptime
+	}
+#	SetHistoNormal
+}
+
+publish EulerCtsScan user
+