linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

- Implemented defpos for multiple motors

Browse Source 
- Implemented automatic backup on parameter change
- Implemented silent restore
- Cleaned a couple of unused flags from connection object
This commit is contained in:
cvs
2003-02-19 08:29:46 +00:00
parent e6d39f3ac8
commit 98cfb3ddda
31 changed files with 491 additions and 101 deletions
Download Patch File Download Diff File Expand all files Collapse all files

48
Makefile
View File

@ -16,12 +16,12 @@ FORTIFYOBJ = fortify.o strdup.o
#========================================================================== #==========================================================================
# assign if the National Instrument GPIB driver is available # assign if the National Instrument GPIB driver is available
NI= -DHAVENI #NI= -DHAVENI
NIOBJ= nigpib.o #NIOBJ= nigpib.o
NILIB=-lgpibenet #NILIB=-lgpibenet
#NI= NI=
#NIOBJ= NIOBJ=
#NILIB= NILIB=
#----- comment or uncomment if a difrac version is required #----- comment or uncomment if a difrac version is required
# Do not forget to remove or add comments to ofac.c as well if changes # Do not forget to remove or add comments to ofac.c as well if changes
@ -72,18 +72,18 @@ VELOOBJ = velo.o velosim.o velodorn.o velodornier.o
#----- comment or uncomment the following according to operating system #----- comment or uncomment the following according to operating system
#------------- for Digital Unix #------------- for Digital Unix
#BINTARGET = bin BINTARGET = bin
#HDFROOT=/data/lnslib HDFROOT=/data/lnslib
#CC=cc CC=cc
#EXTRA= EXTRA=
#CFLAGS = -I$(HDFROOT)/include -Ihardsup -DHDF4 -DHDF5 -I. -std1 \ #CFLAGS = -I$(HDFROOT)/include -Ihardsup -DHDF4 -DHDF5 -I. -std1 \
# -g -warnprotos -c # -g -warnprotos -c
#CFLAGS = -I$(HDFROOT)/include -DFORTIFY -DHDF4 -DHDF5 -Ihardsup -g \ CFLAGS = -I$(HDFROOT)/include -DFORTIFY -DHDF4 -DHDF5 -Ihardsup -g \
# -std1 -warnprotos -c -std1 -warnprotos -c
#LIBS = -L$(HDFROOT)/lib -Lhardsup -lhlib -Lmatrix -lmatrix -Ltecs \ LIBS = -L$(HDFROOT)/lib -Lhardsup -lhlib -Lmatrix -lmatrix -Ltecs \
# -ltecsl -ltcl8.0 -lfor $(HDFROOT)/lib/libhdf5.a \ -ltecsl -ltcl8.0 -lfor $(HDFROOT)/lib/libhdf5.a \
# $(HDFROOT)/lib/libmfhdf.a $(HDFROOT)/lib/libdf.a \ $(HDFROOT)/lib/libmfhdf.a $(HDFROOT)/lib/libdf.a \
# $(HDFROOT)/lib/libjpeg.a -lz -lm -ll -lc $(HDFROOT)/lib/libjpeg.a -lz -lm -ll -lc
#------- for cygnus #------- for cygnus
#HDFROOT=../HDF411 #HDFROOT=../HDF411
@ -94,16 +94,16 @@ VELOOBJ = velo.o velosim.o velodorn.o velodornier.o
# -lmfhdf -ldf -ljpeg -lz -lm # -lmfhdf -ldf -ljpeg -lz -lm
#---------- for linux #---------- for linux
BINTARGET=../../bin #BINTARGET=../../bin
HDFROOT=$(SINQDIR)/linux #HDFROOT=$(SINQDIR)/linux
CC=gcc #CC=gcc
#CFLAGS = -I$(HDFROOT)/include -DHDF4 -DHDF5 $(NI) -Ihardsup \ #CFLAGS = -I$(HDFROOT)/include -DHDF4 -DHDF5 $(NI) -Ihardsup \
# -fwritable-strings -DCYGNUS -DNONINTF -g -c # -fwritable-strings -DCYGNUS -DNONINTF -g -c
CFLAGS = -I$(HDFROOT)/include -DFORTIFY -DHDF4 -DHDF5 $(NI) -Ihardsup \ #CFLAGS = -I$(HDFROOT)/include -DFORTIFY -DHDF4 -DHDF5 $(NI) -Ihardsup \
-fwritable-strings -DCYGNUS -DNONINTF -g -c # -fwritable-strings -DCYGNUS -DNONINTF -g -c
LIBS= -L$(HDFROOT)/lib -Lhardsup -Ltecs -ltecsl -Lmatrix -lmatrix -lhlib \ #LIBS= -L$(HDFROOT)/lib -Lhardsup -Ltecs -ltecsl -Lmatrix -lmatrix -lhlib \
$(NILIB) -ltcl -lhdf5 -lmfhdf -ldf -ljpeg -lz -lm -lg2c -ldl # $(NILIB) -ltcl -lhdf5 -lmfhdf -ldf -ljpeg -lz -lm -lg2c -ldl
EXTRA=nintf.o #EXTRA=nintf.o
#--------------------------------- #---------------------------------
.c.o: .c.o:

7
SCinter.c
View File

@ -221,17 +221,10 @@ extern char *SkipSpace(char *pPtr);
SICSLogWrite(pBueffel,eCommand); SICSLogWrite(pBueffel,eCommand);
} }
else else
{
if(!pCon->iDummy)
{ {
printf("Executing -> %s <- from dummy socket\n", pText); printf("Executing -> %s <- from dummy socket\n", pText);
}
else
{
sprintf(pBueffel,"Executing -> %s <- from sicscron",pText);
SICSLogWrite(pBueffel,eCommand); SICSLogWrite(pBueffel,eCommand);
} }
}
/* convert to argc, argv */ /* convert to argc, argv */
argc = 0; argc = 0;

154
conman.c
View File

@ -130,7 +130,6 @@ extern pServer pServ;
pRes->pSics = pSics; pRes->pSics = pSics;
pRes->eInterrupt = eContinue; pRes->eInterrupt = eContinue;
pRes->lMagic = CONMAGIC; pRes->lMagic = CONMAGIC;
pRes->iDummy = 0;
pRes->iLogin = 0; pRes->iLogin = 0;
pRes->conStart = time(NULL); pRes->conStart = time(NULL);
pRes->write = SCNormalWrite; pRes->write = SCNormalWrite;
@ -216,7 +215,6 @@ extern pServer pServ;
pRes->pSics = pSics; pRes->pSics = pSics;
pRes->lMagic = CONMAGIC; pRes->lMagic = CONMAGIC;
pRes->eInterrupt = eContinue; pRes->eInterrupt = eContinue;
pRes->iDummy = 0;
pRes->iLogin = 0; pRes->iLogin = 0;
pRes->conStart = time(NULL); pRes->conStart = time(NULL);
pRes->write = SCNormalWrite; pRes->write = SCNormalWrite;
@ -546,6 +544,24 @@ extern pServer pServ;
} }
return self->write(self,pBuffer,iOut); return self->write(self,pBuffer,iOut);
} }
/*-------------------------------------------------------------------------*/
writeFunc SCGetWriteFunc(SConnection *self)
{
if(!VerifyConnection(self))
{
return 0;
}
return self->write;
}
/*-------------------------------------------------------------------------*/
void SCSetWriteFunc(SConnection *self, writeFunc x)
{
if(!VerifyConnection(self))
{
return;
}
self->write = x;
}
/*--------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------*/
static int SCNormalWrite(SConnection *self, char *buffer, int iOut) static int SCNormalWrite(SConnection *self, char *buffer, int iOut)
{ {
@ -658,6 +674,95 @@ extern pServer pServ;
} }
return 1; return 1;
} }
/*--------------------------------------------------------------------------*/
int SCOnlySockWrite(SConnection *self, char *buffer, int iOut)
{
int i, iPtr, iRet;
char pBueffel[80];
if(!VerifyConnection(self))
{
return 0;
}
/* log it for any case */
if(self->pSock)
{
iRet = self->pSock->sockid;
}
else
{
iRet = 0;
}
sprintf(pBueffel,"Next line intended for socket: %d",iRet);
SICSLogWrite(pBueffel,eInternal);
SICSLogWrite(buffer,iOut);
/* put it into the interpreter if present */
if(SCinMacro(self))
{
InterpWrite(self->pSics,buffer);
}
else /* not in interpreter, normal logic */
{
/* is this really to be printed ? */
if(iOut < self->iOutput)
return 0;
/* the socket */
if(self->pSock)
{
if(self->iTelnet)
{
iRet = TelnetWrite(self->pSock,buffer);
}
else
{
iRet = NETWrite(self->pSock,buffer,strlen(buffer));
if(!HasNL(buffer))
{
iRet = NETWrite(self->pSock,"\n",sizeof("\n"));
}
}
if(!iRet)
{
SCnoSock(self);
WriteToCommandLog("SYS> ","Send broken to connection");
}
}
else
{
printf("%s \n",buffer);
}
}
return 1;
}
/*--------------------------------------------------------------------------*/
int SCNotWrite(SConnection *self, char *buffer, int iOut)
{
int i, iPtr, iRet;
char pBueffel[80];
if(!VerifyConnection(self))
{
return 0;
}
/* log it for any case */
if(self->pSock)
{
iRet = self->pSock->sockid;
}
else
{
iRet = 0;
}
sprintf(pBueffel,"Next line intended for socket: %d",iRet);
SICSLogWrite(pBueffel,eInternal);
SICSLogWrite(buffer,iOut);
return 1;
}
/*-------------------------------------------------------------------------- /*--------------------------------------------------------------------------
This version writes only to configured log files but not to sockets. This version writes only to configured log files but not to sockets.
Used for automatic file execution for the WWW interface Used for automatic file execution for the WWW interface
@ -1176,33 +1281,13 @@ extern pServer pServ;
return self->eInterrupt; return self->eInterrupt;
} }
/*--------------------------------------------------------------------------*/
void SCSetError(SConnection *self, int eCode)
{
if(!VerifyConnection(self))
{
return;
}
self->iErrCode = eCode;
}
/*---------------------------------------------------------------------------*/
int SCGetError(SConnection *self)
{
if(!VerifyConnection(self))
{
return 0;
}
return self->iErrCode;
}
/* --------------------------------------------------------------------------*/ /* --------------------------------------------------------------------------*/
int SCInvoke(SConnection *self, SicsInterp *pInter, char *pCommand) int SCInvoke(SConnection *self, SicsInterp *pInter, char *pCommand)
{ {
int iRet; int iRet;
long lLen; long lLen;
const char *pResult = NULL; const char *pResult = NULL;
char *pBuffer = NULL; char *pBuffer = NULL, *pFile = NULL;
char pBueffel[80]; char pBueffel[80];
int i, iSpace; int i, iSpace;
@ -1238,8 +1323,20 @@ extern pServer pServ;
/* invoke */ /* invoke */
self->inUse++; self->inUse++;
self->eInterrupt = eContinue; self->eInterrupt = eContinue;
self->iErrCode = OKOK; self->parameterChange = 0;
iRet = InterpExecute(pInter,self,pCommand); iRet = InterpExecute(pInter,self,pCommand);
if(self->parameterChange == 1)
{
/*
automatically save changed parameters
*/
pFile = IFindOption(pSICSOptions,"statusfile");
if(pFile != NULL)
{
WriteSicsStatus(pInter,pFile,0);
self->parameterChange = 0;
}
}
self->inUse--; self->inUse--;
return iRet; return iRet;
} }
@ -1701,3 +1798,12 @@ extern pServer pServ;
self->iGrab = 1; self->iGrab = 1;
} }
} }
/*-----------------------------------------------------------------------*/
void SCparChange(SConnection *self)
{
if(!VerifyConnection(self))
{
return;
}
self->parameterChange = 1;
}

22
conman.h
View File

@ -22,6 +22,9 @@
#define MAXLOGFILES 10 #define MAXLOGFILES 10
typedef int (*writeFunc)(struct __SConnection *pCon,
char *pMessage, int iCode);
typedef struct __SConnection { typedef struct __SConnection {
/* object basics */ /* object basics */
pObjectDescriptor pDes; pObjectDescriptor pDes;
@ -35,8 +38,7 @@
int iTelnet; int iTelnet;
int iOutput; int iOutput;
int iFiles; int iFiles;
int (*write)(struct __SConnection *pCon, writeFunc write;
char *pMessage, int iCode);
mkChannel *pDataSock; mkChannel *pDataSock;
char *pDataComp; char *pDataComp;
int iDataPort; int iDataPort;
@ -45,11 +47,12 @@
int eInterrupt; int eInterrupt;
int iUserRights; int iUserRights;
int inUse; int inUse;
int iDummy;
int iGrab; int iGrab;
int iErrCode;
SicsInterp *pSics; SicsInterp *pSics;
/* flag for parameter change */
int parameterChange;
/* a FIFO */ /* a FIFO */
pCosta pStack; pCosta pStack;
@ -88,19 +91,22 @@
int SCnoSock(SConnection *pCon); int SCnoSock(SConnection *pCon);
int SCWriteUUencoded(SConnection *pCon, char *pName, void *iData, int iLen); int SCWriteUUencoded(SConnection *pCon, char *pName, void *iData, int iLen);
int SCWriteZipped(SConnection *pCon, char *pName, void *pData, int iDataLen); int SCWriteZipped(SConnection *pCon, char *pName, void *pData, int iDataLen);
writeFunc SCGetWriteFunc(SConnection *pCon);
void SCSetWriteFunc(SConnection *pCon, writeFunc x);
int SCOnlySockWrite(SConnection *self, char *buffer, int iOut);
int SCNotWrite(SConnection *self, char *buffer, int iOut);
/************************* CallBack *********************************** */ /************************* CallBack *********************************** */
int SCRegister(SConnection *pCon, SicsInterp *pSics, int SCRegister(SConnection *pCon, SicsInterp *pSics,
void *pInter, long lID); void *pInter, long lID);
int SCUnregister(SConnection *pCon, void *pInter); int SCUnregister(SConnection *pCon, void *pInter);
/******************************* Error **************************************/ /******************************* Interrupt *********************************/
void SCSetInterrupt(SConnection *self, int eCode); void SCSetInterrupt(SConnection *self, int eCode);
int SCGetInterrupt(SConnection *self); int SCGetInterrupt(SConnection *self);
void SCSetError(SConnection *pCon, int iCode);
int SCGetError(SConnection *pCon);
/****************************** Macro ***************************************/ /****************************** Macro ***************************************/
int SCinMacro(SConnection *pCon); int SCinMacro(SConnection *pCon);
int SCsetMacro(SConnection *pCon, int iMode); int SCsetMacro(SConnection *pCon, int iMode);
/************************** parameters changed ? **************************/
void SCparChange(SConnection *pCon);
/* *************************** Info *************************************** */ /* *************************** Info *************************************** */
int SCGetRights(SConnection *self); int SCGetRights(SConnection *self);
int SCSetRights(SConnection *pCon, int iNew); int SCSetRights(SConnection *pCon, int iNew);

10
counter.c
View File

@ -230,7 +230,6 @@
{ {
SCWrite(pCon,"ERROR: Cannot fix counter problem, aborting",eError); SCWrite(pCon,"ERROR: Cannot fix counter problem, aborting",eError);
SCSetInterrupt(pCon,eAbortBatch); SCSetInterrupt(pCon,eAbortBatch);
SCSetError(pCon,eCt);
return eCt; return eCt;
} }
else else
@ -795,6 +794,7 @@
if(isAuthorised(pCon,usUser)) if(isAuthorised(pCon,usUser))
{ {
iRet2 = SetCounterPreset(self,PaRes.Arg[0].fVal); iRet2 = SetCounterPreset(self,PaRes.Arg[0].fVal);
SCparChange(pCon);
if(iRet2) if(iRet2)
SCSendOK(pCon); SCSendOK(pCon);
return iRet2; return iRet2;
@ -823,12 +823,14 @@
if(strcmp(PaRes.Arg[0].text,"timer") == 0) if(strcmp(PaRes.Arg[0].text,"timer") == 0)
{ {
SetCounterMode(self,eTimer); SetCounterMode(self,eTimer);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
else if(strcmp(PaRes.Arg[0].text,"monitor") == 0) else if(strcmp(PaRes.Arg[0].text,"monitor") == 0)
{ {
SetCounterMode(self,ePreset); SetCounterMode(self,ePreset);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -869,6 +871,7 @@
return 0; return 0;
} }
self->iExponent = PaRes.Arg[0].iVal; self->iExponent = PaRes.Arg[0].iVal;
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
case 8: /* GetExponent */ case 8: /* GetExponent */
@ -960,6 +963,7 @@
} }
else else
{ {
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -982,12 +986,14 @@
if(strcmp(PaRes.Arg[0].text,"timer") == 0) if(strcmp(PaRes.Arg[0].text,"timer") == 0)
{ {
SetCounterMode(self,eTimer); SetCounterMode(self,eTimer);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
else if(strcmp(PaRes.Arg[0].text,"monitor") == 0) else if(strcmp(PaRes.Arg[0].text,"monitor") == 0)
{ {
SetCounterMode(self,ePreset); SetCounterMode(self,ePreset);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -1025,6 +1031,7 @@
iRet2 = SetCounterPreset(self,PaRes.Arg[0].fVal); iRet2 = SetCounterPreset(self,PaRes.Arg[0].fVal);
if(iRet2) if(iRet2)
SCSendOK(pCon); SCSendOK(pCon);
SCparChange(pCon);
return iRet2; return iRet2;
} }
else else
@ -1069,6 +1076,7 @@
PaRes.Arg[1].iVal, PaRes.Arg[2].fVal); PaRes.Arg[1].iVal, PaRes.Arg[2].fVal);
if(iRet == 1) if(iRet == 1)
{ {
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }

4
devexec.c
View File

@ -196,7 +196,6 @@
if(!pNew) if(!pNew)
{ {
SCWrite(pCon,"ERROR: memory exhausted in Device Executor ",eError); SCWrite(pCon,"ERROR: memory exhausted in Device Executor ",eError);
SCSetError(pCon,NOMEMORY);
return 0; return 0;
} }
@ -240,7 +239,6 @@
{ {
sprintf(pBueffel,"ERROR: cannot start device %s",name); sprintf(pBueffel,"ERROR: cannot start device %s",name);
SCWrite(pCon,pBueffel,eError); SCWrite(pCon,pBueffel,eError);
SCSetError(self->pOwner,iRet);
DeleteDevEntry(pNew); DeleteDevEntry(pNew);
if(LLDcheck(self->iList) >= LIST_EMPTY) if(LLDcheck(self->iList) >= LIST_EMPTY)
{ {
@ -398,7 +396,6 @@
self->iStatus = DEVDONE; self->iStatus = DEVDONE;
break; break;
case HWFault: /* real HW error: burning, no net etc.. */ case HWFault: /* real HW error: burning, no net etc.. */
SCSetError(self->pOwner,iRet);
DeleteDevEntry(pDev); DeleteDevEntry(pDev);
LLDnodeDelete(self->iList); LLDnodeDelete(self->iList);
self->iStatus = DEVERROR; self->iStatus = DEVERROR;
@ -442,7 +439,6 @@
self->iStatus = DEVBUSY; self->iStatus = DEVBUSY;
break; break;
case HWPosFault: /* cannot get somewhere... */ case HWPosFault: /* cannot get somewhere... */
SCSetError(self->pOwner,eCode);
DeleteDevEntry(pDev); DeleteDevEntry(pDev);
LLDnodeDelete(self->iList); LLDnodeDelete(self->iList);
self->iStatus = DEVERROR; self->iStatus = DEVERROR;

197
doc/manager/hwini.htm
View File

@ -63,6 +63,77 @@ number of the motor in the EL734DC motor controller.
<dd>Creates a piezo electric positioning device. Again the controller is a <dd>Creates a piezo electric positioning device. Again the controller is a
Physik Instrumente controller. pararray has the same meaning as for the Physik Instrumente controller. pararray has the same meaning as for the
C804 controller given above. C804 controller given above.
<dt>Motor name ecb ecbcontroller ecb-number lowerlimit upperlimit
<dd>This creates a motor which is controlled through the Risoe ECB
electronic. The parameters:
<dl>
<dt>ecbcontroller
<dd>The ECB controller to which this motor is connected to. See below
for more on ECB controllers.
<dt>ecb-number
<dd>Number of the motor in the ECB system.
<dt>lowerlimit
<dd>The lower hardware limit for this motors operation
<dt>upperlimit
<dd>The upper hardware limit for this motors operation
</dl>
In contrast to normal motors, the ECB motors have quite a number of
hardware parameters which must be configured. The general syntax to
configure them is: motorname parametername value. The following
parameters are available:
<dl>
<dt>encoder
<dd>0 if there is no encoder for this motor, 1-3 for the encoder used
for this motor.
<dt>control
<dd>The control bit flag. This falg determines if the motor sets a
control bit in the ECB controller. This control bit can be used to
drive air cushions and the like. If required set to 1, else leave at
0.
<dt>delay
<dd>Delay time to wait after setting a control bit.
<dt>range
<dd>The speed range for the motor: 0 for slow, 1 for fast
<dt>multi
<dd>The ECB controller supports up to 24 motors. In some instances
this is not enough. Then one ECB channel can be multiplexed into
several motors. This flag (),1) determines if this is the case.
<dt>multchan
<dd>The multiplexer channel for a multiplexed motor.
<dt>port
<dd>The ECB port a multiplexed motor is using.
<dt>acceleration
<dd>The speed with which the motor accelerates to its final speed.
<dt>rotation_dir
<dd>Rotation direction of the motor.
<dt>startspeed
<dd>Starting speed of the motor.
<dt>maxspeed
<dd>The maximum speed for this motor.
<dt>auto
<dd>Speed in automatic mode
<dt>manuell
<dd>Speed used when driving the motor through the manual control box.
<dt>offset
<dd>When using an encoder: the offset between the motor zero and the
encoder zero.
<dt>dtolerance
<dd>hardware tolerance of the motor.
<dt>step2dig
<dd>conversion factor from encoder steps to physical values.
<dt>step2deg
<dd>Conversion factor from motor pseudo encoder steps to physical
values.
<dt>backlash
<dd>In order to correct for backlash, Risoe motors always approach a
target position from the same direction. In order to do this the motor
has to overshoot and drive back when driving in the wrong
direction. The parameter backlash determines how much to overshoot.
</dl>
ECB motors have another quirck: 8 motors in a rack share a power
supply! This has the consequence that only one of the 8 motors can run
at any given time. In SICS this is directed through the anticollider
module described elsewhere.
</DL> </DL>
</p> </p>
@ -79,6 +150,9 @@ failures. This can be used in a instrument simulation server.
<DD>This command creates a single <DD>This command creates a single
counter name, using an EL737 driver. The counter is at host host, listening counter name, using an EL737 driver. The counter is at host host, listening
at port port and sits at serial port chan. at port port and sits at serial port chan.
<dt> MakeCounter name ecb ecb-controller
<dd>Installs a counetr on top of the Risoe ECB hardware. The only
parameter is the name of the ECB controller to use.
<DT>MakeHMControl name counter hm1 hm2 hm3 <DT>MakeHMControl name counter hm1 hm2 hm3
<dd>At some instruments (for instance TRICS) multiple counters or <dd>At some instruments (for instance TRICS) multiple counters or
histogram memories are controlled by a master counter which watches histogram memories are controlled by a master counter which watches
@ -109,8 +183,9 @@ HM. Histogram memory objects can be created using the command:
<DT> MakeHM name type <DT> MakeHM name type
<DD> The parameter name specifies the name under which the HM will be <DD> The parameter name specifies the name under which the HM will be
avialable in the system. type specifies which type of driver to use. avialable in the system. type specifies which type of driver to use.
Currently two types of drivers are supported: SIM for a simulated HM and Currently three types of drivers are supported: SIM for a simulated HM
SINQHM for the SINQ histogram memory. Please care to note, that the SINQHM , SINQHM for the SINQ histogram memory and tdc for the Risoe histogram memory.
Please care to note, that the SINQHM
requires a EL737 counter box for count control. This counter must have been requires a EL737 counter box for count control. This counter must have been
defined before creating the HM object. defined before creating the HM object.
</DL> </DL>
@ -121,7 +196,7 @@ MakeHM banana SINQHM
banana configure HistMode Normal banana configure HistMode Normal
banana configure OverFlowMode Ceil banana configure OverFlowMode Ceil
banana configure Rank 1 banana configure Rank 1
banana configure Length 400 banana configure dim0 400
banana configure BinWidth 4 banana configure BinWidth 4
banana preset 100. banana preset 100.
banana CountMode Timer banana CountMode Timer
@ -237,6 +312,122 @@ which the device is connected. This is usally the port number plus 3000.
To be expanded. Please note, that environment devices such as temperature To be expanded. Please note, that environment devices such as temperature
controllers are dynamically configured into the system at run time. controllers are dynamically configured into the system at run time.
Therefore the necessary commands are described in the user documentation. Therefore the necessary commands are described in the user documentation.
</p>
<h3>GPIB Controller Access</h3>
<p>
GPIB is yet another bus system. Up to 30 devices can share the bus and
transfer data on it. SICS likest to speak to GPIB devices through the
National Instrument ENET-100 TCP/IP bridge. In order for this to work
the National Instruments driver software must have been installed on
the computer running SICS. SICS has to be compiled with the define
HAVENI defined and the proper paths to the header file and library
configured. The an GPIB controller can be installed into SICS with the
command:
<pre>
MakeGPIB name drivertype
</pre>
Name is the name under which the GPIB controller is addressable within
SICS afterwards. drivertype is the driver to use for the GPIB
device. Supported values are:
<dl>
<dt>sim
<dd>Simulation
<dd>ni
<>National instruments driver, see above.
</dl>
The GPIB controller supports a couple of commands for communicating
with devices on the GPIB bus directly. Use with extra care because it
is very easy to lock things up on the GPIB bus. In the following
documantation of the command set it is assumed that a GPIB controller
has been configured into the system under the name <b>gpib</>. Please
note, that managers privilege is required in order to be allowed to
wrestle with this controller.
<dL>
<dt>
</dl>gpib attach controller-no gpib-address gpib-secondary timeout
eos eot
<dd>This attaches the GPIB controller to a certain device at a certain
address for later communication. The return value is an integer
handle which will be used later on a s a handle devID when referring
to the conenction. The parameters are:
<dl>
<dt>controller-no
<dd>The number of the GPIB controller on the computer. There may be
more then one GPIB controllerinstalled on a given system. Usually this
is 0.
<dt>gpib-address
<dd>The GPIB address of the device on the bus.
<dt>gpib-secondary
<DD>GPIB devices may have a seconadry address. This can be specified
with this parameter. Usually this is 0.
<dt>timeout
<dd>The time to wait for answers on the GPIB bus. 13 is 10 seconds and
ussually a good value.
<dt>eot
<dd>A parameter determining the termination mode on this
connection. Consult NI documentation for this or leave at 0.
<dt>eoi
<dd> A terminator. Set to 1 or understand NI documentation for this
parameter.
</dt>
<dt>gpib detach devID
<dd>Breaks the connection described through devID. devID is the return
value from attach.
<dt>gpib clear devID
<dd>Tries to clear the GPIB buffers for the conenction described
through devID. Usually in vain.
<dt>gpib send devID bal bla bla
<dd>sends data to the device at devID.
<dt>gpib sendwithterm devID string terminator
<dd>Sends string to the device at devID. The terminator character
identified through the integer terminator is automatically
appended. Use this to send things which require a
terminator. Terminators included in strings sent by send get messed up
through Tcl!
<dt>gpib read devID
<dd>Reads data from the device at devID and returns it as a string.
<dt>gpib readtillterm devID terminator
<dd>Read from teh device devID unti the terminator character described
through the interger terminator is read. Then return the data read as
a string.
</dl>
</p>
<h3>ECB Controllers</h3>
<p>
ECB controllers are at the heart of the Risoe data aquisition
system. These are essentially Z80 processors wired to the GPIB
bus. Functions can be invoked in this processor by sending a function
code followed by the contents of 4 8 bit registers. As a result the
contents of the registers after the function call are returned. A ECB
can be made knwon to SICS through the initialisation command:
<pre>
MakeECB name gpib-controller gbib-controller-number gpib-address
</pre>
The parameters:
<dl>
<dt>name
<dd>The name used as a token for this controller later on.
<dt>gpib-controller
<dd>the name of the GPIB interface to use. See above.
<dt>gbib-controller-no
<dd>The number of the GPIB board in the system
<dt>gpib-address
<dd>The GPIB address of the ECB on the GPIB bus.
</dl>
Once installed, the ECB controller understands a few commands:
<dl>
<dt>ecb1 func funcode d e bc
<dd>Invoke ECB function funcode with the registers d e b c.Returns the
contents of the registers d e b c. Function codes and register
contents are documented, if at all, in the ECB documentation.
<dt>ecb1 clear
<dd>Tries, usually in vain, to clear the communications interface to
the ECB.
<dt>ecb1 toint char
<dd>A helper function which converts the character char to an
integer. Tcl does not seem to be able to do that.
</dl>
</p> </p>
</body> </body>
</html> </html>

4
doc/user/sanscom.htm
View File

@ -38,9 +38,7 @@ will not do a trick.
position name. Afterwards this position can be reached by typing: COP name. position name. Afterwards this position can be reached by typing: COP name.
<DT> COP defpos name mot val mot val .... <DT> COP defpos name mot val mot val ....
<DD> this command defines a named position named name. This must be followed <DD> this command defines a named position named name. This must be followed
by a list of motor names to run and their values. The motor names must be by a list of motor alias names to run and their values.
those listed as <a href = sanslist.htm>SANS motors </a>. (Not yet
implemented).
<DT> COP drop name <DT> COP drop name
<DD> deletes the named position specified as second parameter. <DD> deletes the named position specified as second parameter.
<DT> COP axis = val axis = val ........ <DT> COP axis = val axis = val ........

1
drive.c
View File

@ -131,7 +131,6 @@
if(SCGetInterrupt(pCon) == eAbortOperation) if(SCGetInterrupt(pCon) == eAbortOperation)
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
sprintf(pBueffel,"Driving %s aborted at %9.3f",name, fPos); sprintf(pBueffel,"Driving %s aborted at %9.3f",name, fPos);
SCWrite(pCon,pBueffel,eStatus); SCWrite(pCon,pBueffel,eStatus);
} }

3
ecb.c
View File

@ -14,6 +14,7 @@
#include <assert.h> #include <assert.h>
#include <errno.h> #include <errno.h>
#include <tcl.h> #include <tcl.h>
#include <unistd.h>
#include "fortify.h" #include "fortify.h"
#include "sics.h" #include "sics.h"
#include "ecb.h" #include "ecb.h"
@ -291,9 +292,11 @@ int ECBAction(SConnection *pCon, SicsInterp *pSics, void *pData,
Only managers will be allowed to wrestle directly with ECB Only managers will be allowed to wrestle directly with ECB
controllers. controllers.
*/ */
if(!SCinMacro(pCon)){
if(!SCMatchRights(pCon,usMugger)){ if(!SCMatchRights(pCon,usMugger)){
return 0; return 0;
} }
}
if(argc < 2){ if(argc < 2){
SCWrite(pCon,"ERROR: keyword required for ECB",eError); SCWrite(pCon,"ERROR: keyword required for ECB",eError);

1
fitcenter.c
View File

@ -337,7 +337,6 @@
if(SCGetInterrupt(pCon) == eAbortOperation) if(SCGetInterrupt(pCon) == eAbortOperation)
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
SCWrite(pCon,"Driving Aborted",eStatus); SCWrite(pCon,"Driving Aborted",eStatus);
} }
return 0; return 0;

9
gpibcontroller.c
View File

@ -33,7 +33,7 @@ int GPIBread(pGPIB self, int devID, void *buffer, int bytesToRead){
} }
/*--------------------------------------------------------------------*/ /*--------------------------------------------------------------------*/
char *GPIBreadTillTerm(pGPIB self, int devID, int terminator){ char *GPIBreadTillTerm(pGPIB self, int devID, int terminator){
unsigned char buchstabe[2]; char buchstabe[2];
Tcl_DString buffer; Tcl_DString buffer;
char *result = NULL; char *result = NULL;
int status; int status;
@ -59,7 +59,7 @@ void GPIBclear(pGPIB self, int devID){
} }
/*--------------------------------------------------------------------*/ /*--------------------------------------------------------------------*/
void GPIBerrorDescription(pGPIB self, int code, char *buffer, int maxBuf){ void GPIBerrorDescription(pGPIB self, int code, char *buffer, int maxBuf){
return self->getErrorDescription(code, buffer,maxBuf); self->getErrorDescription(code, buffer,maxBuf);
} }
/*------------------------------------------------------------------- /*-------------------------------------------------------------------
These are void implementations of the functions for simulation These are void implementations of the functions for simulation
@ -83,7 +83,7 @@ static int SIMread(int devID, void *buffer, int bytesToRead){
} }
/*--------------------------------------------------------------------*/ /*--------------------------------------------------------------------*/
static int SIMclear(int devID){ static int SIMclear(int devID){
return; return 1;
} }
/*---------------------------------------------------------------------*/ /*---------------------------------------------------------------------*/
static void SIMerror(int code, char *buffer, int maxBuf){ static void SIMerror(int code, char *buffer, int maxBuf){
@ -115,9 +115,12 @@ int GPIBAction(SConnection *pCon, SicsInterp *pSics, void *pData,
Only managers will be allowed to wrestle directly with GPIB Only managers will be allowed to wrestle directly with GPIB
controllers. controllers.
*/ */
if(!SCinMacro(pCon)){
if(!SCMatchRights(pCon,usMugger)){ if(!SCMatchRights(pCon,usMugger)){
return 0; return 0;
} }
}
if(argc > 1){ if(argc > 1){
strtolower(argv[1]); strtolower(argv[1]);

5
histmem.c
View File

@ -310,7 +310,6 @@
{ {
SCWrite(pCon,"ERROR: failed to fix histogram memory problem",eError); SCWrite(pCon,"ERROR: failed to fix histogram memory problem",eError);
SCSetInterrupt(pCon,eAbortBatch); SCSetInterrupt(pCon,eAbortBatch);
SCSetError(pCon,eCt);
return eCt; return eCt;
} }
else else
@ -1068,6 +1067,7 @@ static int checkHMEnd(pHistMem self, char *text){
return 0; return 0;
} }
iRet = SetHistPreset(self,fVal); iRet = SetHistPreset(self,fVal);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -1087,6 +1087,7 @@ static int checkHMEnd(pHistMem self, char *text){
return 0; return 0;
} }
self->iExponent = atoi(argv[2]); self->iExponent = atoi(argv[2]);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -1122,6 +1123,7 @@ static int checkHMEnd(pHistMem self, char *text){
return 0; return 0;
} }
iRet = SetHistCountMode(self,eCount); iRet = SetHistCountMode(self,eCount);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }
@ -1497,6 +1499,7 @@ static int checkHMEnd(pHistMem self, char *text){
} }
genTimeBinning(self->pDriv->data, genTimeBinning(self->pDriv->data,
(float)dStart,(float)dStep,iNum); (float)dStart,(float)dStep,iNum);
SCparChange(pCon);
SCSendOK(pCon); SCSendOK(pCon);
return 1; return 1;
} }

2
hkl.c
View File

@ -985,7 +985,6 @@ ente:
if(SCGetInterrupt(pCon) == eAbortOperation) if(SCGetInterrupt(pCon) == eAbortOperation)
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
SCWrite(pCon,"Driving to HKL Aborted",eStatus); SCWrite(pCon,"Driving to HKL Aborted",eStatus);
} }
return 0; return 0;
@ -1031,7 +1030,6 @@ ente:
if(SCGetInterrupt(pCon) == eAbortOperation) if(SCGetInterrupt(pCon) == eAbortOperation)
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
SCWrite(pCon,"Driving to HKL Aborted",eStatus); SCWrite(pCon,"Driving to HKL Aborted",eStatus);
} }
return 0; return 0;

5
hmdata.c
View File

@ -25,6 +25,7 @@ pHMdata makeHMData(void) {
} }
memset(self,0,sizeof(HMdata)); memset(self,0,sizeof(HMdata));
self->nTimeChan = 1; self->nTimeChan = 1;
self->updateFlag = 1;
return self; return self;
} }
@ -324,6 +325,10 @@ long sumHMDataRectangle(pHistMem hist, SConnection *pCon,
} }
} }
if(self->localBuffer == NULL){
resizeBuffer(self);
}
/* /*
get an update of the HM if necessary get an update of the HM if necessary
*/ */

1
macro.c
View File

@ -458,7 +458,6 @@
else else
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
} }
Tcl_DStringFree(&command); Tcl_DStringFree(&command);
} }

4
motor.c
View File

@ -149,7 +149,6 @@
if(iRet != OKOK) if(iRet != OKOK)
{ {
fVal = -9999999.99; fVal = -9999999.99;
SCSetError(pCon,iRet);
} }
return fVal; return fVal;
} }
@ -546,6 +545,7 @@ extern void KillPiPiezo(void *pData);
iRet = self->pDriver->SetDriverPar(self->pDriver,pCon,name,fVal); iRet = self->pDriver->SetDriverPar(self->pDriver,pCon,name,fVal);
if(iRet == 1) if(iRet == 1)
{ {
SCparChange(pCon);
return iRet; return iRet;
} }
} }
@ -570,6 +570,7 @@ extern void KillPiPiezo(void *pData);
fLimit = ObVal(self->ParArray,SLOW); fLimit = ObVal(self->ParArray,SLOW);
fLimit -= fChange; fLimit -= fChange;
ObParSet(self->ParArray,self->name,"softlowerlim",fLimit,pCon); ObParSet(self->ParArray,self->name,"softlowerlim",fLimit,pCon);
SCparChange(pCon);
return 1; return 1;
} }
@ -591,6 +592,7 @@ extern void KillPiPiezo(void *pData);
ObParInit(self->ParArray,SZERO,"softzero",ZEROINACTIVE,usUser); ObParInit(self->ParArray,SZERO,"softzero",ZEROINACTIVE,usUser);
} }
} }
SCparChange(pCon);
return iRet; return iRet;
} }

57
mumo.c
View File

@ -161,6 +161,7 @@
#define POSFIND 11 #define POSFIND 11
#define NAMALL 12 #define NAMALL 12
#define LIST 13 #define LIST 13
#define DEFPOS 14
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
static int GetNextToken(psParser self, pMulMot pDings) static int GetNextToken(psParser self, pMulMot pDings)
{ {
@ -283,6 +284,11 @@
self->iCurrentToken = LIST; self->iCurrentToken = LIST;
return LIST; return LIST;
} }
else if(strcmp(self->Token,"defpos") ==0)
{
self->iCurrentToken = DEFPOS;
return DEFPOS;
}
else else
{ {
self->iCurrentToken = SYMBOL; self->iCurrentToken = SYMBOL;
@ -625,8 +631,56 @@
} }
return 0; /* not reached */ return 0; /* not reached */
} }
/*-------------------------------------------------------------------------*/
static int ParseDefPos(SicsInterp *pSics,psParser pPP,
pMulMot self, SConnection *pCon)
{
pMotor pMot = NULL;
char pError[132], motorName[80], command[1024], namPos[80];
int iToken, status;
float fVal;
iToken = GetNextToken(pPP,self);
if(iToken != SYMBOL) /* we want a name here */
{
sprintf(pError,"ERROR: Invalid Token %s in ParsePos",pPP->Token);
SCWrite(pCon,pError,eError);
return 0;
}
strncpy(namPos,pPP->Token,79);
iToken = GetNextToken(pPP,self);
command[0] = '\0';
while(iToken != END)
{
if(iToken != ALIAS)
{
sprintf(command,"ERROR: expected motor alias, got: %s", pPP->Token);
SCWrite(pCon,command,eError);
return 0;
}
StringDictGet(self->pAlias,pPP->Token,motorName,79);
strcat(command, motorName);
strcat(command," ");
iToken = GetNextToken(pPP,self);
if(iToken != NUMBER)
{
sprintf(command,"ERROR: expected number, got: %s", pPP->Token);
SCWrite(pCon,command,eError);
return 0;
}
strcat(command,pPP->Token);
strcat(command," ");
iToken = GetNextToken(pPP,self);
}
/* The rest of the stuff should be the motors to drive until
we are there
*/
StringDictAddPair(self->pNamPos,namPos,command);
return 1;
}
/*--------------------------------------------------------------------------- /*---------------------------------------------------------------------------
MultiWrapper is the user interface to a multi motor unit. It supports the MultiWrapper is the user interface to a multi motor unit. It supports the
following syntax, where DingsBums is the name of the unit: following syntax, where DingsBums is the name of the unit:
@ -727,6 +781,9 @@
return 0; return 0;
} }
break; break;
case DEFPOS:
return ParseDefPos(pSics,&MyParser,self,pCon);
break;
case LIST: case LIST:
pPtr = NULL; pPtr = NULL;
Tcl_DStringInit(&tString); Tcl_DStringInit(&tString);

2
mumo.i
View File

@ -7,3 +7,5 @@
pStringDict pNamPos; pStringDict pNamPos;
ObPar *pParam; ObPar *pParam;
} MulMot; } MulMot;

2
nxscript.c
View File

@ -578,7 +578,7 @@ static int handlePut(SConnection *pCon, SicsInterp *pSics, pNXScript self,
defString,buffer); defString,buffer);
if(status != NX_OK){ if(status != NX_OK){
sprintf(buffer,"ERROR: failed to write alias %s", sprintf(buffer,"ERROR: failed to write alias %s",
fVal, argv[2]); argv[2]);
SCWrite(pCon,buffer,eError); SCWrite(pCon,buffer,eError);
} }
return 1; return 1;

2
sans2com.tcl
View File

@ -84,7 +84,7 @@ proc collimator args {
} }
#---------------------------------------------------------------------- #----------------------------------------------------------------------
proc coll args { proc coll args {
return coliimator $args return collimator $args
} }
#======================== Beamstop stuff ============================== #======================== Beamstop stuff ==============================
proc beamstop args { proc beamstop args {

5
scan.c
View File

@ -1869,6 +1869,7 @@ int StoreScanCounts(pScanData self, char *data)
char *pPtr = NULL, pItem[20]; char *pPtr = NULL, pItem[20];
long *lData = NULL; long *lData = NULL;
int i; int i;
writeFunc oldWrite;
self = (pScanData)pEventData; self = (pScanData)pEventData;
pCon = (SConnection *)pUser; pCon = (SConnection *)pUser;
@ -1905,13 +1906,17 @@ int StoreScanCounts(pScanData self, char *data)
/* get counts */ /* get counts */
GetScanCounts(self,lData,self->iNP); GetScanCounts(self,lData,self->iNP);
/* format a message */ /* format a message */
strcpy(pPtr,"scan.Counts= "); strcpy(pPtr,"scan.Counts= ");
for(i = 0; i < self->iNP; i++) for(i = 0; i < self->iNP; i++)
{ {
sprintf(pItem,"{%d} ",lData[i]); sprintf(pItem,"{%d} ",lData[i]);
strcat(pPtr,pItem); strcat(pPtr,pItem);
} }
oldWrite = SCGetWriteFunc(pCon);
SCSetWriteFunc(pCon,SCOnlySockWrite);
SCWrite(pCon,pPtr,eWarning); SCWrite(pCon,pPtr,eWarning);
SCSetWriteFunc(pCon,oldWrite);
free(lData); free(lData);
free(pPtr); free(pPtr);
return 1; return 1;

1
sicscron.c
View File

@ -123,7 +123,6 @@
SCWrite(pCon,"ERROR: out of memory in sicscron",eError); SCWrite(pCon,"ERROR: out of memory in sicscron",eError);
return 0; return 0;
} }
pNew->pCon->iDummy = 1;
pNew->iIntervall = iVal; pNew->iIntervall = iVal;
pNew->pCommand = strdup(pBueffel); pNew->pCommand = strdup(pBueffel);
pNew->tNext = 0; pNew->tNext = 0;

1
sicvar.c
View File

@ -630,6 +630,7 @@
return 0; return 0;
} }
SCSendOK(pCon); SCSendOK(pCon);
SCparChange(pCon);
DeleteTokenList(pList); DeleteTokenList(pList);
return 1; return 1;
} }

2
sinqhm/SinqHM_def.h
View File

@ -23,7 +23,7 @@
#define MAX_CLIENTS 8 /* The maximum number of active clients */ #define MAX_CLIENTS 8 /* The maximum number of active clients */
#define MAX_TOF_CNTR 32768 /* The maximum number of individual counters .. #define MAX_TOF_CNTR 32768 /* The maximum number of individual counters ..
** which can be handled in TOF mode */ ** which can be handled in TOF mode */
#define MAX_PSD_CNTR 1048576 /* maximum number of PSD elements */ #define MAX_PSD_CNTR 16777217 /* maximum number of PSD elements */
#define MAX_PSD_ED 3 /* maximum number of additional #define MAX_PSD_ED 3 /* maximum number of additional
single detectors at AMOR single detectors at AMOR
*/ */

1
slsmagnet.c
View File

@ -13,6 +13,7 @@
#include <time.h> #include <time.h>
#include <math.h> #include <math.h>
#include <assert.h> #include <assert.h>
#include <unistd.h>
#include "fortify.h" #include "fortify.h"
#include "conman.h" #include "conman.h"
#include "servlog.h" #include "servlog.h"

11
status.c
View File

@ -354,6 +354,7 @@ static int motorSave = 0;
int iRights; int iRights;
int iRet; int iRet;
char *pFile = NULL; char *pFile = NULL;
writeFunc oldWrite;
assert(pSics); assert(pSics);
assert(pCon); assert(pCon);
@ -379,8 +380,18 @@ static int motorSave = 0;
iRights = SCGetRights(pCon); iRights = SCGetRights(pCon);
pCon->iUserRights = usInternal; pCon->iUserRights = usInternal;
oldWrite = SCGetWriteFunc(pCon);
SCSetWriteFunc(pCon,SCNotWrite);
iRet = InterpExecute(pSics,pCon,pBueffel); iRet = InterpExecute(pSics,pCon,pBueffel);
SCSetWriteFunc(pCon,oldWrite);
pCon->iUserRights = iRights; pCon->iUserRights = iRights;
/*
if we do not override parameterChange here, the backup file
would be overwritten after each restore... Not the right thing
to do!
*/
pCon->parameterChange = 0;
SCSendOK(pCon);
return iRet; return iRet;
} }

1
tasdrive.c
View File

@ -296,7 +296,6 @@ int TASDrive(SConnection *pCon, SicsInterp *pSics, void *pData,
if(SCGetInterrupt(pCon) == eAbortOperation) if(SCGetInterrupt(pCon) == eAbortOperation)
{ {
SCSetInterrupt(pCon,eContinue); SCSetInterrupt(pCon,eContinue);
SCSetError(pCon,OKOK);
sprintf(pBueffel,"Driving aborted"); sprintf(pBueffel,"Driving aborted");
SCWrite(pCon,pBueffel,eStatus); SCWrite(pCon,pBueffel,eStatus);
} }

5
tasscan.c
View File

@ -963,15 +963,18 @@ static int ParseVar(pTASdata pTAS, char *pBueffel, SConnection *pCon)
{ {
VarSetFloat(pTAS->tasPar[lastVar],atof(pToken), VarSetFloat(pTAS->tasPar[lastVar],atof(pToken),
usInternal); usInternal);
SCparChange(pCon);
} }
else if(vt == veInt) else if(vt == veInt)
{ {
VarSetInt(pTAS->tasPar[lastVar], VarSetInt(pTAS->tasPar[lastVar],
(int)atof(pToken), usInternal); (int)atof(pToken), usInternal);
SCparChange(pCon);
} }
else else
{ {
pTAS->tasPar[lastVar]->text = strdup(pToken); pTAS->tasPar[lastVar]->text = strdup(pToken);
SCparChange(pCon);
} }
lastVar++; lastVar++;
} }
@ -1000,11 +1003,13 @@ static int ParseVar(pTASdata pTAS, char *pBueffel, SConnection *pCon)
{ {
VarSetFloat(pTAS->tasPar[lastVar],atof(pToken), VarSetFloat(pTAS->tasPar[lastVar],atof(pToken),
usInternal); usInternal);
SCparChange(pCon);
} }
else if(vt == veInt) else if(vt == veInt)
{ {
VarSetInt(pTAS->tasPar[lastVar], VarSetInt(pTAS->tasPar[lastVar],
(int)atof(pToken),usInternal); (int)atof(pToken),usInternal);
SCparChange(pCon);
} }
else else
{ {

1
tdchm.c
View File

@ -419,6 +419,7 @@ static int TDCContinue(pHistDriver self, SConnection *pCon){
/*=======================================================================*/ /*=======================================================================*/
static int TDCFree(pHistDriver self){ static int TDCFree(pHistDriver self){
free(self->pPriv); free(self->pPriv);
return 1;
} }
/*======================================================================*/ /*======================================================================*/
static int TDCSetHistogram(pHistDriver self, SConnection *pCon, static int TDCSetHistogram(pHistDriver self, SConnection *pCon,