diff --git a/site_ansto/instrument/sans/util/sics_config.ini b/site_ansto/instrument/sans/util/sics_config.ini
index a83b0624..e4712f48 100644
--- a/site_ansto/instrument/sans/util/sics_config.ini
+++ b/site_ansto/instrument/sans/util/sics_config.ini
@@ -1,8 +1,14 @@
-[sample_stage]
-enabled = Always
-implementation = normal_sample_stage
-name = sample_stage
-optype = motion_axis
+[10_pos_sample_stage]
+desc = "Load the ten position sample changer configuration"
+imptype = motion_axis
+
+[10_position_setup]
+cascade = T1:watlow_rm,sample_stage:10_pos_sample_stage
+enabled = False
+
+[12Tmagnet_setup]
+cascade = B1:12tmagnet_oxford,sample_stage:Oxford_12tmagnet_sample_insert,T1:mercury_scpi_01
+enabled = False
 
 [12tmagnet_oxford]
 desc = "12 Tesla Oxford Magnet"
@@ -11,29 +17,9 @@ imptype = magnetic_field
 ip = 10.157.205.3
 port = 55001
 
-[bruker_bec1]
-desc = "Bruker Magnet"
-driver = "bruker_bec1"
-type = B
-imptype = magnetic_field
-ip = 10.157.205.13
-port = 4444
-
-[rhqc_setup]
-cascade = sample_stage:normal_sample_stage,T1:ls340_01,T2:ls340_02
-enabled = False
-
-[bruker_setup]
-cascade = B1:bruker_bec1,sample_stage:normal_sample_stage,T1:julabo_lh45
-enabled = False
-
-[12Tmagnet_setup]
-cascade = B1:12tmagnet_oxford,sample_stage:Oxford_12tmagnet_sample_insert,T1:mercury_scpi_01
-enabled = False
-
-[10_position_setup]
-cascade = T1:watlow_rm,sample_stage:10_pos_sample_stage
-enabled = False
+[20_pos_sample_stage]
+desc = "Load the twenty position sample changer configuration"
+imptype = motion_axis
 
 [20_position_setup]
 cascade = T1:julabo_lh45,sample_stage:20_pos_sample_stage
@@ -135,6 +121,28 @@ implementation = none
 name = volts2
 optype = multimeter
 
+[bruker_bec1]
+desc = "Bruker Magnet"
+driver = "bruker_bec1"
+imptype = magnetic_field
+ip = 10.157.205.13
+port = 4444
+type = B
+
+[bruker_setup]
+cascade = B1:bruker_bec1,sample_stage:normal_sample_stage,T1:julabo_lh45
+enabled = False
+
+[julabo_lh45]
+ctrl_sensor = "bath"
+desc = "Julabo temperature controller"
+driver = "julabo_lh45"
+imptype = temperature
+ip = 10.157.205.39
+port = 4001
+tol = 5.0
+type = T
+
 [ls336_01]
 desc = "tc1: Lakeshore 336 temperature controller"
 driver = "lakeshore_336"
@@ -242,49 +250,30 @@ valve_tol = 2
 desc = "This is the default sample stage configuration xyz translation omega rotation but no tilt axes"
 imptype = motion_axis
 
-[10_pos_sample_stage]
-desc = "Load the ten position sample changer configuration"
-imptype = motion_axis
-
-[20_pos_sample_stage]
-desc = "Load the twenty position sample changer configuration"
-imptype = motion_axis
-
 [protek_01]
 desc = "Protek Multimeter"
-driver = "protek"
+driver = "protekmm"
 imptype = multimeter
 ip = 10.157.205.36
 port = 4001
 
 [protek_02]
 desc = "Protek Multimeter"
-driver = "protek"
+driver = "protekmm"
 imptype = multimeter
 ip = 10.157.205.37
 port = 4001
 
+[rhqc_setup]
+cascade = sample_stage:normal_sample_stage,T1:ls340_01,T2:ls340_02
+enabled = False
+
 [sample_stage]
 enabled = Always
 implementation = normal_sample_stage
 name = sample_stage
 optype = motion_axis
 
-[west4100]
-desc = "Blue furnace temperature controller"
-driver = "west4100"
-imptype = temperature
-ip = 10.157.205.19
-
-[julabo_lh45]
-desc = "Julabo temperature controller"
-driver = "julabo_lh45"
-imptype = temperature
-ip = ca4-quokka
-port = 4003
-terminator = \r\n
-tol = 0.5
-
 [watlow_rm]
 desc = "Watlow RM temperature controller"
 driver = "watlow_rm"
@@ -293,3 +282,10 @@ ip = 10.157.205.6
 terminator = \r\n
 tol = 0.5
 type = T
+
+[west4100]
+desc = "Blue furnace temperature controller"
+driver = "west4100"
+imptype = temperature
+ip = 10.157.205.19
+