diff --git a/site_ansto/instrument/util/dmc2280/putDMCprog.tcl b/site_ansto/instrument/util/dmc2280/putDMCprog.tcl
index e69de29b..c0502df7 100755
--- a/site_ansto/instrument/util/dmc2280/putDMCprog.tcl
+++ b/site_ansto/instrument/util/dmc2280/putDMCprog.tcl
@@ -0,0 +1,75 @@
+#!/usr/bin/tclsh
+# DMC2280 uses cont-Z (hex 1a) as the EOF char
+# Usage:
+# ./putDMCprog.tcl -host dmcIP -port dmcPort < dmcprog.txt
+# To send the code to the dmc2280 controller at dmcIP and
+# read it from dmcprog.txt, dmcPort should be 1034.
+#
+# Note: Your computer must be on the same NBI vlan as the dmc
+# controller for this to work.  However you can use ssh port
+# forwarding to work remotely.
+#
+# On your computer run the following ssh command,
+# ssh -L 1034:dmcIP:1034 sicsHostIP -lroot
+# Then send the code with
+# ./putDMCprog.tcl -host localhost -port 1034 < dmcprog.txt
+
+global forever
+set line_num 0
+
+# Convert the argument list into a has table
+array set args $argv
+
+if { 0 } {
+  set con4 stdout
+  fconfigure $con4  -buffering line -translation crlf -eofchar \x1a
+} else {
+  # Open the socket to the controller
+  set con4 [socket $args(-host) $args(-port)]
+  # Set up the socket for the controller
+  fconfigure $con4  -buffering none -translation crlf
+}
+
+proc Echo { chan } {
+  global forever
+  global line_num
+
+  if { [eof stdin] } {
+    puts stdout "\\"
+    puts $chan "\\"
+    flush stdout
+    flush $chan
+    after 500
+    set forever done
+    exit
+  } else {
+    set line [gets stdin]
+    if { "$line" != "" } {
+      set line_num [expr $line_num + 1]
+      puts stdout "$line_num: $line"
+      puts $chan $line
+      flush stdout
+      flush $chan
+      after 20
+    }
+  }
+}
+
+# Stop any execution that might interfere with the download
+puts stdout "HX"
+puts $con4 "HX"
+after 50
+# Start the download
+puts stdout "DL"
+puts $con4 "DL"
+after 50
+if { 0 } {
+  fileevent $con4 writable [list Echo $con4]
+  fileevent $con4 readable [list puts [gets $con4]]
+  vwait forever
+} else {
+  while { 1 } {
+    Echo $con4
+  }
+}
+