Make sure spin flipper code in rfamp.c is initialised

Fixed drive bugs in lakeshore drivers.
r3071 | ffr | 2011-02-25 18:27:31 +1100 (Fri, 25 Feb 2011) | 2 lines

site_ansto/instrument/sans/config/INSTCFCOMMON.TXT

@@ -15,7 +15,6 @@ config/nexus/nxscripts_common_1.tcl
 config/commands/commands_common.tcl
 config/motors/sct_positmotor_common.tcl
 config/environment/sct_protek_common.tcl
-config/environment/sct_mcr500_rheometer.tcl
 config/environment/temperature/sct_julabo_lh45.tcl
 config/environment/temperature/sct_lakeshore_340.tcl
 config/environment/temperature/sct_lakeshore_336.tcl

site_ansto/instrument/sans/config/counter/sct_rheometer.tcl

@@ -0,0 +1,81 @@
+## RHEOMETER CONTROL
+
+proc rhCallBack {rootPath} {
+  # if rhSpeed >= trigger then start histmem and pop trigger and time
+  if {[hval $rootPath/runexp] != 1} {
+    return idle
+  }
+  set trigList [hval $rootPath/triggerList]
+  if {$trigList == "EMPTY"} {
+    hset $rootPath/acqTime     "EMPTY"
+    hset $rootPath/runexp 0
+    return idle
+  }
+  set acqTime [hval /sics/rhSpeed/acqTime]
+  if {$acqTime == "EMPTY"} {
+    broadcast "You must set acquisition time"
+    return idle
+  }
+  set rhSpeed [hval $rootPath]
+  set trigLevel [lindex $trigList 0]
+  if {$rhSpeed >= $trigLevel } {
+    set listLen [llength $trigList]
+    if {$listLen > 1} {
+    # If the rhSpeed has jumped over a number of trigger values then skip over those elements in the list
+      for {set tlIndex 1} {$tlIndex < $listLen} {incr tlIndex} {
+        set trigLevel [lindex $trigList $tlIndex]
+        if {$rhSpeed < $trigLevel } {
+          break
+        }
+      }
+    }
+    histmem pause
+    broadcast [info level 0] [hval $rootPath] trigger a [lindex $acqTime 0] second acquisition, sicstime [sicstime]
+    histmem mode time
+    histmem preset [lindex $acqTime 0]
+    histmem start
+    if {$listLen > 1} {
+      # Pop trigger
+      hset $rootPath/triggerList [lrange $trigList $tlIndex end]
+    } else {
+      hset $rootPath/triggerList "EMPTY"
+      hset $rootPath/acqTime     "EMPTY"
+      hset $rootPath/runexp 0
+    }
+    if { $acqTime != "EMPTY"  && [llength $acqTime] > 1} {
+      hset $rootPath/acqTime [lrange $acqTime 1 end]
+    }
+  }
+  return idle
+}
+
+##
+# @brief Pop trigger and acquisition time
+proc rheometer_savehmmdata {rootPath} {
+  set si [hval $rootPath/saveIndex]
+  broadcast [info level 0]: save data index = $si, sicstime [sicstime]
+  save $si
+  if {[hval $rootPath/runexp] == 0} {
+    hset $rootPath/saveIndex 0
+    newfile clear
+  } else {
+    incr si
+    hset $rootPath/saveIndex $si
+  }
+}
+publish rheometer_savehmmdata user
+
+
+proc add_rheo {IP} {
+MakeProtek rhTorque $IP 4002
+MakeProtek rhSpeed  $IP 4001 1.0 0.0 0.5 "rhCallBack /sics/rhSpeed"
+hfactory /sics/rhSpeed/saveIndex plain user int
+hset     /sics/rhSpeed/saveIndex   0
+hfactory /sics/rhSpeed/triggerList plain user text
+hset     /sics/rhSpeed/triggerList "EMPTY"
+hfactory /sics/rhSpeed/acqTime plain user text
+hset     /sics/rhSpeed/acqTime     "EMPTY"
+hfactory /sics/rhSpeed/runexp plain user float
+hset     /sics/rhSpeed/runexp 0
+scriptcallback connect hmm COUNTEND "rheometer_savehmmdata /sics/rhSpeed"
+}

site_ansto/instrument/sans/config/velsel/sct_velsel.tcl

@@ -251,11 +251,6 @@ proc rdPwdAck {} {
     hset $vs_root/status "busy"
     statemon start nvs_speed
     statemon start nvs_lambda
-    if {[sct writestatus] == "start"} {
-    # Called by drive adapter
-      hsetprop $vs_root/setspeed driving 1
-      hsetprop $vs_root/setLambda driving 1
-    }
     return $nextState
   }
 
@@ -305,6 +300,7 @@ proc rdPwdAck {} {
     set state [lindex [hval $statuspath] $paramindex(state) end]
     set aspeed [lindex [hval $statuspath] $paramindex(aspeed) end]
     if {[string match {*CONTROL*} $state] || $aspeed != 0} {
+      sct driving 0
       error "Not allowed while the velocity selector is running"
     }
     return OK
@@ -314,6 +310,7 @@ proc is_Speed_in_blocked_range {speed} {
     variable blocked_speeds
     foreach {min max} $blocked_speeds {
       if {$min <= $speed && $speed <= $max} {
+        sct driving 0
         error "Speed of $speed rpm is within the blocked range of $min to $max rpm"
       }
     }
@@ -358,6 +355,7 @@ proc get_nearest_allowed_speed {speed} {
     set speed [sct target]
     set ttang [lindex [hval $statuspath] $paramindex(ttang) end]
     if {$ttang > 90} { 
+      sct driving 0
 			error "ERROR: You must first initialise the turntable"
     }
 
@@ -372,6 +370,7 @@ proc checkBlockedWavelengths {statuspath} {
     set lambda [sct target]
     set ttang [lindex [hval $statuspath] $paramindex(ttang) end]
     if {$ttang > 90} { 
+      sct driving 0
 			error "ERROR: You must first initialise the turntable"
     }
     set angle [lindex [hval $statuspath] $paramindex(ttang) end]
@@ -424,11 +423,6 @@ proc halt {root} {
     hset $vs_root/status "busy"
     statemon start nvs_speed
     statemon start nvs_lambda
-    if {[sct writestatus] == "start"} {
-    # Called by drive adapter
-      hsetprop $vs_root/setLambda driving 1
-      hsetprop $vs_root/setspeed driving 1
-    }
     return $nextState
   }
 

site_ansto/instrument/sans/quokka_configuration.tcl

@@ -37,7 +37,7 @@ fileeval $cfPath(environment)/temperature/sct_julabo_lh45.tcl
 fileeval $cfPath(environment)/temperature/sct_qlink.tcl
 fileeval $cfPath(environment)/magneticField/sct_oxford_ips.tcl
 fileeval $cfPath(environment)/environment.tcl
-fileeval $cfPath(environment)/sct_mcr500_rheometer.tcl
+fileeval $cfPath(environment)/sct_rheometer.tcl
 fileeval $cfPath(environment)/sct_protek_common.tcl
 fileeval $cfPath(beamline)/spin_flipper.tcl
 source gumxml.tcl