diff --git a/site_ansto/manual/dbSICSch35_oxford_labview.xml b/site_ansto/manual/dbSICSch35_oxford_labview.xml
new file mode 100644
index 00000000..de83dd99
--- /dev/null
+++ b/site_ansto/manual/dbSICSch35_oxford_labview.xml
@@ -0,0 +1,164 @@
+
+
+
+ Oxford 12T Magnet and/or Dilution Controller (via Labview App)
+ Ferdi Franceschini
+
+ 2008-08-29 16:47
+
+
+ Configuration
+ For instrument scientists only
+ At the command line of your ics (instrument control server) computer type
+ runsics stop
+ This stops SICS, in preparation to make configuration changes.
+ configsics
+ This launches an application that will modify the SICS configuration for sample
+ environment. Follow the instructions at the top of the screen
+ Select
+ [x] 12tmagnet:
+ w to write and exit configsics
+ runsics start
+ This will restart SICS with the new sample environment configuration.
+
+
+
+ Commands
+ from sct_oxford_labview.tcl
+
+
+ oxfordsetfield n
+
+ Set the magnetic field to n Tesla
+
+
+
+ oxfordsetrate n
+
+ Set the magnet field ramp rate to n Tesla /
+ minute ??? check units
+
+
+
+ oxfordsethtemp n
+
+ Set the Heliox temperature to n K
+
+
+
+ oxfordsetdtemp n
+
+ Set the Dilution Insert temperature to n
+ K
+
+
+
+ oxfordseths ON/OFF
+
+ Turn the heater switch ON/OFF ???
+
+
+
+
+
+ Parameters
+
+ /sample/magnetic/field ???
+
+
+ /sample/magnetic/magneticFieldCurrent Magnet current (amps)
+
+
+ /sample/magnetic/magneticFieldTesla Magnetic field (Tesla)
+
+
+ /sample/magnetic/start_magnetic Start value for a magnetic field ramp (Tesla)
+
+
+ /sample/magnetic/end_magnetic For a magnetic field ramp, this is the end value (Tesla)
+
+
+ /sample/magnetic/Temp Temperature on main control sensor (K)
+
+
+ /sample/magnetic/Temp_s1 Temperature on sensor 1 (K)
+
+
+ /sample/magnetic/Temp_s2 Temperature on sensor 2 (K)
+
+
+ /sample/magnetic/Temp_s3 Temperature on sensor 3 (K)
+
+
+
+ /sample/magnetic/start_temperature_s1 Start value for a temperature ramp using sensor 1 (K)
+
+
+ /sample/magnetic/end_temperature_s1 End value for a temperature ramp using sensor 1 (K)
+
+
+ /sample/magnetic/start_temperature_s2 Start value for a temperature ramp using sensor 2 (K)
+
+
+ /sample/magnetic/end_temperature_s2 End value for a temperature ramp using sensor 2 (K)
+
+
+ /sample/magnetic/start_temperature_s3 Start value for a temperature ramp using sensor 3 (K)
+
+
+ /sample/magnetic/end_temperature_s3 End value for a temperature ramp using sensor 3 (K)
+
+
+
+
+ /sample/magnetic/fieldSetPoint Setpoint for magnetic field (Tesla)
+
+
+ /sample/magnetic/fieldSetRate Magnetic field rate (Tesla/min)
+
+
+ /sample/magnetic/HelioxTempSetPoint Setpoint for Heliox (K)
+
+
+ /sample/magnetic/HelioxTempReading Temperature reading for Heliox (K)
+
+
+ /sample/magnetic/DilutTempSetPoint Setpoint for Dilution Insert (K)
+
+
+ /sample/magnetic/DilutTempReading Temperature reading for Dilution Insert (K)
+
+
+
+
+ /sample/magnetic/set_rate Magnetic field rate (Tesla/min)
+
+
+ /sample/magnetic/set_magneticField Setpoint for magnetic field (Tesla)
+
+
+ /sample/magnetic/set_DiluxTemp Setpoint for Dilution Insert (K)
+
+
+ /sample/magnetic/set_HelioxTemp Setpoint for Heliox (K)
+
+
+ /sample/magnetic/set_HeaterSwitch Turn heater switch ON and OFF
+
+
+
+
+
+ Description
+ No additional descriptions available at this time.
+
+
+ Known Issues
+ Alerts the user to known operational problems
+
+
+ Troubleshooting
+ What to do if things go wrong
+
+
diff --git a/site_ansto/manual/dbSICSch36_oxford_mercury.xml b/site_ansto/manual/dbSICSch36_oxford_mercury.xml
new file mode 100644
index 00000000..ff1176c6
--- /dev/null
+++ b/site_ansto/manual/dbSICSch36_oxford_mercury.xml
@@ -0,0 +1,99 @@
+
+
+
+ Oxford Mercury Controller
+ Ferdi Franceschini
+
+ 2008-08-29 16:47
+
+
+ Configuration
+ For instrument scientists only
+ At the command line of your ics (instrument control server) computer type
+ runsics stop
+ This stop SICS, in preparation to make configuration changes.
+ configsics
+ This launches an application that will modify the SICS configuration for sample
+ environment. Follow the instructions at the top of the screen
+ Select
+ [x] mercury_scipi:
+ w to write and exit configsics
+ runsics start
+ This will restart SICS with the new sample environment configuration.
+
+
+ Commands
+ No commands at this time
+
+
+ Parameters
+ from sct_oxford_mercury.tcl
+
+
+ /sample/oxford_mercury/Level
+ This is the root node for the cryogen levels
+ Under the Level node are the following commands
+
+
+ HeliumLevel of liquid helium (%)
+
+
+ NitrogenLevel of liquid nitrogen (%)
+
+
+ /sample/oxford_mercury/device_state
+ This provides the state of the device
+
+
+
+ /sample/oxford_mercury/Loop1This is the root node for each Loop.
+ There are 4 loops for the Mercury:
+ Loop1
+ Loop2
+ Loop3
+ Loop4
+ Under each Loop node are the following commands e.g.
+ /sample/oxford_mercury/Loop1/setpoint
+
+
+ setpointSetpoint temperature (K)
+
+
+ sensorsensor reading in K
+
+
+ powerHeater power (W)
+
+
+ nickwhat the loop is labelled on screen (e.g. sampletop)
+
+
+ tempUnder construction. May be deprecated. TEMP structure
+
+
+ loop
+ Under construction. May be deprecated. LOOP structure
+
+
+ heaterUnder construction. May be deprecated. HTR structure
+
+
+
+
+
+ Description
+ No additional descriptions available at this time.
+
+
+ Known Issues
+ Alerts the user to known operational problems
+
+
+ Troubleshooting
+ Check that the Mercury has been set into remote mode using the SCPI protocol. If it
+ still doesn’t talk then the line terminator is probably wrong. Call a SICS developer or
+ try to fix it through trial and error by changing the line terminator in the
+ /usr/local/sics/sics_config.ini file
+
+