diff --git a/site_ansto/instrument/config/commands/hvcommands.tcl b/site_ansto/instrument/config/commands/hvcommands.tcl
index e1b8456c..50da9008 100644
--- a/site_ansto/instrument/config/commands/hvcommands.tcl
+++ b/site_ansto/instrument/config/commands/hvcommands.tcl
@@ -1,5 +1,9 @@
 
-set scaleval 1000.0
+set scaleval 2000.0
+set rampstep 100
+set rampdelay 3
+set motdir 1
+set pulserstate 0
 
 proc SetVoltScale {newscaleval} {
 	global scaleval
@@ -11,17 +15,58 @@ proc VoltScale {involt} {
 	return [expr {($involt*1.0)/$scaleval}]
 }
 
+proc SetRampParms {_rampstep _rampdelay} {
+	global rampstep rampdelay
+	set rampstep $_rampstep
+	set rampdelay $_rampdelay
+}
+
 proc SetVolt {volt} {
+	global pulserstate
 	if {$volt== 0} {
 		PulserOff
+		set pulserstate 0
 	} else {
 		set pulservolt [VoltScale $volt]
-		sct_pulser send "VOLT:OFFS $pulservolt; OFFS?"
-		PulserDC $pulservolt
-		PulserOn
+#	sct_pulser send "VOLT:OFFS $pulservolt; OFFS?"
+#		PulserDC $pulservolt
+		if {$pulserstate==0} {
+			PulserDC $pulservolt
+			PulserOn
+			set pulserstate 1
+		} else {
+			sct_pulser send "VOLT:OFFS $pulservolt; OFFS?"
+			PulserOn
+		}
 	}
 }
 
+proc VoltSetStep {start step fin delay} {
+	set i [expr {$start*1.0}]
+	set loopvar 1
+	SetVolt $i
+	if {($start == $fin) || ($step == 0)} {break}  
+	while {$loopvar} {
+		wait $delay
+		if {($start < $fin)} {
+			set i [expr {$i + abs($step)}]
+			if {$i >= $fin} {
+				set i $fin
+				set loopvar 0
+			}
+		}
+		if {($start > $fin)} {
+			set i [expr {$i - abs($step)}] 
+			if {$i <= $fin} {
+				set i $fin
+				set loopvar 0
+			}
+		}
+		SetVolt $i
+	}
+}
+	
+
 proc GetVolt {} {
 	sct_pulser transact VOLT:OFFS?
 }
@@ -29,25 +74,18 @@ proc GetVolt {} {
 proc SingleVolt {volt oscno} {
 	histmem mode unlimited
 	newfile HISTOGRAM_XY
-	if {$volt== 0} {
-		PulserOff
-	} else {
-		set pulservolt [VoltScale $volt]
-		sct_pulser send "VOLT:OFFS $pulservolt; OFFS?"
-		pulserDC $pulservolt
-		PulserOn
-	}
-	oscmd start $oscno
-	hmm countblock
+	SetVolt $volt
+	oct oscillate_count $oscno
+	oct oscillate start
 	save 0
-	oscmd stop
+
 }
 
 proc SetDC {} {
 	pulseroff
   #NOTE: Setting FUNC DC generates a remote ctrl error if the
   #      burst mode happens to be on
-	set resp [sct_pulser transact "BURS:STAT OFF;:FUNC DC;:VOLT:OFFS 0; OFFS?"]
+	set resp [sct_pulser send "BURS:STAT OFF;:FUNC DC;:VOLT:OFFS 0; OFFS?"]
 	pulseron
 }
 
@@ -61,55 +99,58 @@ proc VoltRamp {start step fin oscno} {
 		set j [expr {$i*$step+$start}]
 		if {$j> $fin && $step > 0} {break}
 		if {$j< $fin && $step < 0} {break}
-		if {$j== 0} {
-			PulserOff
-		} else {
-			set pulservolt [VoltScale $j]
-			pulserDC $pulservolt
-			PulserOn
-		}
-		oscmd start $oscno
-		hmm countblock
+		SetVolt $j
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
-proc VoltTextureRamp {start step fin mot tstart tstep tfin oscno} {
-	histmem mode unlimited
-
-
-	set loopvar 1
+proc SingleVTexScan {mot tstart tstep tfin oscno} {
+   global motdir
+   broadcast in singlevtexscan
+   set loopvar 1
+   set i_bool 0
+   histmem mode unlimited		
+   if {$motdir == 1} {
+	set currentmot $tstart
 	set i 0
-	while {$loopvar} {
-		set j [expr {$i*$step+$start}]
-		if {$j> $fin && $step > 0} {break}
-		if {$j< $fin && $step < 0} {break}
-		if {$j== 0} {
-			PulserOff
-		} else {
-			set pulservolt [VoltScale $j]
-			pulserDC $pulservolt
-			PulserOn
-		}
-		sampledescription voltage $j
-		broadcast voltage $j
-		newfile HISTOGRAM_XY
-		set m 0
-		while {1} {
-			set n [expr {$m*$tstep+$tstart}]
-			if {$n> $tfin && $tstep > 0} {break}
-			if {$n< $tfin && $tstep < 0} {break}
-			drive $mot $n
-			oscmd start $oscno
-			hmm countblock
-			save $m
-			incr m
-		}
-		oscmd stop
-		incr i
-	}
+   } else {
+	set currentmot $tfin
+	set i [expr {int(($tfin-$tstart)/$tstep)}]
+   }		
+   newfile HISTOGRAM_XY
+   while {$i_bool==0} {
+      drive $mot $currentmot
+      oct oscillate_count $oscno
+      oct oscillate start
+      hmm countblock
+      save $i
+      if {($motdir > 0)} {
+
+         set currentmot [expr {$currentmot + $tstep}]
+         if {$currentmot > $tfin} {set i_bool 1}
+         incr i
+      } else {
+         set currentmot [expr {$currentmot - $tstep}]
+         if {$currentmot < $tstart} {set i_bool 1}
+         incr i -1
+      }
+   }
+   set motdir [expr {(-1*$motdir)}]
+}
+	
+proc VListTexScan {voltlist mot tstart tstep tfin oscno} {
+   global rampstep rampdelay 
+  set curvolt [lindex $voltlist 0]
+  broadcast $curvolt
+  SetVolt $curvolt
+  foreach volt $voltlist {
+	broadcast $volt
+	VoltSetStep $curvolt $rampstep $volt $rampdelay
+	SingleVTexScan $mot $tstart $tstep $tfin $oscno
+   }
 }
 
 
@@ -124,12 +165,10 @@ proc SquarePulseTexture {motor start step numsteps volt freq bins oscno} {
 
 	for {set i 0} {$i < $numsteps} {incr i} {
       drive $motor [expr $i*$step+$start]
-      oscmd start $oscno
-      hmm countblock
+      oct oscillate_count $oscno
+      oct oscillate start
       save $i
    }
-
-	oscmd stop
 }
 
 proc UniPulseTexture {motor start step numsteps volt freq bins oscno} {
@@ -144,12 +183,10 @@ proc UniPulseTexture {motor start step numsteps volt freq bins oscno} {
 
 	for {set i 0} {$i < $numsteps} {incr i} {
       		drive $motor [expr $i*$step+$start]
-      		oscmd start $oscno
-      		hmm countblock
+      		oct oscillate_count $oscno
+		oct oscillate start
       		save $i
    	}
-
-	oscmd stop
 }
 
 
@@ -162,8 +199,8 @@ proc BehlkePulseTexture {motor start step numsteps freq bins oscno} {
 	PulserOn
 	for {set i 0} {$i < $numsteps} {incr i} {
 		drive $motor [expr $i*$step+$start]
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 	}
 }
@@ -189,12 +226,11 @@ proc SquarePulseVolt {start step fin freq bins oscno} {
 			PulserOn
 #			sct_pulser send "APPL:SQU $freq,$pulservolt,0"
 		}
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
 proc SquarePulseFreq {volt freqlist bins oscno} {
@@ -209,12 +245,11 @@ proc SquarePulseFreq {volt freqlist bins oscno} {
 		PulserSquare $freq $pulservolt
 		PulserOn
 #		sct_pulser send "APPL:SQU $freq,$pulservolt,0"
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
 proc BehlkePulseFreq {freqlist bins oscno} {
@@ -227,12 +262,11 @@ proc BehlkePulseFreq {freqlist bins oscno} {
 		wait 3
 		PulserSquareOffs $freq 2.5 2.5
 		PulserOn
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
 proc SinePulseFreq {volt freqlist bins oscno} {
@@ -246,12 +280,11 @@ proc SinePulseFreq {volt freqlist bins oscno} {
 		wait 3
 		PulserSin $freq $pulservolt
 		PulserOn
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
 
@@ -271,12 +304,11 @@ proc UniPulseFreq {volt freqlist bins oscno} {
                 PulserSquareOffs $freq $pulservolt $pulseroffs
 		PulserOn
 #		sct_pulser send "APPL:SQU $freq,$pulservolt,[expr {$pulservolt/2}]"
-		oscmd start $oscno
-		hmm countblock
+		oct oscillate_count $oscno
+		oct oscillate start
 		save $i
 		incr i
 	}
-	oscmd stop
 }
 
 proc UniPulseFatigue {volt freq bins oscno reps runs} {
@@ -290,13 +322,14 @@ proc UniPulseFatigue {volt freq bins oscno reps runs} {
 	for {set i 0} {$i<$runs} {incr i} {
 		newfile HISTOGRAM_XYT
 		for {set j 0} {$j<$reps} {incr j} {
-			oscmd start $oscno
-			hmm countblock
+			oct oscillate_count $oscno
+			oct oscillate start
 			save $j
 		}
 		oscmd stop
 	}
 	PulserOff
+	set pulserstate 0
 	Histmem_strobo_off
 
 }
@@ -315,6 +348,7 @@ proc PulserBurst {} {
 		if {[string first 1 $sval] >-1} {break}
 	}
 	PulserOff
+	set pulserstate 0
 
 }
 
@@ -338,6 +372,7 @@ proc VoltPulseRun {vlo vhi freq cycl} {
 	sct_pulser send "BURS:NCYC $prem; NCYC?"
 	PulserBurst
 	PulserOff
+	set pulserstate 0
 	sct_pulser send "BURS:STAT OFF; STAT?"
 
 }
@@ -376,6 +411,7 @@ proc OneTri {volt period} {
 	sct_pulser send "BURS:NCYC 1; NCYC?"
 	PulserBurst
 	PulserOff
+	set pulserstat 0
 }
 
 
@@ -384,6 +420,9 @@ publish GetVolt user
 publish SetDC user
 publish SetVolt user
 publish SetVoltScale user
+publish SingleVTexScan user
+publish VListTexScan user
+publish SetRampParms user
 publish SingleVolt user
 publish VoltRamp user
 publish SquarePulseVolt user
@@ -399,5 +438,6 @@ publish SquarePulseTexture user
 publish BehlkePulseTexture user
 publish BehlkePulseFreq user
 publish UniPulseTexture user
-
+publish VoltSetStep user
+			
 
diff --git a/site_ansto/instrument/config/commands/pulser.tcl b/site_ansto/instrument/config/commands/pulser.tcl
index 99b2ecaf..bef9a102 100644
--- a/site_ansto/instrument/config/commands/pulser.tcl
+++ b/site_ansto/instrument/config/commands/pulser.tcl
@@ -54,7 +54,7 @@ proc PulserSquareOffs {Freq Volt Offs} {
 proc PulserDC {Volt} {
   #NOTE: Setting FUNC DC generates a remote ctrl error if the
   #      burst mode happens to be on
-	set resp [sct_pulser transact "BURS:STAT OFF;:FUNC DC;:VOLT:OFFS $Volt; OFFS?"]
+	set resp [sct_pulser send "BURS:STAT OFF;:FUNC DC;:VOLT:OFFS $Volt; OFFS?"]
 	broadcast $resp
 
 }
diff --git a/site_ansto/instrument/config/counter/counter_common_1.tcl b/site_ansto/instrument/config/counter/counter_common_1.tcl
index 1a16dd32..9ad2782c 100644
--- a/site_ansto/instrument/config/counter/counter_common_1.tcl
+++ b/site_ansto/instrument/config/counter/counter_common_1.tcl
@@ -7,7 +7,6 @@ namespace eval counter {
 
 proc ::counter::transferscript {} {
   variable isc_numchannels
-    bm status
     set val [SplitReply [bm1 gettime]]
     for {set i 1} {$i <= $isc_numchannels}  {incr i} {
       append val " [SplitReply [bm$i getcounts] ]"
diff --git a/site_ansto/instrument/config/environment/temperature/sct_lakeshore_370.tcl b/site_ansto/instrument/config/environment/temperature/sct_lakeshore_370.tcl
index 74233b4a..6fe63945 100644
--- a/site_ansto/instrument/config/environment/temperature/sct_lakeshore_370.tcl
+++ b/site_ansto/instrument/config/environment/temperature/sct_lakeshore_370.tcl
@@ -50,7 +50,7 @@ namespace eval ::scobj::[set vendor]_[set device] {
 
   proc debug_log {debug_level arg_string} {
     # write a timestamped string message to a log file for debugging
-    set debug_threshold 0
+    set debug_threshold 5
     if {$debug_level >= $debug_threshold} {
       set fd [open "[set [namespace current]::log_file]" "a"]
       set line "[clock format [clock seconds] -format "%T"] $arg_string"
diff --git a/site_ansto/instrument/config/environment/temperature/sct_lakeshore_m370.tcl b/site_ansto/instrument/config/environment/temperature/sct_lakeshore_m370.tcl
index 401527b9..8e6e7de7 100644
--- a/site_ansto/instrument/config/environment/temperature/sct_lakeshore_m370.tcl
+++ b/site_ansto/instrument/config/environment/temperature/sct_lakeshore_m370.tcl
@@ -32,7 +32,7 @@ proc ::scobj::lakeshore_m370::mkDriver { sct_controller name device_class simula
   set ns "[namespace current]"
   set catch_status [ catch {
 
-    MakeSICSObj ${name} SCT_OBJECT user float
+    MakeSICSObj ${name} SCT_OBJECT user none
 
     sicslist setatt ${name} klass ${device_class}
     sicslist setatt ${name} long_name ${name}
@@ -43,8 +43,8 @@ proc ::scobj::lakeshore_m370::mkDriver { sct_controller name device_class simula
     hsetprop ${scobj_hpath} debug_threshold 5
 # mkDriver hook code starts
     ::scobj::lakeshore_370::mk_sct_driver $sct_controller environment $name $tol
-    hsetprop ${scobj_hpath}/setpoint permlink data_set T[format "%02d" ${id}]SP01
-    hsetprop ${scobj_hpath}/setpoint @description T[format "%02d" ${id}]SP01
+    hsetprop ${scobj_hpath}/Loop1/setpoint permlink data_set T[format "%02d" ${id}]SP01
+    hsetprop ${scobj_hpath}/Loop1/setpoint @description T[format "%02d" ${id}]SP01
     hsetprop ${scobj_hpath}/Sensor/value permlink data_set T[format "%02d" ${id}]S01
     hsetprop ${scobj_hpath}/Sensor/value @description T[format "%02d" ${id}]S01
 # mkDriver hook code ends
diff --git a/site_ansto/instrument/config/environment/temperature/sct_oxford_mercury.tcl b/site_ansto/instrument/config/environment/temperature/sct_oxford_mercury.tcl
index 22ebad6b..67266192 100644
--- a/site_ansto/instrument/config/environment/temperature/sct_oxford_mercury.tcl
+++ b/site_ansto/instrument/config/environment/temperature/sct_oxford_mercury.tcl
@@ -58,7 +58,7 @@ namespace eval ::scobj::[set vendor]_[set device] {
 
   proc debug_log {debug_level arg_string} {
     # write a timestamped string message to a log file for debugging
-    set debug_threshold 0
+    set debug_threshold 5
     if {$debug_level >= $debug_threshold} {
       set fd [open "[set [namespace current]::log_file]" "a"]
       set line "[clock format [clock seconds] -format "%T"] $arg_string"
diff --git a/site_ansto/instrument/config/environment/temperature/west400.tcl b/site_ansto/instrument/config/environment/temperature/west400.tcl
index 586247a3..71945a84 100644
--- a/site_ansto/instrument/config/environment/temperature/west400.tcl
+++ b/site_ansto/instrument/config/environment/temperature/west400.tcl
@@ -20,10 +20,12 @@ MakeRS232Controller sertemp $IP 502
 sertemp timeout 300
 sertemp sendterminator 0x0
 sertemp replyterminator 0x0
-EvFactory new tc1 west4100 sertemp $ID 2
+#ffr 2014-09-22: The modbus addr should be 1 for single port moxas (Not $ID which is a SICS ID)
+# EvFactory new tc1 west4100 sertemp $ID 2
+EvFactory new $temp_sobj west4100 sertemp 1 2
 
-sicslist setatt tc1 units kelvin
-sicslist setatt tc1 klass @none
+sicslist setatt $temp_sobj units kelvin
+sicslist setatt $temp_sobj klass @none
 }
 
 # @brief Adds a west400  temperature controller object.
diff --git a/site_ansto/instrument/hipd/config/commands/commands.tcl b/site_ansto/instrument/hipd/config/commands/commands.tcl
index 75bd42d8..0eb6d3bc 100644
--- a/site_ansto/instrument/hipd/config/commands/commands.tcl
+++ b/site_ansto/instrument/hipd/config/commands/commands.tcl
@@ -6,7 +6,7 @@ namespace eval motor {
 }
 
 namespace eval ajscmds {
-namespace export SetRadColl SimpleRun SimpleScan RadCollRun RadCollTimed RadCollScan
+namespace export SetRadColl SimpleRun SimpleScan RadCollRun RadCollTimed RadCollScan RadCollBiScan
 
 # SetRadColl
 command SetRadColl {
@@ -34,13 +34,13 @@ catch {
 } msg
 clientput $msg
 }
+
 # SimpleRun
 command SimpleRun {
 float=0:inf steptime
 int=1:inf numsteps
 } {
 
-#   RadCollOff
    histmem mode time
    histmem preset $steptime
    newfile HISTOGRAM_XY
@@ -49,6 +49,7 @@ int=1:inf numsteps
       save $i
    }
 }
+
 # SimpleScan
 command SimpleScan {
 text=drivable motor
@@ -58,7 +59,6 @@ int=1:inf numsteps
 float=0:inf steptime
 } {
 
-#  RadCollOff
    histmem mode time
    histmem preset $steptime
    newfile HISTOGRAM_XY
@@ -68,13 +68,13 @@ float=0:inf steptime
       save $i
    }
 }
+
 # RadCollRun
 command RadCollRun {
 int=1:inf oscno
 int=1:inf reps
 } {
 
-#   RadCollOn $oscno
    histmem mode unlimited
    newfile HISTOGRAM_XY
    for {set i 0} {$i < $reps} {incr i} {
@@ -83,8 +83,8 @@ int=1:inf reps
  	hmm countblock
       	save $i
    }
-#  RadCollOff
 }
+
 # RadCollTimed
 command RadCollTimed {
 int=1:inf oscno
@@ -99,14 +99,16 @@ float=0:inf time
    set i 0
    set timsecs [expr $time*60]
    while {$bool == 0} {
+        oct oscillate_count $oscno
+        oct oscillate start
  	histmem start block
 	save $i
 	incr i
 	set tim2 [expr [clock seconds] - $tim1]
         if {$tim2 > $timsecs} {set bool 1}
    }
-   RadCollOff
 }
+
 # RadCollScan
 command RadCollScan {
 text=drivable motor
@@ -115,8 +117,6 @@ float step
 int=1:inf numsteps
 int=1:inf oscno
 } {
-
-#  RadCollOn $oscno
    histmem mode unlimited
    newfile HISTOGRAM_XY
    for {set i 0} {$i < $numsteps} {incr i} {
@@ -126,8 +126,12 @@ int=1:inf oscno
       hmm countblock
       save $i
    }
-#  RadCollOff
 }
+
+
+
+
+
 }
 namespace import ::ajscmds::*
 publish SetRadColl user
@@ -140,3 +144,86 @@ publish RadCollScan user
 proc ::commands::isc_initialize {} {
   ::commands::ic_initialize
 }
+
+
+# RadCollScanRange
+proc RadCollScanRange {motor start step fin oscno} {
+   if {$step==0} {break}
+   if {($start > $fin) && ($step > 0)} {break}
+   if {($start < $fin) && ($step < 0)} {break}
+   set i_bool 0
+   histmem mode unlimited
+   set currentmot $start
+   set i 0
+   newfile HISTOGRAM_XY
+   while {$i_bool==0} {
+      drive $motor $currentmot
+      $motor send SH`
+      oct oscillate_count $oscno
+      oct oscillate start
+      hmm countblock
+
+      set currentmot [expr {$currentmot + $step}]
+      if {($step > 0) && ($currentmot > $fin)} {set i_bool 1}
+      if {($step < 0) && ($currentmot < $fin)} {set i_bool 1}
+      if {($i_bool == 0)} {run $motor $currentmot}
+      save $i
+      incr i
+   }
+}
+
+publish RadCollScanRange user
+
+#RadCollScanBi
+proc RadCollScanBi {motor start step fin oscno motdir} {
+
+   set i_bool 0
+   set spx -12500
+   set spstep [expr {$spx * $step * $motdir}]
+  histmem stop
+  histmem mode unlimited
+
+   if {$motdir == 1} {
+      set currentmot $start
+      set i 0
+   } else {
+      set currentmot $fin
+      set i [expr {int(($fin-$start)/$step)}]
+   }
+   drive $motor $currentmot
+   newfile HISTOGRAM_XY
+
+   while {$i_bool==0} {
+      oct oscillate_count $oscno
+      oct oscillate start
+      hmm countblock
+
+      if {($motdir > 0)} {
+	 set currentmot [expr {$currentmot + $step}]
+	 if {$currentmot > $fin} {set i_bool 1}
+
+      } else {
+        set currentmot [expr {$currentmot - $step}]
+        if {$currentmot < $start} {set i_bool 1}
+
+      }
+
+     if {($i_bool == 0)} {run $motor $currentmot}
+     save $i
+     if {($motdir > 0)} {incr i 1} else {incr i -1}
+
+#      if {($i_bool == 0)} {
+#	$motor send SH`
+#  	$motor send PR` $spstep
+#	$motor send BG`
+#
+#      }
+#     save $i
+   }
+}
+
+publish RadCollScanBi user
+
+
+
+
diff --git a/site_ansto/instrument/hipd/config/commands/eulerscan.tcl b/site_ansto/instrument/hipd/config/commands/eulerscan.tcl
index 45b0724b..41f0c9a3 100644
--- a/site_ansto/instrument/hipd/config/commands/eulerscan.tcl
+++ b/site_ansto/instrument/hipd/config/commands/eulerscan.tcl
@@ -1,7 +1,22 @@
 # Euler cradle scan commands for texture runs
 # AJS Dec 2010
 
+proc EulerScan {mstart mstep mend oscno} {
+	ephi speed 5
+	ephi accel 5
+	ephi decel 5
+	echi speed 2
+	set motdir 1
+	drive echi 0 ephi $mstart
+	foreach chival {0 15 30 45 60 75 90} {
+		drive echi $chival
+		RadCollScanBi ephi $mstart $mstep $mend $oscno $motdir	
+		set motdir [expr {$motdir * -1}]
+	}
+	drive echi 0 ephi $mstart
+}
 
+publish EulerScan user
 
 # continous scan for EPHI- the euler cradle phi stage (innermost axis)
 # note make sure controller 2 has the PHISCAN code in it
diff --git a/site_ansto/instrument/hipd/config/hmm/hmm_configuration.tcl b/site_ansto/instrument/hipd/config/hmm/hmm_configuration.tcl
index 47087171..58300baa 100644
--- a/site_ansto/instrument/hipd/config/hmm/hmm_configuration.tcl
+++ b/site_ansto/instrument/hipd/config/hmm/hmm_configuration.tcl
@@ -28,7 +28,7 @@ proc ::histogram_memory::init_OAT_TABLE {args} {
       hmm configure fat_frame_source INTERNAL
 
 
- #     set resolution "double_x"
+#      set resolution "double_x"
 
       switch $resolution {
       "hires" {
diff --git a/site_ansto/instrument/hipd/config/hmm/hmm_rapid.tcl b/site_ansto/instrument/hipd/config/hmm/hmm_rapid.tcl
index fd7c040f..d8b6931f 100644
--- a/site_ansto/instrument/hipd/config/hmm/hmm_rapid.tcl
+++ b/site_ansto/instrument/hipd/config/hmm/hmm_rapid.tcl
@@ -148,7 +148,7 @@ proc SetHistoOneShot {frq framenum } {
         bat_table -set NO_REPEAT_ENTRY 1 NO_REPEAT_TABLE 1 NO_EXECUTE_TABLE 1 PERIOD_INDICES { 0 1 }
         fat_table -set NOS_PERIODS $framenum
         oat_table -set T {0 2200000} NTC 1
-	oat_table -set Y {-0.5 15.5} NYC 16
+	oat_table -set Y {-0.5 31.5} NYC 16
 	histmem freq $frq
 
         histmem loadconf
@@ -160,4 +160,22 @@ proc SetHistoOneShot {frq framenum } {
 
 publish SetHistoOneShot user
 
+proc SetHistoStd {} {
+	histmem stop
+	hmm astop
+        FAT_TABLE -set MULTI_HOST_HISTO_STITCH_OVERLAP 8  MULTI_HOST_HISTO_JOIN_STITCH_ORDER INVERTED
+        OAT_TABLE -set X { 991.5 987.5 } NXC 248 Y { -0.5 3.5 } NYC 128 T { 0 20000 } NTC 1
+	histmem loadconf
+}
 
+publish SetHistoStd user
+
+proc SetHistoDX {} {
+        histmem stop
+        hmm astop
+        FAT_TABLE -set MULTI_HOST_HISTO_STITCH_OVERLAP 16  MULTI_HOST_HISTO_JOIN_STITCH_ORDER INVERTED
+        OAT_TABLE -set X { 991.5 989.5 } NXC 496 Y { -0.5 3.5 } NYC 128 T { 0 20000 } NTC 1
+	histmem loadconf
+}
+
+publish SetHistoDX user
diff --git a/site_ansto/instrument/hipd/config/motors/euler_configuration.tcl b/site_ansto/instrument/hipd/config/motors/euler_configuration.tcl
index cb4b340e..4d59dad1 100644
--- a/site_ansto/instrument/hipd/config/motors/euler_configuration.tcl
+++ b/site_ansto/instrument/hipd/config/motors/euler_configuration.tcl
@@ -56,20 +56,20 @@ Motor ephi $motor_driver_type [params \
   asyncqueue mc2\
   axis C\
   units degrees\
-  hardlowerlim -185\
-  hardupperlim 185\
+  hardlowerlim -365\
+  hardupperlim 365\
   maxSpeed 5\
   maxAccel 5\
-  maxDecel 1\
+  maxDecel 5\
   stepsPerX -12500\
   absEnc 1\
   absEncHome $ephi_Home\
   cntsPerX -4096]
-setHomeandRange -motor ephi -home 0 -lowrange 180 -uprange 180
-ephi softlowerlim -180
-ephi softupperlim 180
+setHomeandRange -motor ephi -home 0 -lowrange -360 -uprange 360
+ephi softlowerlim -360
+ephi softupperlim 360
 ephi home 0
-ephi speed 1
+ephi speed 3
 ephi movecount $move_count
 ephi precision 0.01
 ephi part sample
diff --git a/site_ansto/instrument/hipd/config/motors/motor_configuration.tcl b/site_ansto/instrument/hipd/config/motors/motor_configuration.tcl
index e3953a9f..837972bc 100644
--- a/site_ansto/instrument/hipd/config/motors/motor_configuration.tcl
+++ b/site_ansto/instrument/hipd/config/motors/motor_configuration.tcl
@@ -24,8 +24,9 @@ if {$sim_mode == "true"} {
 #set mx_Home 23263535
 set mx_Home 8390583
 #set mom_Home 9274794
-#set mom_Home 8391038
-set mom_Home 8147038
+##set mom_Home 8391038
+#set mom_Home 8147038
+set mom_Home 7979102 
 set mtth_Home 19927837
 #set mphi_Home 7613516
 #set mphi_Home 27847793
@@ -33,6 +34,7 @@ set mphi_Home 8384818
 #set mchi_Home 9050090
 #set mchi_Home 25561619
 set mchi_Home 8389526
+#set mchi_Home 6847710
 #set my_Home 6767221
 set my_Home 8378212
 set som_Home 17214054
@@ -342,7 +344,7 @@ Motor $sample_stage_rotate $motor_driver_type [params \
   asyncqueue mc2\
   axis E\
   units degrees\
-  hardlowerlim -71\
+  hardlowerlim -121\
   hardupperlim 116\
   maxSpeed 5\
   maxAccel 3\
@@ -362,8 +364,10 @@ Motor stth $motor_driver_type [params \
   asyncqueue mc2\
   axis F\
   units degrees\
-  hardlowerlim 15.8\
+  hardlowerlim 13\
   hardupperlim 29.7\
+  softlowerlim 13.4\
+  softupperlim 29.6\
   maxSpeed 0.5\
   maxAccel 0.1\
   maxDecel 0.1\
@@ -373,7 +377,7 @@ Motor stth $motor_driver_type [params \
   bias_bits 25\
   bias_bias 932070\
   cntsPerX -93207]
-stth softlowerlim 15.9
+stth softlowerlim 13.4
 stth softupperlim 29.6
 stth home 28.481113
 #stth home 18.981113
@@ -413,28 +417,34 @@ oct long_name oct
 ############################
 #
 
-# Monochromator Focusing (HOPG)
-#Motor mf1 $motor_driver_type [params \
-#  asyncqueue mc3\
-#  axis A\
-#  units degrees\
-#  hardlowerlim xxxx\
-#  hardupperlim xxxx\
-#  maxSpeed xxxx\
-#  maxAccel xxxx\
-#  maxDecel xxxx\
-#  stepsPerX xxxx\
-#  absEnc 1\
-#  absEncHome $mf1_Home\
-#  cntsPerX xxxx]
-#setHomeandRange -motor mf1 -home 0 -lowrange 0 -uprange 360
-#mf1 speed 1
-#mf1 movecount $move_count
-#mf1 precision 0.01
-#mf1 part monochromator
-#mf1 long_name mf1
+set mf_config 1
 
+
+switch $mf_config {
+   1 {
+# Monochromator Focusing (HOPG)
+       Motor mf1 $motor_driver_type [params \
+         asyncqueue mc3\
+         axis A\
+         units degrees\
+         hardlowerlim -0.1\
+         hardupperlim 1.1\
+         maxSpeed 0.1\
+         maxAccel 0.1\
+         maxDecel 0.1\
+         stepsPerX 22000\
+         absEnc 1\
+         absEncHome 3965\
+         cntsPerX -3500]
+       setHomeandRange -motor mf1 -home 0 -lowrange 0 -uprange 1
+       mf1 speed 0.02
+#       mf1 movecount $move_count
+       mf1 precision 0.005
+       mf1 part monochromator
+       mf1 long_name mf1
+      }
 # Monochromator Focusing (Ge)
+
 ## ffr 31/7/2012
 ## absEncHome was found to be 16777217 on 31/7/2012 when the
 ## encoder clocked over to 114 counts to give a posn
@@ -443,26 +453,32 @@ oct long_name oct
 ## and has a 24bit range (ie max cnt=16777216)
 ## I set a bias of 10000 counts with absenchome = 10000
 ## so that SICS can drive the axis to the allowed limits.
-Motor mf2 $motor_driver_type [params \
-  asyncqueue mc3\
-  axis A\
-  units degrees\
-  hardlowerlim -2\
-  hardupperlim 2\
-  maxSpeed 0.1\
-  maxAccel 0.1\
-  maxDecel 0.1\
-  stepsPerX 22000\
-  absEnc 1\
-  absEncHome 42768\
-  bias_bits 24\
-  bias_bias 10000\
-  cntsPerX -3500]
-setHomeandRange -motor mf2 -home 0 -lowrange 0 -uprange 2
-mf2 speed 0.02
-mf2 precision 0.005
-mf2 part monochromator
-mf2 long_name mf2
+
+   2 {
+
+      Motor mf2 $motor_driver_type [params \
+        asyncqueue mc3\
+        axis A\
+        units degrees\
+        hardlowerlim -0.1\
+        hardupperlim 1.1\
+        maxSpeed 0.1\
+        maxAccel 0.1\
+        maxDecel 0.1\
+        stepsPerX 22000\
+        absEnc 1\
+        absEncHome 10000\
+        bias_bits 24\
+        bias_bias 10000\
+        cntsPerX -3500]
+      setHomeandRange -motor mf2 -home 0 -lowrange 0 -uprange 1
+      mf2 speed 0.02
+      mf2 precision 0.005
+      mf2 part monochromator
+      mf2 long_name mf2
+   }
+}
+
 
 # Slit 1, right
 Motor ss1r $motor_driver_type [params \
diff --git a/site_ansto/instrument/hipd/config/motors/tilt_configuration.tcl b/site_ansto/instrument/hipd/config/motors/tilt_configuration.tcl
index f4d77b6e..6681b7a6 100644
--- a/site_ansto/instrument/hipd/config/motors/tilt_configuration.tcl
+++ b/site_ansto/instrument/hipd/config/motors/tilt_configuration.tcl
@@ -1,7 +1,8 @@
 # This must be loaded by motor_configuration.tcl
 
 set sphi_Home 7938520
-set schi_Home 7586052
+#set schi_Home 7586052
+set schi_Home 9932404 
 set sy_Home 7790194
 set sx_Home 7556649
 
diff --git a/site_ansto/instrument/hipd/util/sics_config.ini b/site_ansto/instrument/hipd/util/sics_config.ini
index ab40aac9..e67afd1d 100644
--- a/site_ansto/instrument/hipd/util/sics_config.ini
+++ b/site_ansto/instrument/hipd/util/sics_config.ini
@@ -104,7 +104,7 @@ name = sample_stage
 optype = motion_axis
 [12tmagnet_oxford]
 desc = "12 Tesla Oxford Magnet"
-driver = "oxford_labview"
+driver = "oxford12tlv"
 imptype = magnetic_field
 ip = 10.157.205.3
 port = 55001
@@ -294,37 +294,17 @@ imptype = motion_axis
 asyncqueue = sct
 desc = "VF1 Blue furnace temperature controller"
 dev_id = 1
-driver = "west4100"
-imptype = temperature
-ip = 10.157.205.24
-port = 502
-
-[vf1_west6100]
-asyncprotocol = modbus_ap
-desc = "VF1 Blue furnace 6100 temperature controller"
-dev_id = 1
 driver = "west_6100"
 imptype = temperature
 ip = 10.157.205.24
 port = 502
-timeout = 2000
 
 [vf2_west4100]
 asyncqueue = sct
 desc = "VF2 Blue furnace temperature controller"
 dev_id = 1
-driver = "west4100"
-imptype = temperature
-ip = 10.157.205.25
-port = 502
-
-[vf2_west6100]
-asyncprotocol = modbus_ap
-desc = "VF2 Blue furnace 6100 temperature controller"
-dev_id = 1
 driver = "west_6100"
 imptype = temperature
 ip = 10.157.205.25
 port = 502
-timeout = 2000
 
diff --git a/site_ansto/instrument/hipd/wombat_configuration.tcl b/site_ansto/instrument/hipd/wombat_configuration.tcl
index e92da140..27c735d4 100644
--- a/site_ansto/instrument/hipd/wombat_configuration.tcl
+++ b/site_ansto/instrument/hipd/wombat_configuration.tcl
@@ -29,8 +29,9 @@ fileeval $cfPath(environment)/sct_agilent_33220A.tcl
 fileeval $cfPath(environment)/sct_hiden_xcs.tcl
 fileeval $cfPath(environment)/sct_huber_pilot.tcl
 fileeval $cfPath(environment)/sct_isotech_ps.tcl
-fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
-fileeval $cfPath(environment)/temperature/sct_eurotherm_m2000.tcl
+#fileeval $cfPath(environment)/temperature/sct_eurotherm_2000.tcl
+#fileeval $cfPath(environment)/temperature/sct_eurotherm_m2000.tcl
+fileeval $cfPath(environment)/temperature/eurotherm_3200_sct.tcl
 fileeval $cfPath(environment)/sct_keithley_2700.tcl
 fileeval $cfPath(environment)/sct_keithley_m2700.tcl
 fileeval $cfPath(environment)/temperature/sct_lakeshore_218.tcl
@@ -52,6 +53,7 @@ fileeval $cfPath(environment)/temperature/sct_julabo_lh45_gen.tcl
 fileeval $cfPath(environment)/temperature/sct_qlink.tcl
 fileeval $cfPath(environment)/temperature/west400.tcl
 fileeval $cfPath(environment)/temperature/sct_west4100.tcl
+fileeval $cfPath(environment)/temperature/sct_west_6100.tcl
 fileeval $cfPath(environment)/magneticField/sct_oxford_labview.tcl
 fileeval $cfPath(environment)/magneticField/sct_oxford12tlv.tcl
 fileeval $cfPath(environment)/he3/sct_he3.tcl
@@ -65,13 +67,16 @@ fileeval $cfPath(commands)/pulser.tcl
 fileeval $cfPath(commands)/hvcommands.tcl
 fileeval $cfPath(commands)/vactex.tcl
 fileeval $cfPath(commands)/eulerscan.tcl
+fileeval $cfPath(commands)/cfcommands.tcl
 fileeval $cfPath(anticollider)/anticollider.tcl
+fileeval $cfPath(beamline)/sct_he3_polanal.tcl
 fileeval $cfPath(hmm)/hmm_rapid.tcl
 source gumxml.tcl
 
 # Wombat only change to hvcommands' scaleval variable
 SetVoltScale 2000.0
 
+
 # The Alice Thing
 # Qlink : 9600, 8 data, 1 stop, No Parity, None Flow
 # LS340 : 9600, 7 data, 1 stop, Odd Parity, None Flow