- Updated the managers documentation a little

- The  crystal settings calculation in hkl now tried to put omega into
  the limts by calculating a delta omega.
- TRICS data files now include HKL and the UB
- The scan module has been expanded to support user defined scans which
  run a script at any scan point.
- A small fix to the PSD code in SinqHM_srv_filler

doc/user/trics.htm

@@ -6,25 +6,26 @@
 <H1>The Four Circle Diffractometer TRICS</H1>
 <P>
 <h2>Introduction</h2>
-The four circle diffractometer TRICS is used for the study of crystal structures
+The four circle diffractometer TRICS is used for the study of dynamic 
+and magentic  structures
  by neutron diffraction at single crystals. TRICS can be operated in two
 modes: 1.) with a single counter very much like a traditional four circle
 diffractometer and  2.) with three position sensitive detectors operating
-like a oscillation camera as used by protein crystallographers. The second
-option has not yet been implemented due to the unavailability of suitable
-detectors and electronics. This manual describes the operation of TRICS
+like a oscillation camera as used by protein crystallographers. 
+This manual describes the operation of TRICS
 using the SICS software. 
 </P>
 <p>
-TRICS is situated at one of the beamlines for hot neutrons at the spallation
-source SINQ at PSI, Switzerland. The incident beam first hits a
-monochromator crystal. The selected wavelength is in principle fixed. A
+TRICS is situated at one of the beamlines for thermal neutrons at the
+spallation source SINQ at PSI, Switzerland. The incident white neutron
+beam first hits a
+monochromator crystal. The selected wavelength is not variable. A
 monochromator lift with two monochromators and the possiblity to select
-different reflections for diffraction at the monochromator however make it
+different reflections peaks however make it
 possible to select between a few different neutron wavelength. The sample is
 held in a standard eulerian cradle with the usual angles omega, chi and phi. 
-Up to three position sensitive detectors are held on a detector holder at
-different angles in two theta. Or a single detector is fixed to this setup.
+Up to three position sensitive detectors are held on detector holders at
+different angles in gamma and nu. Or a single detector is fixed to this setup.
 The three position sensitive detectors may be moved up and down on a sphere
 around the sample. This allows to access different lattice planes when the
 eulerian cradle has been replaced by some cryostat or other sample

doc/user/tricsman

@@ -18,7 +18,7 @@
 \begin{huge}
 TRICS--Reference Manual \\
 \end{huge}
-Version April, 2000\\
+Version July, 2001\\
 Dr. Mark K\"onnecke \\
 Labor f\"ur Neutronenstreuung\\
 Paul Scherrer Institut\\