move a lot of stuff to git

compress_logger/compress.py

@@ -110,7 +110,7 @@ def treat(action, instrument='', years='past', vars=None):
                 if os.path.isfile(gzdir + variable + '.gz'):
                     expand(logdir, gzdir, variable)
                 else:
-                    print '%s is missing' % (gzdir + variable + '.gz')
+                    print(gzdir + variable + '.gz', 'is missing')
 
 if __name__ == '__main__':
     action = COMPRESS
@@ -125,6 +125,8 @@ if __name__ == '__main__':
             cleanup = False
         elif opt == '-c':
             cleanup = False
+        elif opt == '-n':
+            action = None
         elif opt == '-i':
             addto = instruments
         elif opt == '-p':
@@ -164,10 +166,10 @@ if __name__ == '__main__':
     print("years: %s" % repr(years))
     print("vars: %s" % ", ".join(vars))
     for instrument in instruments:
-        print(instdir(instrument))
+        print('instrument:', instdir(instrument))
         if cleanup:
             for pat in removedirs:
-                print pat
+                print('remove', pat)
                 gap = 0
                 t0 = time.time()
                 t1 = t0
@@ -182,4 +184,5 @@ if __name__ == '__main__':
                         gap += 1
                     time.sleep(min(1.0, now - t1)) # be nice
                     t1 = now
+        if action:
             treat(action, instrument, years, vars)

duout.py

@@ -1,10 +0,0 @@
-# create du.out with (for example)
-#
-#  du -cd 1 logger/2016 > du.out
-
-with open('du.out') as f:
-    duout = [line.split(None,1) for line in f.read().split('\n')]
-    while len(duout[-1]) != 2:
-        duout = duout[:-1]
-    for size, file in sorted([(int(size), file) for size, file in duout]):
-	print(size, file)

tcl/ah2550.addon

@@ -0,0 +1,10 @@
+addonDesc = Andeen Hagerlin 2550 Capacitance Bridge 
+makenv cap -driver ah2550
+
+
+makenv capslope -driver slope /cap/cap
+GraphAdd cap.cap pF Cap blue
+GraphAdd cap.loss tand Loss blue
+
+GraphAdd capslope pF/min capslope blue
+

tcl/altcur.job

@@ -0,0 +1,8 @@
+set ival 0.5
+
+while {$ival<3 } {
+  cs iset $ival
+  wait 21
+  cs iset -$ival
+  wait 21
+}

tcl/coil2.stick

@@ -0,0 +1,7 @@
+stickDesc = coil reading (channel D)
+
+stick_sensors undefined coil
+
+catch {
+  eval "[hgetpropval /lnv switchgraph] 1"
+}

tcl/dilcal.addon

@@ -0,0 +1,65 @@
+addonDesc = ULT calibration setup
+
+# LakeShore 372 Thermometers 1-6
+
+makenv res1 -driver 372_lsc -port dilsc-ls2.psi.ch:7777 {
+
+lsc_sensor rx1 1 -sensor U08127 -excitation 20uV -filter 10
+lsc_sensor rx2 2 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx3 3 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx4 4 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx5 5 -sensor raw -excitation 20uV -filter 10
+#lsc_sensor rx6 6 -sensor raw -excitation 20uV -filter 10
+
+# heater output 0 (=sample heater) for channel 4 (still)
+ lsc_loop set -loop 0 -channel 1 -maxheater 100mA -resist 100
+
+}
+
+# LakeShore 372 Thermometers 7-13
+
+makenv res2 -driver 372_lsc -port linse-se1-ls.psi.ch:7777 {
+
+lsc_sensor rx7 1 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx8 2 -sensor x165053 -excitation 20uV -filter 10
+lsc_sensor rx9 3 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx10 4 -sensor raw -excitation 20uV -filter 10
+lsc_sensor rx13 5 -sensor raw -excitation 20uV -filter 10
+
+# heater output 0 (=sample heater) for channel 4 (still)
+lsc_loop set -loop 0 -channel 1 -maxheater 0.5W -resist 15
+
+}
+
+# Stuff for calibrations with fixed point device
+
+#defineTemperature tmix
+
+makenv cmn -driver cmnnanov -port ldmse-d910-ts.psi.ch:3001
+
+GraphAdd cmn.u1 V cmn
+GraphAdd cmn.u2 V fixp
+
+makenv softloop -driver piloop -invar "/cmn/temp" -outvar "res2 set/manualpower" \
+  -inpfunc 1 -outfunc 1 -outlinear 1e-7 -precision 1e-15 -outmin 1e-11 -outmax 0.1
+
+GraphAdd cmn.temp K
+GraphAdd softloop.reg K cmn_reg
+GraphAdd softloop.target K cmn_target
+GraphAdd res2.rx8 K T_rx8
+
+GraphAdd res1.rx1.raw Ohm
+GraphAdd res1.rx2.raw Ohm
+GraphAdd res1.rx3.raw Ohm
+GraphAdd res1.rx4.raw Ohm
+GraphAdd res1.rx5.raw Ohm
+#GraphAdd res1.rx6.raw Ohm
+
+GraphAdd res2.rx7.raw Ohm
+GraphAdd res2.rx8.raw Ohm
+GraphAdd res2.rx9.raw Ohm
+GraphAdd res2.rx10.raw Ohm
+#GraphAdd res2.rx11.raw Ohm
+#GraphAdd res2.rx12.raw Ohm
+GraphAdd res2.rx13.raw Ohm
+

tcl/dilscf.config

@@ -0,0 +1,6 @@
+deviceDesc = DILSC through Frappy
+
+set ::secop_version 4
+
+makenv frappy -driver secop -port dilsc:5000
+

tcl/drivers/sdvm.tcl

@@ -0,0 +1,51 @@
+# software dvm
+
+
+namespace eval sdvm {
+}
+
+if {![namespace exists trun]} {
+  source drivers/trun.tcl
+}
+
+proc stdConfig::sdvm args {
+  variable name
+  variable path
+  variable node
+  
+  scanargs $args var -invar -outvar
+
+# custinp, custout:
+#   custom input / output function
+#   log: allow choice between linear and logarithmic
+#   none: only linear
+#   else: a custom function. the last arguments are either
+#      <value>                  forward conversion
+#      inv <value>              inverted conversion
+
+  variable hostport none
+  controller dumprot
+
+  }
+
+  obj dvm -upd out
+  prop lastinput 0
+  prop custinp $custinp1
+  prop custinp $custinp2
+
+  kids "$title settings" {
+    node dctime par $dctime
+    prop help {time held at one polarity [sec]}
+
+    node current par $current
+    prop help {set current in A}
+
+    node invar -text out
+    default 0
+    prop check piloop::setinvar
+    prop write stdSct::completeUpdate
+    prop visible false
+    
+    node outvar -text par $outvar
+    prop visible false
+    

tcl/drivers/srsbga244.tcl

@@ -0,0 +1,30 @@
+namespace eval srsbga244 {} {
+}
+
+proc stdConfig::srsbga244 {} {
+  controller std "" 5 
+  prop read srsbga244::read
+  prop update srsbga244::update
+
+  obj He3 rd
+  prop cmd RATO?1%
+  kids He3 {
+    # node prx rd -text
+    # prop cmd PRX
+
+    node press rd 
+    prop cmd PRES?bar
+
+  }
+}
+
+proc srsbga244::read {} {
+  sct send "[sct cmd]\r\n"
+  return update
+}
+
+proc srsbga244::update {} {
+    sct update [sct result]
+    return idle
+}
+

tcl/dryrex.config

@@ -0,0 +1,64 @@
+deviceDesc = dry system
+
+if {"[sicsdescriptor t]" != "notfound"} {
+clientput [listexe]
+  stopexe t
+clientput success
+  success
+clientput "removeobject t"
+  removeobject t
+}
+
+# --- configuration script
+config listen 1
+
+# create the device
+# change X77456 for X154360 when calibration exists
+
+## Configuration for attocube testing:
+#makenv tt -driver [lsdriver] {
+#  lsc_sensor tm A -sensor X71741 -sensorname top
+#  lsc_sensor ts B -sensor X68433 -sensorname bottom  
+#  lsc_sensor tc C -sensor X154360 -sensorname middle
+#  lsc_loop set -loop 1 -channel B -maxheater 25W -resist 25Ohm
+#}
+
+# Configuration for braid thermal conductivity measurements:
+makenv tt -driver [lsdriver] {
+  lsc_sensor ts B -sensor X154360 -sensorname stage2  
+  lsc_loop set -loop 1 -channel B -maxheater 25W -loopname braid -resist 50Ohm
+}
+
+tt set/limit 315
+tt set/prop 15
+tt set/integ 10
+catch {
+  enableTable 0
+}
+
+
+ makenv tx -driver 370_lsc {
+  lsc_sensor S1 -channel 1 -sensor ruox002
+  lsc_sensor S2 -channel 3 -sensor ruox001
+  #please set sample Thermpmeter to the real calib
+  GraphAdd tx.S1 K S1 yellow
+  GraphAdd tx.S2 K S2 cyan
+}
+
+
+
+# --- compressor ---
+makenv cp2800 cp2800
+
+GraphAdd cp2800.inp_water_t C InpWater_C red
+GraphAdd cp2800.out_water_t C OutWater_C blue
+GraphAdd cp2800.oil_t       C Oil_C      green
+GraphAdd cp2800.helium_t    C Helium_C   magenta
+
+GraphAdd cp2800.high_side_p_min psi High_psi_min red
+GraphAdd cp2800.high_side_p_max psi High_psi_max orange
+GraphAdd cp2800.low_side_p_min psi Low_psi_min green
+GraphAdd cp2800.low_side_p_max psi Low_psi_max dark_green
+
+
+

tcl/fitest.config

@@ -0,0 +1,55 @@
+deviceDesc = FI control (new FI control from valentin)
+
+makenv tt -driver fictrl -port ldm-fi-ts:3001 {
+  voltscale 17.8
+  min_resist 0.02
+  max_resist 0.05
+  current_offset -1.11
+  voltage_offset 0.05
+}
+
+defineTemperature tt
+
+#GraphAdd tt.t1 K T1
+#GraphAdd tt.t2 K T2
+#GraphAdd tt.t3 K T3
+GraphAdd tt.t4 K T4
+GraphAdd tt.target K T_set
+#GraphAdd tt.t1.raw mV V1
+#GraphAdd tt.t2.raw mV V2
+#GraphAdd tt.t3.raw mV V3
+GraphAdd tt.t4.raw mV V4
+GraphAdd tt.tref K_2
+GraphAdd tt.tout K_2
+GraphAdd tt.power W power
+GraphAdd tt.htr % htr
+GraphAdd tt.resist Ohm resist
+GraphAdd pv mbar p_vac
+GraphAdd tt.s1 i s1
+GraphAdd tt.s2 i s2
+GraphAdd tt.s3 i s2
+GraphAdd tt.s4 i s2
+#GraphAdd tt.cool i cool
+
+GraphAdd tt.slope K/min
+GraphAdd tt.sramp K/min
+#GraphAdd tt.powerset W
+#GraphAdd tt.powerprop W
+GraphAdd tt.maxpower W
+
+tt t1/curve type-c
+tt t2/curve type-c
+tt t3/curve type-k
+tt t4/curve type-k
+tt ctrlchan 4
+tt ramp 99
+
+makenv pv -driver pfeiffertpg -port ldm-fi-ts:3002
+
+makenv table -driver table /tt/t1 {
+  "tt smooth" "300:500 400:160 500:120 700:60 1000:30"
+  "tt prop" "300:6 500:3 700:1.5 1000:1"
+  "tt int" "300:40 500:20 700:10 1000:10"
+  "tt maxpower" "300:150 500:200 1000:500 1400:2000 1800:3000"
+}
+

tcl/flowsas.config

@@ -0,0 +1,8 @@
+deviceDesc = flowsas
+
+set ::secop_version 4
+
+makenv secop -driver secop
+#debug _secop
+
+#dolater 0 _secop poll /secop 1 read test

tcl/frappy.addon

@@ -0,0 +1,6 @@
+addonDesc = FRAPPY history recorder for addons
+
+set ::secop_version 4
+
+set nr [string range $serverport end-1 end]
+makenv frappy_main -driver secop -port [frappy_port addons]

tcl/frappy.stick

@@ -0,0 +1,5 @@
+stickDesc = FRAPPY history recorder for stick
+
+set ::secop_version 4
+
+makenv frappy_main -driver secop -port [frappy_port stick]

tcl/heatramp.job

@@ -0,0 +1,18 @@
+hola reset
+
+proc measure { T } {
+  clientput set heater to $T W
+  tt setsamp/manualpower $T
+  wait 3600
+  clientput DONE!
+}
+
+wait 3600
+hola file "20240912_thermalcond.dat"
+hola command measure
+hola vars tt res.s1 res.s2 res.s3 res.s4 res.s5 tt.setsamp/power
+hola measpars 600 tt res.s1 res.s2 res.s3 res.s4 res.s5 tt.setsamp/power
+hola open tt res.s1 res.s2 res.s3 res.s4 res.s5 tt.setsamp/power
+hola do  0.0 0.012 0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2 0.225 0.25 0.275 0.3 0.325 0.35 0.375 0.4 0.425 0.45 0.475 0.5 0.0
+
+

tcl/iv.addon

@@ -0,0 +1,8 @@
+addonDesc = k2601b current source and k2182a voltmeter
+
+makenv cs -driver k2601b
+makenv vm -driver nanov
+
+GraphAdd vm.u1 V Voltage
+GraphAdd cs.iset A Current
+

tcl/ls372flamedil.addon

@@ -0,0 +1,7 @@
+addonDesc = additional LakeShore 372
+
+makenv ts -driver 372_lsc -port flamedil-ls.psi.ch:7777 {
+  lsc_sensor t2 1 -sensor rx198 -excitation 20uV -filter 1
+  lsc_sensor ts 3 -sensor cx198 -excitation 20uV -filter 1
+}
+

tcl/ls372sc.addon

@@ -0,0 +1,16 @@
+addonDesc = additional LakeShore 372
+
+#-sensor abs: converted value will be absolute value (-sensor raw does respect sign)
+
+makenv ls_dilsc -driver 372_lsc -port dilsc-ls2.psi.ch:7777 {
+  lsc_sensor plato 7 -sensor QT2-PS1_RuO -excitation 20uV -filter 1 -dwell 3 
+  #lsc_sensor chip 2 -sensor 2023-BC1_2 -excitation 20uV -filter 1 -dwell 3
+  #lsc_sensor chip 8 -sensor 2024-BC1-V2 -excitation 20uV -filter 1 -dwell 3 
+  #lsc_loop heater_plato -loop 0 -channel 1 -maxheater 10mA -resist 320 -loopname plato
+  #lsc_sensor plato 8 -sensor U08910 -excitation 20uV -filter 1 -dwell 3
+  lsc_sensor puck A -sensor U08127 -excitation 20uV -filter 1 -dwell 3 
+  lsc_loop heater_plato -loop 0 -channel A -maxheater 10mA -resist 84 -loopname plato
+}
+
+GraphAdd ls_dilsc.plato.raw Ohm T_plato.raw 
+GraphAdd ls_dilsc.chip.raw Ohm T_chip.raw

tcl/ma10b.config

@@ -0,0 +1,41 @@
+deviceDesc = MA10 + FRAPPY history recorder for magfield
+
+set ::secop_version 4
+
+set ins [result instrument]
+if {[string match "prep*" $ins]} {
+  set nr [string range $ins end end]
+} else {
+  error "runs on prep0-9 only"
+}
+makenv frappy_main -driver secop -port localhost:1511$nr
+makeHePump
+deviceDesc = 10 Tesla vertical cryomagnet
+
+defineTemperature tt
+device stick_menu "ma10 dil2 dil3 dil4 heliox oven2 coil"
+
+makenv tt -driver [lsdriver] {
+  lsc_sensor tm A -sensor x112386 -sensorname VTI
+  lsc_sensor ts C -sensorname sample
+  lsc_sensor ts_2 D  -sensor code -sensorname sample2
+  lsc_loop set -loop 1 -channel A -maxheater 32W -resist 80Ohm -color green
+  if {[lsdriver] eq "336_lsc"} {
+    lsc_loop setsamp -loop 2 -channel C -maxheater 62.5W -resist 20Ohm -color dark_green
+  }
+}
+tt set/limit 310
+
+makeCCU4 ma10 nv_release_blocked
+hupdate /nv/set 1.8
+
+# increase motor current
+cc mc 75
+
+makenv table -driver table /tt/tm {
+  "tt set/prop" "50:50 300:20"
+  "tt set/integ" "10:50 50:20 300:5"
+  "tt dblctrl/int2" "2:10 20:50 50:300 120:500 300:800"
+  "tt dblctrl/prop_up" "20:0.1 50:0.4"
+  "tt dblctrl/prop_lo" "20:0.1 50:0.8"
+}

tcl/ma6_sampleheat.stick

@@ -1,3 +1,3 @@
-\stickDesc = MA6 stick with heater and pt-1000 sensor
+stickDesc = MA6 stick with heater and pt-1000 sensor
 
 stick_sensors x63161 pt-1000

tcl/pestick.stick

@@ -0,0 +1,13 @@
+stickDesc = PE stick via Frappy / for MB11 / VarioxB
+
+set ::secop_version 4
+
+set ins [result instrument]
+if {[string match "prep*" $ins]} {
+  set nr [string range $ins end end]
+  makenv frappy_stick -driver secop -port localhost:1521$nr
+} elseif {[lindex [split [info hostname] .] 0] ne $ins} {
+  error "runs on instruments or prep0-9 only"
+} else {
+  makenv frappy_stick -driver secop -port localhost:15201
+}

tcl/ppms_frappy2.config

@@ -0,0 +1,11 @@
+deviceDesc = PPMS FRAPPY history recorder, with stick
+
+set ::secop_version 4
+
+makenv frappy_main -driver secop -port pc12694:5000
+makenv frappy_stick -driver secop -port localhost:15201
+#makenv frappy_addons -driver secop -port localhost:15301
+#debug _secop
+
+#dolater 0 _secop poll /secop 1 read test
+

tcl/rrr.job

@@ -0,0 +1,50 @@
+set Tmax 300
+set Tmin 4.0
+set Tramp 5
+set Imax 1.0
+
+proc measres {iset dv} {
+  cs iset $iset
+  wait 15
+  set Vpos [result vm u1]
+  cs iset -$iset
+  wait 15
+  set Vneg [result vm u1]
+  set res [expr ($Vpos - $Vneg) / (2. * $iset)]
+  set inew [expr $dv/ ($Vpos - $Vneg) * $iset]
+  return [list $res $inew]
+}
+
+
+tt set/ramp $Tramp
+set iset 1.0
+set resistance 0
+set rhigh 0
+set rlow 1
+cs Enable 1
+
+while {[result tt] > [expr $Tmin * 1.1] | [result tt] < $Tmax } {
+  set test [measres $iset 1E-7]
+  set resistance [lindex $test 0]
+  set iset [format "%.3f" [lindex $test 1]]
+  if {$iset > $Imax} {
+    set iset $Imax
+  }
+
+  clientput [result tt] ${resistance}
+
+  if {[result tt] > 290} {
+    set rhigh $resistance
+    set thigh [result tt]
+  }
+
+  if {[result tt] < 6.0} {
+    set rlow $resistance
+    set tlow [result tt]
+  }
+}
+
+clientput resistance at ${thigh} K : ${rhigh} Ohm
+clientput resistance at ${tlow} K : ${rlow} Ohm
+clientput RRR : [ expr $rhigh / $rlow ]
+

tcl/srrr.job

@@ -0,0 +1,28 @@
+
+proc measres {iset dv} {
+  cs iset $iset
+  wait 15
+  set Vpos [result vm u1]
+  cs iset -$iset
+  wait 15
+  set Vneg [result vm u1]
+  set res [expr ($Vpos - $Vneg) / (2. * $iset)]
+  set inew [expr $dv/ ($Vpos - $Vneg) * $iset]
+  return [list $res $inew]
+}
+
+
+set iset 1.0
+set resistance 0
+cs Enable 1
+
+while {0 < 1 } {
+  set test [measres $iset 1E-7]
+  set resistance [lindex $test 0]
+  set iset [format "%.3f" [lindex $test 1]]
+  if {$iset > 1.0} {
+    set iset 1.0
+  }
+
+  clientput ${resistance} Ohm
+}

tcl/srsbga244.addon

@@ -0,0 +1,7 @@
+addonDesc = SRS binary gas analyser 244 RS232
+
+makenv bga -driver srsbga244 -port ldmprep12-ts:3004
+
+GraphAdd bga % He3 blue
+GraphAdd bga.press bar bga 
+

tcl/test_vf.config

@@ -0,0 +1,13 @@
+deviceDesc = test ILL furnace with iono pi max
+
+set ::secop_version 4
+
+makenv secop -driver secop
+
+makenv hvac -driver pfeiffertpg
+
+makenv softloop -driver piloop -invar "/t" -outvar "htr target" \
+  -inpfunc 0 -outfunc 0 -outlinear 1e-9 -precision 1e-10 -outmin 0 -outmax 30 -int 100 -prop 200
+
+
+GraphAdd hvac mbar hvac blue

tcl/tramp.job

@@ -0,0 +1,15 @@
+hola reset
+
+proc measure { T } {
+  clientput set T to $T
+  drive tt $T
+  clientput DONE!
+}
+
+hola file "20230706_CCR2ht.dat"
+hola command measure
+hola vars tt tm te tk tt.set/power
+hola measpars 90 tt tm te tk tt.set/power
+hola open tt tm te tk tt.set/power
+hola do 480 steps -20 40
+

tcl/uzhstick_v2.config

@@ -0,0 +1,29 @@
+\deviceDesc = UZH_pulsed_magnet_chamber
+
+#defineTemperature cf
+
+#makenv cf -driver itcm -port lollypop-ts.psi.ch:3001
+
+makenv tt -driver 336_lsc {
+  lsc_sensor tm A -sensor X131175 -sensorname magnet
+#  lsc_sensor ts B -sensor x148906 -sensorname sample
+#  lsc_sensor ts C -sensor X148903 -sensorname sample 
+#lsc_loop set -loop 1 -channel A -maxheater 60W -resist 40Ohm -color green
+}
+
+#tt set/prop 25
+#tt set/integ 20
+#tt dblctrl/int2 100
+
+#makeCCU4 lollyp he nv
+#cc hav 1
+#cc hea 1
+
+#nv ctrl/adjust_minpulse 0 
+#nv ctrl/openpulse 0
+#nv ctrl/prop_o 0.5
+#nv ctrl/prop_c 0.5
+
+#hupdate /hepump 3
+#hepump calib 1
+#dolater 1 hepump 3

tcl/varioxb_sea.config

@@ -0,0 +1,58 @@
+deviceDesc = 100mm Variox
+
+device stick_menu "mb11 dil5 varioxb_sea"
+
+defineTemperature tvs
+
+makenv tvs -driver itctemp -port linvb-ts:3001 -controller _tt DB6.T1 DB1.H1
+GraphAdd tvs K T_VTIs red
+GraphAdd tvs.set K T_stat_set orange
+GraphAdd tvs.pow W pow_tvs red
+#GraphAdd tvs.raw Ohm R_tvs red
+
+makenv tvd -driver itctemp -port linvb-ts:3001 -controller _tt DB7.T1 DB2.H1
+GraphAdd tvd K T_VTId magenta
+GraphAdd tvd.set K T_dyn_set violet
+GraphAdd tvd.pow W pow_tvd magenta
+#GraphAdd tvd.raw Ohm R_tvd magenta
+
+makenv pstat -driver itcpress -port linvb-ts:3001 -controller _tt DB5.P1 DB3.G1
+GraphAdd pstat mbar p_stat
+GraphAdd pstat.pos % nv_stat
+GraphAdd pstat.set mbar p_stat_set
+
+makenv pdyn -driver itcpress -port linvb-ts:3001 -controller _tt DB8.P1 DB4.G1
+GraphAdd pdyn mbar p_dyn
+GraphAdd pdyn.pos % nv_dyn
+GraphAdd pdyn.set mbar p_dyn_set
+
+makeIpsLev -port linvb-ts:3002 -controller _ta -slot DB4
+
+makenv tneck1 -driver itctemp -port linvb-ts:3002 -controller _ta MB1.T1 MB0.H1
+makenv tneck2 -driver itctemp -port linvb-ts:3002 -controller _ta DB6.T1 DB1.H1
+makenv tnvs -driver itctemp -port linvb-ts:3002 -controller _ta DB7.T1 DB2.H1
+makenv tnvd -driver itctemp -port lnivb-ts:3002 -controller _ta DB8.T1 DB3.H1
+
+makeN2Fill ccu4ilm {
+  ln2fill lowlevel 30
+  ln2fill highlevel 95
+  ln2fill minfillminutes 8
+  ln2fill maxfillminutes 40
+  ln2fill minholdhours 24
+  ln2fill maxholdhours 96
+#  appendVars ln2fill.smooth/%/N2smooth/13
+}
+
+
+GraphAdd tneck1 K_2 T_neck1
+GraphAdd tneck1.pow W pow_neck1
+GraphAdd tneck2 K_2 T_neck2
+GraphAdd tneck2.pow W pow_neck2
+GraphAdd tnvs K_2 T_nvs
+#GraphAdd tnvs.pow W pow_nvs
+GraphAdd tnvd K_2 T_nvd
+#GraphAdd tnvd.pow W pow_nvd
+
+
+setstickrot linvb-ts:3004
+

tcl/varioxb_sea.stick

@@ -0,0 +1,9 @@
+stickDesc = stick for Variox B
+
+defineTemperature ts
+
+makenv ts -driver itctemp -port linvb-ts:3001 -controller _tt MB1.T1 MB0.H1
+GraphAdd ts K T_sam blue
+GraphAdd ts.set K T_sam_set cyan
+GraphAdd ts.pow W pow_ts blue
+GraphAdd ts.raw Ohm R_ts blue