From 7e4db015d475ac047b1c14d40d7fb552696dcb23 Mon Sep 17 00:00:00 2001
From: Markus Zolliker <markus.zolliker@psi.ch>
Date: Wed, 27 May 2026 07:57:17 +0200
Subject: [PATCH] dryrex: state as of 2026-05-27

---
 tcl/dry.config    | 55 +++++++++++++++++++++++++++--------------------
 tcl/dryrex.config | 41 ++++++++++++++++++++---------------
 2 files changed, 56 insertions(+), 40 deletions(-)

diff --git a/tcl/dry.config b/tcl/dry.config
index 56dd46e..40e8692 100644
--- a/tcl/dry.config
+++ b/tcl/dry.config
@@ -23,15 +23,24 @@ config listen 1
 #  lsc_loop set -loop 1 -channel B -maxheater 25W -resist 25Ohm
 #}
 
-# Configuration for braid thermal conductivity measurements:
+# Configuration for squid testing:
 makenv tt -driver [lsdriver] {
-  lsc_sensor CR2 A -sensor X148903 -sensorname CR2
-  #lsc_sensor ts B -sensor X68433 -sensorname platform  
-  lsc_sensor SR2 C -sensor X148906 -sensorname SR2
-  lsc_sensor CZ2 D -sensor X142474 -sensorname CZ2	
-  lsc_loop set -loop 1 -channel C -maxheater 25W -loopname braid -resist 81Ohm
+  lsc_sensor tm B -sensor X154360 -sensorname coldhead
+  lsc_sensor ts A -sensor X219231 -sensorname sample  
+#  lsc_sensor SR2 C -sensor X148906 -sensorname SR2
+#  lsc_sensor CZ2 D -sensor X142474 -sensorname CZ2	
+  lsc_looxp set -loop 1 -channel B -maxheater 25W -loopname coldhead -resist 81Ohm
 }
 
+# Configuration for braid thermal conductivity measurements:
+#makenv tt -driver [lsdriver] {
+#  lsc_sensor CR2 A -sensor X148903 -sensorname CR2
+#  #lsc_sensor ts B -sensor X68433 -sensorname platform  
+#  lsc_sensor SR2 C -sensor X148906 -sensorname SR2
+#  lsc_sensor CZ2 D -sensor X142474 -sensorname CZ2	
+#  lsc_loop set -loop 1 -channel C -maxheater 25W -loopname braid -resist 81Ohm
+#}
+
 tt set/limit 315
 tt set/prop 15
 tt set/integ 10
@@ -40,15 +49,15 @@ catch {
 }
 
 # Add second LakeShore (LS336)
-makenv ttb -driver 336_lsc -port lollypop-ls:7777 {
+#makenv ttb -driver 336_lsc -port lollypop-ls:7777 {
   # Choose which brad is connecter and change the corresponding thermomemter calibration (copy from the top LakeShore 340)
-  lsc_sensor PLAT A -sensor X68433 -sensorname platform
-  lsc_loop set -loop 1 -channel A -maxheater 25W -resist 25Ohm -loopname platform -color green
-}
+#  lsc_sensor PLAT A -sensor X68433 -sensorname platform
+#  lsc_loop set -loop 1 -channel A -maxheater 25W -resist 25Ohm -loopname platform -color green
+#}
 
-ttb set/prop 25
-ttb set/integ 20
-ttb dblctrl/int2 100
+#ttb set/prop 25
+#ttb set/integ 20
+#ttb dblctrl/int2 100
 
 
 
@@ -56,19 +65,19 @@ if {0} {
 
 # lakeshore 370
 
- makenv tx -driver 370_lsc {
-  lsc_sensor Exhaust 1 pt1000e
+# makenv tx -driver 370_lsc {
+#  lsc_sensor Exhaust 1 pt1000e
 #  lsc_sensor Shield1top 2 pt1000e
-  lsc_sensor Shield1bot 3 pt1000e
-  lsc_sensor VTI 4 x68433
-  lsc_sensor Sample 7 x75610
+#  lsc_sensor Shield1bot 3 pt1000e
+#  lsc_sensor VTI 4 x68433
+#  lsc_sensor Sample 7 x75610
   #please set sample Thermpmeter to the real calib
-  GraphAdd tx.Exhaust K Stage2PT yellow
+#  GraphAdd tx.Exhaust K Stage2PT yellow
 #  GraphAdd tx.Shield1top K Shield1_top orange
-  GraphAdd tx.Shield1bot K Shield1_bot cyan
-  GraphAdd tx.VTI K VTI_HX orange
-  GraphAdd tx.Sample K Sample_T black
- }
+#  GraphAdd tx.Shield1bot K Shield1_bot cyan
+#  GraphAdd tx.VTI K VTI_HX orange
+#  GraphAdd tx.Sample K Sample_T black
+# }
 
 }
 #debug tx
diff --git a/tcl/dryrex.config b/tcl/dryrex.config
index ba83dfd..f5319d7 100644
--- a/tcl/dryrex.config
+++ b/tcl/dryrex.config
@@ -16,7 +16,7 @@ config listen 1
 # change X77456 for X154360 when calibration exists
 
 ## Configuration for attocube testing:
-#makenv tt -driver [lsdriver] {
+#makenv tt -driver [lsdriver] { #Lakeshore340 configuration for Rio
 #  lsc_sensor tm A -sensor X71741 -sensorname top
 #  lsc_sensor ts B -sensor X68433 -sensorname bottom  
 #  lsc_sensor tc C -sensor X154360 -sensorname middle
@@ -24,25 +24,30 @@ config listen 1
 #}
 
 # Configuration for braid thermal conductivity measurements:
-makenv tt -driver [lsdriver] {
-  lsc_sensor ts B -sensor X154360 -sensorname stage2  
-  lsc_loop set -loop 1 -channel B -maxheater 25W -loopname braid -resist 50Ohm
-}
+#makenv tt -driver [lsdriver] {
+#  lsc_sensor tm B -sensor X154360 -sensorname stage2  
+#  lsc_sensor ts A -sensor X219231 -sensorname sample  
+#  lsc_loop set2 -loop 1 -channel B -maxheater 23W -loopname stage2 -resist 25Ohm
+#  lsc_loop set -loop 2 -channel A -maxheater 1W -loopname sample -resist 130Ohm
+#}
 
-tt set/limit 315
-tt set/prop 15
-tt set/integ 10
-catch {
-  enableTable 0
-}
+#catch {
+#  tt set/limit 315
+#}
+#tt set/prop 10
+#tt set/integ 200
+#catch {
+#  enableTable 0
+#}
 
 
- makenv tx -driver 370_lsc {
-  lsc_sensor S1 -channel 1 -sensor ruox002
-  lsc_sensor S2 -channel 3 -sensor ruox001
-  #please set sample Thermpmeter to the real calib
-  GraphAdd tx.S1 K S1 yellow
-  GraphAdd tx.S2 K S2 cyan
+makenv tx -driver 370_lsc {
+  lsc_sensor c1 -channel 1 -sensor X219231
+  lsc_sensor c5 -channel 5 -sensor X154360
+  lsc_loop set -channel 1 -maxheater 100mA -resist 130
+#please set sample Thermpmeter to the real calib
+#  GraphAdd tx.S1 K S1 yellow
+#  GraphAdd tx.S2 K S2 cyan
 }
 
 
@@ -61,4 +66,6 @@ GraphAdd cp2800.low_side_p_min psi Low_psi_min green
 GraphAdd cp2800.low_side_p_max psi Low_psi_max dark_green
 
 
+makenv p -driver pfeiffertpg -port ldmse3-ts:3016
+GraphAdd p mbar Vacuum