initial commit

tcl/dry.config

@@ -0,0 +1,130 @@
+deviceDesc = dry system
+
+if {"[sicsdescriptor t]" != "notfound"} {
+clientput [listexe]
+  stopexe t
+clientput success
+  success
+clientput "removeobject t"
+  removeobject t
+}
+
+# --- configuration script
+config listen 1
+
+# create the device
+# change X77456 for X154360 when calibration exists
+
+## Configuration for attocube testing:
+#makenv tt -driver [lsdriver] {
+#  lsc_sensor tm A -sensor X71741 -sensorname top
+#  lsc_sensor ts B -sensor X68433 -sensorname bottom  
+#  lsc_sensor tc C -sensor X154360 -sensorname middle
+#  lsc_loop set -loop 1 -channel B -maxheater 25W -resist 25Ohm
+#}
+
+# Configuration for braid thermal conductivity measurements:
+makenv tt -driver [lsdriver] {
+  lsc_sensor CR2 A -sensor X148903 -sensorname CR2
+  #lsc_sensor ts B -sensor X68433 -sensorname platform  
+  lsc_sensor SR2 C -sensor X148906 -sensorname SR2
+  lsc_sensor CZ2 D -sensor X142474 -sensorname CZ2	
+  lsc_loop set -loop 1 -channel C -maxheater 25W -loopname braid -resist 81Ohm
+}
+
+tt set/limit 315
+tt set/prop 15
+tt set/integ 10
+catch {
+  enableTable 0
+}
+
+# Add second LakeShore (LS336)
+makenv ttb -driver 336_lsc -port lollypop-ls:7777 {
+  # Choose which brad is connecter and change the corresponding thermomemter calibration (copy from the top LakeShore 340)
+  lsc_sensor PLAT A -sensor X68433 -sensorname platform
+  lsc_loop set -loop 1 -channel A -maxheater 25W -resist 25Ohm -loopname platform -color green
+}
+
+ttb set/prop 25
+ttb set/integ 20
+ttb dblctrl/int2 100
+
+
+
+if {0} {
+
+# lakeshore 370
+
+ makenv tx -driver 370_lsc {
+  lsc_sensor Exhaust 1 pt1000e
+#  lsc_sensor Shield1top 2 pt1000e
+  lsc_sensor Shield1bot 3 pt1000e
+  lsc_sensor VTI 4 x68433
+  lsc_sensor Sample 7 x75610
+  #please set sample Thermpmeter to the real calib
+  GraphAdd tx.Exhaust K Stage2PT yellow
+#  GraphAdd tx.Shield1top K Shield1_top orange
+  GraphAdd tx.Shield1bot K Shield1_bot cyan
+  GraphAdd tx.VTI K VTI_HX orange
+  GraphAdd tx.Sample K Sample_T black
+ }
+
+}
+#debug tx
+
+
+# --- compressor ---
+makenv cp2800 cp2800
+
+GraphAdd cp2800.inp_water_t C InpWater_C red
+GraphAdd cp2800.out_water_t C OutWater_C blue
+GraphAdd cp2800.oil_t       C Oil_C      green
+GraphAdd cp2800.helium_t    C Helium_C   magenta
+
+GraphAdd cp2800.high_side_p_min psi High_psi_min red
+GraphAdd cp2800.high_side_p_max psi High_psi_max orange
+GraphAdd cp2800.low_side_p_min psi Low_psi_min green
+GraphAdd cp2800.low_side_p_max psi Low_psi_max dark_green
+
+if {0} {
+#---- Pressure gauge ---
+
+ makenv p pinp
+ GraphAdd p.a2 mbar P_pot yellow
+ GraphAdd p.a3 mbar P_VTI green
+ GraphAdd p.a4 mbar P_dump blue
+ GraphAdd p.a5 mbar Compress red
+ GraphAdd p.a6 mbar P3 cyan
+ GraphAdd p.a7 mbar P4 magenta
+#GraphAdd p.gnd mV1 gnd blue
+#GraphAdd p.max mV2 max red
+
+
+#--- flow meter ---
+
+ makenv flow bronkhorst
+
+ appendVars flow/ff/flow flow.counter/float/counter flow.ff/ff/ff flow.fi/fi/fi
+
+#--- cold trap ---
+#makenv n2 n2_ccu ccu
+#appendVars n2.upper/K2/N2_Upper n2.lower/K2/N2_Lower
+
+#---pressure in front of pump---
+#makenv nv nv_ccu ccu
+#appendVars nv.flow/mbar/nv_Flow nv.autoflow.flowset/mbar/nv_Set
+
+#GraphAdd nv.flow mbar pfront_flow 4
+
+
+#--solenoid valve unit ---
+
+#makenv mv svuold
+ makenv  mv -driver svu {needle 1 bypass 2}
+
+ #--ACM Levelmeter---
+ makenv He acm
+
+ #GraphAdd He pF Helium_level 4
+}