From 3db337ed6c2cf1e2d298304ae04d843c5891b855 Mon Sep 17 00:00:00 2001 From: Markus Zolliker Date: Wed, 27 May 2026 07:47:07 +0200 Subject: [PATCH] calib: change lower limit, change reference channel next time better with ORI2 instead of ILL1 ? --- tcl/calib.stick | 7 ++++--- tcl/drivers/zcalib.tcl | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/tcl/calib.stick b/tcl/calib.stick index c4dc8bb..c6ceef6 100644 --- a/tcl/calib.stick +++ b/tcl/calib.stick @@ -3,8 +3,8 @@ stickDesc = 50 mm calibration stick (ORI1/ORI2/ILL1), version with standard lsc3 makenv res -driver 370_lsc { lsc_sensor s1 -channel 1 -sensor raw -excitation 200uV lsc_sensor s2 -channel 2 -sensor raw -excitation 200uV - lsc_sensor s3 -channel 3 -sensor X75610 -excitation 200uV - lsc_sensor s4 -channel 4 -sensor raw -excitation 200uV + lsc_sensor s3 -channel 3 -sensor raw -excitation 200uV + lsc_sensor s4 -channel 4 -sensor X240357 -excitation 200uV lsc_sensor s5 -channel 5 -sensor raw -excitation 200uV lsc_sensor s6 -channel 6 -sensor raw -excitation 200uV } @@ -25,8 +25,9 @@ makenv calib -driver zcalib # first and last points with smaller step # steps are about 3%, 6%, 10% (57x), 5%, 2.5% # with ORI2, nv set 1.1 the base T is ~ 1.37 K +# calib tlist 1.38 1.42 1.51 logstep0.04 288 302 310 -calib tlist 1.38 1.42 1.51 logstep0.04 288 302 310 +calib tlist 1.44 1.51 logstep0.04 288 302 310 # timing is such that 2 * 24h are not enough # try with a little more precision (expecially at hi T) diff --git a/tcl/drivers/zcalib.tcl b/tcl/drivers/zcalib.tcl index b60df0f..e7c2566 100644 --- a/tcl/drivers/zcalib.tcl +++ b/tcl/drivers/zcalib.tcl @@ -51,7 +51,7 @@ proc stdConfig::zcalib {} { prop write zcalib::set_scanpos prop help "index within one measuring cycle: 0: reference, 1: 1st chan, 2: ref, 3: 2nd chan, ..." - node channels par -text "3 1 2 4 5 6" + node channels par -text "4 1 2 3 5 6" prop help "first channel is calibrated one" prop width 20