59 lines
7.3 KiB
JSON
59 lines
7.3 KiB
JSON
["ts", [{"path": "", "type": "float", "readonly": false, "cmd": "run ts", "description": "ts", "kids": 19},
|
|
{"path": "send", "type": "text", "readonly": false, "cmd": "ts send", "visibility": 3},
|
|
{"path": "status", "type": "text", "visibility": 3},
|
|
{"path": "is_running", "type": "int", "visibility": 3},
|
|
{"path": "set", "type": "float", "readonly": false, "cmd": "ts set", "visibility": 3},
|
|
{"path": "target", "type": "float"},
|
|
{"path": "running", "type": "int"},
|
|
{"path": "tolerance", "type": "float", "readonly": false, "cmd": "ts tolerance"},
|
|
{"path": "maxwait", "type": "float", "readonly": false, "cmd": "ts maxwait"},
|
|
{"path": "settle", "type": "float", "readonly": false, "cmd": "ts settle"},
|
|
{"path": "log", "type": "text", "readonly": false, "cmd": "ts log", "visibility": 3, "kids": 4},
|
|
{"path": "log/mean", "type": "float", "visibility": 3},
|
|
{"path": "log/m2", "type": "float", "visibility": 3},
|
|
{"path": "log/stddev", "type": "float", "visibility": 3},
|
|
{"path": "log/n", "type": "float", "visibility": 3},
|
|
{"path": "ramp", "type": "float", "readonly": false, "cmd": "ts ramp", "description": "ramp [K/min]"},
|
|
{"path": "heaterselect", "type": "enum", "enum": {"sample": 0, "mix": 1, "mix(temporarely)": 2}, "readonly": false, "cmd": "ts heaterselect"},
|
|
{"path": "control", "type": "enum", "enum": {"off": 0, "sample": 6, "mix": 5}, "readonly": false, "cmd": "ts control", "description": "click off to reload list"},
|
|
{"path": "heatermode", "type": "enum", "enum": {"disabled": -1, "off": 0, "on": 1}, "readonly": false, "cmd": "ts heatermode"},
|
|
{"path": "heaterrange", "type": "enum", "enum": {"2uW": 1, "20uW": 2, "200uW": 3, "2mW": 4, "20mW": 5}, "readonly": false, "cmd": "ts heaterrange"},
|
|
{"path": "autoheater", "type": "bool", "readonly": false, "cmd": "ts autoheater", "description": "automatic heater range", "kids": 12},
|
|
{"path": "autoheater/wlp0", "type": "float", "readonly": false, "cmd": "ts autoheater/wlp0", "description": "weak link base temperature (used for auto heater)", "visibility": 3},
|
|
{"path": "autoheater/wlp1", "type": "float", "readonly": false, "cmd": "ts autoheater/wlp1", "description": "weak link temperature at 1 uW (used for auto heater)", "visibility": 3},
|
|
{"path": "autoheater/wlp2", "type": "float", "readonly": false, "cmd": "ts autoheater/wlp2", "description": "weak link temperature at 10 uW (used for auto heater)", "visibility": 3},
|
|
{"path": "autoheater/wlp3", "type": "float", "readonly": false, "cmd": "ts autoheater/wlp3", "description": "weak link temperature at 100 uW (used for auto heater)", "visibility": 3},
|
|
{"path": "autoheater/wlp4", "type": "float", "readonly": false, "cmd": "ts autoheater/wlp4", "description": "weak link temperature at 1 mW (used for auto heater)", "visibility": 3},
|
|
{"path": "autoheater/mxp0", "type": "float", "readonly": false, "cmd": "ts autoheater/mxp0", "description": "weak link base temperature (used for auto heater)"},
|
|
{"path": "autoheater/mxp1", "type": "float", "readonly": false, "cmd": "ts autoheater/mxp1", "description": "mix.ch. temperature at 1 uW (used for auto heater)"},
|
|
{"path": "autoheater/mxp2", "type": "float", "readonly": false, "cmd": "ts autoheater/mxp2", "description": "mix.ch. temperature at 10 uW (used for auto heater)"},
|
|
{"path": "autoheater/mxp3", "type": "float", "readonly": false, "cmd": "ts autoheater/mxp3", "description": "mix.ch. temperature at 100 uW (used for auto heater)"},
|
|
{"path": "autoheater/mxp4", "type": "float", "readonly": false, "cmd": "ts autoheater/mxp4", "description": "mix.ch. temperature at 1 mW (used for auto heater)"},
|
|
{"path": "autoheater/switchdown", "type": "float", "readonly": false, "cmd": "ts autoheater/switchdown", "description": "percentage for auto heater switch down"},
|
|
{"path": "autoheater/switchup", "type": "float", "readonly": false, "cmd": "ts autoheater/switchup", "description": "when the calculated power is above this percentage, use higher range"},
|
|
{"path": "autoprop", "type": "bool", "readonly": false, "cmd": "ts autoprop", "description": "change prop value depending on actual power", "kids": 2},
|
|
{"path": "autoprop/prop", "type": "float", "readonly": false, "cmd": "ts autoprop/prop", "description": "prop value (maximum prop value when autheater is on)"},
|
|
{"path": "autoprop/integ", "type": "float", "readonly": false, "cmd": "ts autoprop/integ", "description": "integral value [sec], deriv is set to 0 on change"},
|
|
{"path": "instructions", "type": "text"},
|
|
{"path": "auto", "type": "enum", "enum": {"off": 0, "cool_vti": 1, "pipe_pump": 11, "pipes_ready": 12, "ready_for_sorbpump": 2, "sorb_pump": 3, "condense": 4, "circulate": 5, "remove_only": 60, "remove_and_warmup": 62, "remove_and_condense": 61, "remove_and_sorbpump": 63, "finished": 7}, "readonly": false, "cmd": "ts auto", "kids": 20},
|
|
{"path": "auto/usetrap", "type": "enum", "enum": {"trap_A": 0, "trap_B": 1}, "readonly": false, "cmd": "ts auto/usetrap"},
|
|
{"path": "auto/hasturbo", "type": "bool"},
|
|
{"path": "auto/pipes_pumped", "type": "bool", "readonly": false, "cmd": "ts auto/pipes_pumped"},
|
|
{"path": "auto/cool_crit", "type": "text", "readonly": false, "cmd": "ts auto/cool_crit", "description": "criterium for transition to ready_for_sorbpump"},
|
|
{"path": "auto/pumptime1", "type": "float", "readonly": false, "cmd": "ts auto/pumptime1", "description": "pump time [sec] while sorb at 40"},
|
|
{"path": "auto/pumptime2", "type": "float", "readonly": false, "cmd": "ts auto/pumptime2", "description": "pump time [sec] while sorb cools down"},
|
|
{"path": "auto/condensep", "type": "float", "readonly": false, "cmd": "ts auto/condensep"},
|
|
{"path": "auto/dumptarget", "type": "float", "readonly": false, "cmd": "ts auto/dumptarget"},
|
|
{"path": "auto/condenseflow", "type": "float", "readonly": false, "cmd": "ts auto/condenseflow", "description": "VTI flow for condensing and min. flow for cooling"},
|
|
{"path": "auto/circulateflow", "type": "float", "readonly": false, "cmd": "ts auto/circulateflow", "description": "VTI flow for circulating (may be changed during circulation)"},
|
|
{"path": "auto/onekstate", "type": "enum", "enum": {"normal": 0, "fill": 1, "optimize": 2}, "readonly": false, "cmd": "ts auto/onekstate"},
|
|
{"path": "auto/oneklimit", "type": "float", "readonly": false, "cmd": "ts auto/oneklimit"},
|
|
{"path": "auto/minflow", "type": "float", "readonly": false, "cmd": "ts auto/minflow", "description": "minimum VTI flow (optimize stops at this value)"},
|
|
{"path": "auto/p1low", "type": "float", "readonly": false, "cmd": "ts auto/p1low", "description": "p1 value indicating a negligible mixture amount"},
|
|
{"path": "auto/p2low", "type": "float", "readonly": false, "cmd": "ts auto/p2low", "description": "p2 value indicating a good vacuum"},
|
|
{"path": "auto/warmup_t", "type": "float", "readonly": false, "cmd": "ts auto/warmup_t", "description": "VTI temperature to reach when remove_and_warmup"},
|
|
{"path": "auto/vti_t", "type": "float", "readonly": false, "cmd": "ts auto/vti_t", "description": "VTI temperature to reach when remove_only"},
|
|
{"path": "auto/xgas", "type": "enum", "enum": {"pump": 0, "add": 1, "empty": 2}, "readonly": false, "cmd": "ts auto/xgas"},
|
|
{"path": "auto/xgas_pulse", "type": "float", "readonly": false, "cmd": "ts auto/xgas_pulse", "description": "opening time for xgas capillary [sec]"},
|
|
{"path": "auto/removephase", "type": "enum", "enum": {"raw_remove": 0, "wait_p1_low": 1, "wait_v6_open": 2, "wait_a_little": 3, "wait_v6_closed": 4, "wait_t_warmup": 5}, "readonly": false, "cmd": "ts auto/removephase"}]]
|