Node('leiden.psi.ch',
    '''Leiden Dilution''',
)

ah2700_uri   = 'linse-leiden-ts:3002'  # used in cfg/addons/ahtwo_cfg.pt
ls370_uri    = 'linse-leiden-ts:3004'  # used in ~/sea/tcl/leiden.config
tcs_uri      = 'linse-leiden-ts:3005'
#nanov_uri    = 'linse-leiden-ts:3006'  # used in ~/sea/tcl/leiden.config
k2601b_uri   = 'linse-leiden-ts:3006'  # used for HC experiment as heater
dilhtr_uri   = 'linse-leiden-ts:3007'
srbridge_uri = 'linse-leiden-ts:3008'

Mod('sea_main',
    'frappy_psi.sea.SeaClient',
    'main sea connection for leiden.config',
    config = 'leiden.config',
    service = 'main',
)

for name in ['T3K', 'Tstill', 'T50mK', 'Tmxlow', 'Tmxhigh', 'Tmxcx', 'Tblueo',
             'Tpt50', 'Tpt3high', 'Tpt3low', 'Twhite', 'Tgreen']:
    mname = name.replace('T','T_')
    Mod(mname,
        'frappy_psi.sea.SeaReadable', '',
        io='sea_main',
        sea_object='tt',
        rel_paths=[name],
        value=Param(unit='K'),
        extra_modules = ['raw'],
    )
    Mod(name.replace('T', 'R_'),
        'frappy_psi.sea.SeaReadable', '',
        io='sea_main',
        value=Param(unit='Ohm'),
        single_module=f'{mname}.raw'
    )

#Mod('cmn',
#    'frappy_psi.sea.SeaReadable', '',
#    io = 'sea_main',
#    sea_object = 'cmn',
#    extra_modules = ['u1', 'u2', 'temp'],
#)

#Mod('T_cmn',
#    'frappy_psi.sea.SeaReadable', '',
#    io='sea_main',
#    value=Param(unit='K'),
#    single_module='cmn.temp',
#)

#Mod('V_fixp',
#    'frappy_psi.sea.SeaReadable', '',
#    io='sea_main',
#    value=Param(unit='V'),
#    single_module='cmn.u2',
#)

#Mod('V_cmn',
#    'frappy_psi.sea.SeaReadable', '',
#    io='sea_main',
#    value=Param(unit='V'),
#    single_module='cmn.u1',
#)


Mod('tcs_io',
    'frappy_psi.tcs.IO',
    'tcs communication',
    uri=tcs_uri,
    )

Mod('still_htr',
    'frappy_psi.tcs.Heater',
    'still heater',
    io='tcs_io',
    channel=2,
    )

Mod('mix_io',
    'frappy_psi.dilhtr.IO',
    'dilhtr communication',
    uri=dilhtr_uri,
    )

Mod('mix_htr',
    'frappy_psi.dilhtr.WrappedHeater',
    'mixing chamber heater',
    io='mix_io',
    )

Mod('drive_mix',
    'frappy_psi.picontrol.PIctrl',
    'controlled mix ch. temperature',
    input_module = 'T_mxlow',
    output_module = 'mix_htr',
    output_min = 0,
    output_max = 0.02,
    p = 5,
    itime = 60,
   )

#Mod('drive_cmn',
#    'frappy_psi.picontrol.PIctrl',
#    'controlled cmn temperature',
#    input_module = 'T_cmn',
#    output_module = 'mix_htr',
#    output_min = 0,
#    output_max = 3e-2,
#    p = 2,
#    itime = 120,
#   )

#Mod('drive_fixp',
#    'frappy_psi.picontrol.PI',
#    'controlled fixpoint voltage',
#    value=Param(unit='V'),
#    input_module = 'V_fixp',
#    output_module = 'drive_mix',
#    output_min = 0.0,
#    output_max = 0.01,
#    p = 1,
#    itime = 120,
#   )

Mod('simio',
    'frappy_psi.bridge.BridgeIO',
    'communication to sim900',
    uri=srbridge_uri,
    )

Mod('res1',
    'frappy_psi.bridge.Resistance',
    'please add description',
    io='simio',
    port=1,
    )

Mod('res2',
    'frappy_psi.bridge.Resistance',
    'please add description',
    io='simio',
    port=3,
    )

Mod('phase1',
    'frappy_psi.bridge.Phase',
    'please add description',
    resistance='res1',
    )

Mod('phase2',
    'frappy_psi.bridge.Phase',
    'please add description',
    resistance='res2',
    )


Mod('dev1',
    'frappy_psi.bridge.Deviation',
    'please add description',
    resistance='res1',
    )

Mod('dev2',
    'frappy_psi.bridge.Deviation',
    'please add description',
    resistance='res2',
    )


Mod('vsource_io',
    'frappy_psi.k2601b.K2601bIO',
    'source meter',
#    uri = '129.129.156.90:5025',
     uri = k2601b_uri,
)


Mod('source',
    'frappy_psi.k2601b.SourceMeter'
    '',
    description = "keithley sourcemeter",
    mode = 2,
    vlimit = 0.5,
    ilimit = .0005,
    io = 'vsource_io',
)

Mod('hvolt',
    'frappy_psi.k2601b.Voltage'
    '',
    description = "Heater Voltage",
    active = False,
    limit = 1.0,
    target = 0.0,
    sourcemeter = 'source',
    io = 'vsource_io',
)

Mod('hcur',
    'frappy_psi.k2601b.Current'
    '',
    description = "Heater Current Source",
    active = True,
    limit = 0.0001,
    target = 0.0,
    sourcemeter = 'source',
    io = 'vsource_io',
)

Mod('hres',
    'frappy_psi.k2601b.Resistivity'
    '',
    description = "Heater Resistance",
    io = 'vsource_io',
)    

Mod('hpow',
    'frappy_psi.k2601b.Power'
    '',
    description = "Heater Power",
    io = 'vsource_io',
)