introduce CommonReadHandler and CommonWriteHandler for
better handling of the case when several parameters are
read or written in one go.
- ppms: use common handlers
+ ppms: modify error handling when command result is not OK
+ store poll attribute on read_* methods
Change-Id: I9a9d0972e206956bcb5a83c204fe5f92c69716e3
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27822
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- commands have to import arguments and export the result properly
Change-Id: I4ff8879e4e9a93b0a3c57e015b7df8a6328a9bbc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27577
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- add MultiWriteHandler
- the target and value type of secop_psi.ppms.Chamber are enums.
make the code for them compatible.
+ fix a bug overriding exportname with export=True in parameter
Change-Id: Iec1daf19b3fdf2c017f967e45019867b77c6c59a
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27583
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- setting the attribute using the name of an attached module
- getting the attribute results in the module object
+ change names iodev to io, iodevClass to ioClass,
sendRecv to communicate, HasIodev to HasIO
Change-Id: I200b63a5a7dc1453bf6ac998782b065645201900
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27575
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
A common problematic practice is, to declare the value parameter
with the same FloatRange than the target. Because of measurement
errors, a value might be near, but outside the limit.
In order to avoid this, we force the programmer to declare a
bigger range for the value than for the target, or to
explicitly disable this check on a module property.
It is also fine to declare the value without limits.
This behavior may be disabled via command line option or in the
general config file. For simplicity, FloatRanges inside data
structures are not considered.
+ above command line option is also used to disable the error
handling on a string to float conversion
+ log appropriate error message for string to float conversion
Change-Id: Ib78ea1fb7c821442bf5847030573c8c27822dea5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27574
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
a read method should not reply on the automatic conversion
of the return value from string to a number.
- transitional solution with generalConfig.lazy_numer_validation
+ changing slighly generalInit mechanism: for above feature
generalConfig.init is not required to be called (i.e. when
used on the client side)
Change-Id: Ibecce1a45669273c105932acdc0908de55bfd1b9
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27516
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
modules with a couple of parameters with similar read_* or
write_* methods may handle them by generic methods wrapped
with decorators ReadHandler / WriteHandler
The trinamic driver is included in this change for demonstrating
how it works.
In a further step, the special handling for the iohandler stuff can
be moved away from secop.server and secop.params, using this feature.
+ fix problem on startup of trinamic driver (needs MultiEvent.queue)
+ some other small fixes
+ apply recommended functools.wraps for wrapping
Change-Id: Ibfeff9209f53c47194628463466cee28366e17ac
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27460
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
create a class to be used for unique objects.
better for debugging and documentation than just using object()
+ remove unused unique objects
Change-Id: I32f65960ea2fbee4fccbeb49a4e11176b7185aa0
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27455
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- bin/secop-server options -v and -q applied to console logger only
- level for logfile taken from general config
- option for automatic deletion of old logfiles
- added 'comlog' level (between debug and info)
This allows to run the servers by default with 'comlog' level on
the logfiles, which helps a lot for analyzing very rare communication
errors in retrospect.
to avoid spamming of the normal log files, comlog data is stored
separately, one file per communicator
+ redesign of remote logging (no more need of LoggerAdapter)
Change-Id: Ie156a202b1e7304e50bbe830901bc75872f6ffe2
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27427
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
change name to 'readHwStatus'
needed after commit "check for bad read* and write_* methods"
Change-Id: I27467aa2a3a3bb0db5f418c99f2d2065390a190a
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27394
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
raise a ProgrammingError when a read_<param> or write_<param>
method is defined, but <param> is no parameter.
Change-Id: Iae4e617d078229182a90b202a6f81ebc49050118
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27386
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- complain when super call is omitted (this is a common programming
error in Mixins)
- redesign waiting mechanism for startup
+ rename MultiEvent method 'setfunc' to 'get_trigger'
Change-Id: Ica27a75597321f2571a604a7a55448cffb1bec5e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27369
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
to be used for a follow up change for startup events
Change-Id: Id8816eb8f561dcd8d1473e25a9685e796fb14953
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27364
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
fix 2 problems:
- in case the window is smaller than the pollinterval, isAtTarget might be False
for up to the timeout delay
- in case the history is shorter than the window, and the ramp is fast enough to miss
any points during ramp, isAtTarget is True before the window time is reached.
This happens because the history is reset on write_target
+ do not wait when target is not changed (by more than precision)
tested!
Change-Id: Ia4ff4378fe91fa93be50168b2883a20b49ebfb6a
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27159
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
- fix CommandType.__repr__
- secop/modules.py: command properties are allowed to be configured:
- section 2: remove comment and rename
- section 3: all accessible properties should be checked
- command description should be inherited also when taken from docstring
- move test for command inheritance to test_modules.py
- added tests to check for valid properties of commands
Change-Id: Ic7795e305048625558e415ece099e6824df6e2c4
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27135
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
change persistent flag to be an enum off/on/auto
Change-Id: I3b1685ea76afb3b7f8c2e6ca63fbf81fa987750e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27100
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- set default target unit to '$'
- shorten too verbose error message on client
- add shutdown method to server and dispatcher
Change-Id: Ib3a8b26bc31e988e45a3ff2efd734168d723d794
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27095
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Command.ownProperties must be definead in __init__
+ add test for this
Change-Id: I283331be6439a49ec61d28f04869a5b44704236f
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27104
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Sometimes it happens, that the same value determined once is
assigned several times to a parameter within a very short period.
Sending multiple updates is not useful in this case.
Change-Id: Icea66934c831fd9b2eac7d0394a124d002469914
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27091
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Correct inheritance has to follow the MRO, not only consider
the direct base classes.
Patchset 3: changed only tests, indicating that we need to change the code
Following patchsets include a major change in params.py and
modules.py. The parameter properties for inheritance, corresponding
mainly to the constructor arguments have to be stored separately
from the property values including inherited stuff.
Change-Id: Ibcbccb6abcc22e7e2d91df8f70ef64226684d8cc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26805
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
on initialization, the error message are collected and
shown before starting the server together with the traceback
of the last error. This should be the traceback of the
first error instead.
Change-Id: I86d4b42f7d4f98f2ab3b692cd6548e62acffa11b
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27011
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
in case the Parameter/Command is subclassed
Change-Id: Ib34fc78e72cd04e743e35ef7ccd40b2eae03b614
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26450
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
for the trinamic motor we need persistent parameters
Change-Id: Id509b87f8368ea5ba1aca71951f79433b0b4b79f
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26405
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- do not show command result dialog when result is None
- apply fmtstr, if available
+ fix io import in secop.core
+ change old style <basecls>.__init__(self, ...) calls to super().__init__(...)
Change-Id: I599d5d8e8ff430ea9454a0858d703290e87454fc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26397
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Jens Krueger <jens.krueger@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
rename secop.stringio to secop.io, which includes now
also BytesIO and the common base class IOBase
+ a small fix in error handling
Change-Id: I8e305e2c164f4ed131f4b36ef45edd8bd222336d
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26393
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- nodestatechange callback must appear after the online attribute
is changed
- IntRange: move range validation outside of try except
- fixes on some error names
- well defined error message 'no such class' in secop.lib.get_class
- try again 4 times when starting Tcp Server on EADDRINUSE
- fix error handling
Change-Id: I4eee9b79ea8173936b9f5193b87e006ac8fca827
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26171
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- wrong unit for 'ramp'
- disable Setposition for TemperatureController
- write_target should return the new target
- AnalogInput should not crash initialisation if reading the unit fails
- convert super(...) calls to py3 style super()
- use proper exception chaining
- NamedDigital*put: mapping may already be a dict.
Change-Id: I03ce5f29581dcb3b33466771e7a8b8dd4b1e2bdb
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25960
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
removing an inherited command or parameter can now be indicated
with an attribute set to None
Change-Id: I7582434013856190b346e381d2e634509896ccb3
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25963
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
for debugging purposes, getting the description of a module
or even a parameter is usefull
therefore the following will work
describe <module>
describe <module>:<param>
Change-Id: Ie262ae12c23d1c151cdc01830ad4f8fd5ec3c5f1
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25962
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
for creating extra parameters a subclass of SimBase is created,
in order to treat parameters and read_/write_ methods properly.
Change-Id: I9061b9afb0f8922b36b8f9448c45bb3aadb8f515
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25961
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
