modules using the old poller (now called secop.poller.BasicPoller)
need to explcitly declare it (pollerClass = BasicPoller)
BasicPoller is still used in:
secop_mlz/amagnet.py
secop_mlz/entangle.py
secop/simulation.py
Remark: before removing BasicPoller we may need a replacement for
Readable.pollParams
Change-Id: If1ae8b68e02f13e601334656b818337c882e06cc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21910
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
this change is triggered by the fact, that assigining a unit
in the config file did no longer work.
this change has several implications:
1) secop.properties must not import secop.datatypes:
- as ValueType can not be imported, the default behaviour with
'mandatory' and 'default' arguments was slightly changed
- instead of checking for DataType when exporting, a try/except
was used
2) the datatype of datatype properties is sometimes not yet defined.
a stub is used in this cases instead, which is later replaced by
the proper datatype. The number of stubs may be reduced, but this
should be done in a later change, as the diff will be much less
readable.
3) in config files, datatype properties can be changed like parameter
properties. HasProperties.setProperties/checkProperties/getProperties
are overridden for this.
the config editor seems still to work, an issue (probably py3) had
to be fixed there
Change-Id: I1efddf51f2c760510e913dbcaa099e8a89c9cab5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21399
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
some u"" (double quotes) were not found in change before
Change-Id: I85912892bbe7b57afee758c69d1aa7073557adc0
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21326
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Bjoern Pedersen <bjoern.pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
complaints by pylint are mainly related to
- remove object from base list in class definitions
- unnecessary else/elif after return/raise
Change-Id: I13d15449149cc8bba0562338d0c9c42e97163bdf
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21325
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- None <= 0 is invalid in py3
- restrict BLOBType to bytes (may be changed after migration to py3)
- remove long
- use list(<dict>.items()) when dict is changed within loop
- allow initialization of properties in HasProperties without
supercall to base class
- <dict>.values() can not be indexed
- adapted/removed various tests. additional tests might be added
after definitive migration to py3
after this change, all the tests run with py3, also secop-server and
secop-gui were tested with an example, but other code might still contain
py3 incompatibilities
Change-Id: I881c6972aeabb8494a21a6cbc7ffeddfd4f5d4f8
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21306
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Bjoern Pedersen <bjoern.pedersen@frm2.tum.de>
- modules and accessibles are changed back to a JSON object
- datatype is changed from a JSON array with 2 elements to
a JSON object with one element, with the basic type as key
- the client side is kept compatible with the old syntax
Change-Id: Icd640bbcdec26a895c96720e107e874529340a73
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21032
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
messages might get lost after activate, when the number of parameters
exceeds maxlen of the output queue, as a limited deque silently overwrites
messages.
first try: use an infinite deque, but slow down appending thread when deque
gets too big
-> does not work because the appending thread is the same
second try: increase maximum a lot, on overflow log an error message and
close connection
Change-Id: I20376f7e08240dabe43269fa63c596f07e59ddf6
Reviewed-on: https://forge.frm2.tum.de/review/20982
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
+ DataType validators are shifted to __call__
+ as_json is moved to export_datatape()
+ new HasProperties Base Mixin for Modules/DataTypes
+ accessibles can be accessed via iterator of a module
+ properties are properly 'derived' and checked, are set with .setPropertyValue
remember: parameters only have properties, so use getPropertyValue()
Change-Id: Iae0273f971aacb00fe6bf05e6a4d24a6d1be881a
Reviewed-on: https://forge.frm2.tum.de/review/20635
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
needs a bigger rework, since READREPLY and EVENTREPLY are now different....
Also the format of the error-reply got changed :(
Change-Id: I1760743238227730ee49aaf92b54e0ff5f25423b
Reviewed-on: https://forge.frm2.tum.de/review/20246
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
the export argument of an accessible allows now to specify an other
external name than the attribute used internally.
export=True (default, use defined name, or prefix with '_' when
name not in predefined list)
export=False (do not export)
export=<any string> (special cases only)
Change-Id: I6c6669cd502d9d6fd3aa40091673e5554fd961bd
Reviewed-on: https://forge.frm2.tum.de/review/19664
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
- for now, the definition also accepts the old syntax
(to be changed later)
- Commands have datatype CommandType
- do not need keyword for the decription parameter of Override
- issue a Warning when a Parameter is overwritten without Overrride
(this should be turned into an error message)
-
Change-Id: Ib2c0f520abb5b4d7e6aed4d77a0d2b8bc470a85a
Reviewed-on: https://forge.frm2.tum.de/review/18251
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
unfortunately IntEnum can't be bent like we would need it (extensible).
So we had to write our own....
The members of the Enum still behave like ints, but also have
.name and .value attributes, should they be needed.
needed adoptions to correctly use (and test) the EnumType are included.
Change-Id: Ie019d2f449a244c4fab00554b6c6daaac8948b59
Reviewed-on: https://forge.frm2.tum.de/review/17843
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
also make interface more explicit
Change-Id: Ib104e2c050d3e98e9d434d502951e33619784e2e
missing: test cases for *.from_string(input) methods
Reviewed-on: https://forge.frm2.tum.de/review/16893
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
+ rework GUI
- include a combobox for selection of visibility
- include a checkbox wether validation should be done in the client
- remove unused lineEdit
+ improve datatypes
+ improve tests for new descriptive data
+ metaclasse: fix overlooked read_* or write_* func's
+ improve polling
+ Introduce new ErrorClasses
+ dispatcher: use new features of datatypes + PARAMS
+ improve lib
+ autopep8
+ first working version of MLZ_entangle integration
+ split specific stuff into it's own package (MLZ,demo,ess)
Change-Id: I8ac3ce871b28f44afecbba6332ca741095426712
+ make parameter-properties configurable
+ better derivation of automatic properties
+ implement 'group' properties (how to display in gui???
+ clean up descriptive data by omitting unset and live properties
Change-Id: Icd2b6e91e09037e9d4a8d6ad88483f8509a2cf5f
