- remove secop.poller and basic poller
- regular polls for 'important' parameters done by method doPoll
- all other parameters are polled slower (slowInterval) and
with lower priority (only one at a time when main poll is due)
- nopoll decorator for read_* to disable poll
- enablePoll attribute (default True) for disabling polling a module
- fast polls may be implemented by means of a statemachine
- configurable slow poll interval
+ allow a Parameter to override a Property (parameter
Readable.pollinterval overrides Module.pollinterval)
Change-Id: Ib1b3453041a233678b7c4b4add22ac399670e447
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27832
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
A common problematic practice is, to declare the value parameter
with the same FloatRange than the target. Because of measurement
errors, a value might be near, but outside the limit.
In order to avoid this, we force the programmer to declare a
bigger range for the value than for the target, or to
explicitly disable this check on a module property.
It is also fine to declare the value without limits.
This behavior may be disabled via command line option or in the
general config file. For simplicity, FloatRanges inside data
structures are not considered.
+ above command line option is also used to disable the error
handling on a string to float conversion
+ log appropriate error message for string to float conversion
Change-Id: Ib78ea1fb7c821442bf5847030573c8c27822dea5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27574
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- bin/secop-server options -v and -q applied to console logger only
- level for logfile taken from general config
- option for automatic deletion of old logfiles
- added 'comlog' level (between debug and info)
This allows to run the servers by default with 'comlog' level on
the logfiles, which helps a lot for analyzing very rare communication
errors in retrospect.
to avoid spamming of the normal log files, comlog data is stored
separately, one file per communicator
+ redesign of remote logging (no more need of LoggerAdapter)
Change-Id: Ie156a202b1e7304e50bbe830901bc75872f6ffe2
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27427
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
new client intended as base class for all clients
- based on Ennos secop client in nicos ([WIP] provide secop client)
- self healing connection singletons
- extension for other than TCP is foreseen (by extending new uri schemes)
- extensible name mangling
- seperate rx and tx threads supporting events
- internal cache
- extensible error handling
- callback for unhandled messages
- callback for descriptive data change
- callback for node stat change (connected, disconnected)
- a short close down and reconnect without change in descriptive data
does not disturb the client side
works with secop-gui (change follows), planned to be used for Frappy
internal secop proxy and as a replacement for secop.client.baseclient.Client
in the nicos secop device.
-> secop/client/baseclient.py to be removed after planned changes
moved secop/client/__init__.py to secop/client/console.py because secop.client
would be the natural place to put the new base class.
Change-Id: I1a7b1f1ded2221a8f9fcdd52f9cc7414e8fbe035
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22218
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
put encoders and framers into their own files.
also rework messages and dispatcher
make tcpserver functional
FIRST WORKING VERSION!
(no daemon mode yet, sorry)
start bin/server.py, connect a terminal to localhost:10767
and press enter....
note: not all requests are bug free yet, ListDevicesRequest() works
Change-Id: I46d6e469bca32fc53057d64ff48cce4f41ea12ea
