- StringIO.writeline sends a command and does not expect a reply
- StringIO.multicomm and BytesIO.multicomm is improved in order
to insert individual delays in between lines and individual
noreply flags
+ fix a bug in tutorial_t_control
+ improve readability of frappy.lib.classdoc.indent_description
Change-Id: I9dea113e19147684ec41aca5267a79816bbf202c
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/32267
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
latexpdf fails with error message "Too deply nested".
We want to avoid reducing the nesting level of doc strings
in frappy.lib.classdoc (less nice output) or a level of
nesting in method doc strings.
- latex removed from Jenkinsfile
- added support for rst2pdf
Change-Id: Ieb3355ef506e636e7e43a726c68327e3b1154469
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/32406
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
reading back the target does not work properly, because
a) the readback value might be delayed
b) there is no command to read back the target, SETP?1
is returning the working setpoint, which might be distinct
in case of a ramp
Change-Id: I0da2dbfc1a8ddbecbae6d0456ff64e008bc56336
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/31983
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
'Done' was introduced in order to suppress unneccessary
duplicate updates. However, since super calls on access methods are
allowed, it is not nice when such a method returns Done, as this
is not automagically replaced by the current parameter value.
As a consequence:
- using Done is discouraged, but not (yet) removed in all code
- the 'omit_unchanged_within' property is moved from Module to an
internal Parameter property 'update_unchanged'
- its default is moved from a SEC node property to generalConfig
- the 'update_unchanged' parameter property may be set to
'never' for parameters where duplicate updates make no sense
- this property might be set to 'always', for measurements, where
even unchanged values taken from HW should be transmitted
Change-Id: I2847c983ca09c2c4098e402edd08d0c96c3913f4
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/30672
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
allow to define default settings on the IO class:
- a default 'port' may be given for tcp
- defaults like 'baudrate' or 'parity' might be given
for serial connections
this avoids explicit settings in the config file in case
the settings can not be changed or have a typical value
other than the defaults in serial.Serial
Change-Id: I990f47d63e785f8cc48c4af197944a8eebe91fb4
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/30555
Reviewed-by: Georg Brandl <g.brandl@fz-juelich.de>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
add tutorial for Berlin hands-on workshop
+ improve the documentation (hints for structure welcome)
+ remove 'optional' parameter property
(is not yet used - should not appear in doc)
+ added test property in frappy_demo.cryo alters Parameter class
('test' property appears in Parameter doc)
Change-Id: I3ea08f955a92f72451fd23a5ff00d1185c7fb00e
values return from read_* methods should be converted
from string to float on float parameters
+ fix some wording
Change-Id: Ic80010c6fbe3eef23483ff69c8a43e25afb8bb6a
- write method may be used internally on a readonly parameter
+ add IDLE, WARN, BUSY and ERROR to secop.core
+ secop.datatype.EnumType: allow 'self' as member name
+ secop.lib.statemachine: log Restart and Stop exceptions only on debug level
+ secop_psi.ccu4.CCU4: explicit conversion to float
+ secop.proxy: remove superfluos and erroneous make_secop_error
Change-Id: I2f13d31ceacd2bde65eab64f8eae4225556c18f5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27963
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- setting the attribute using the name of an attached module
- getting the attribute results in the module object
+ change names iodev to io, iodevClass to ioClass,
sendRecv to communicate, HasIodev to HasIO
Change-Id: I200b63a5a7dc1453bf6ac998782b065645201900
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27575
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
create a class to be used for unique objects.
better for debugging and documentation than just using object()
+ remove unused unique objects
Change-Id: I32f65960ea2fbee4fccbeb49a4e11176b7185aa0
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27455
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- a new wrapper for a read function is not only to be created when
the a new read method is in the class dict, but also when
it is inherited, but not yet wrapped
- a handler must not be ignored, when a write method is inherited
- a proxy class must not call checkProperties
+ remove trailing spaces in tutorial_helevel.rst
Change-Id: I16024c14232ea200db91a1bc07ec23326219ab68
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25093
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- removed secop/metaclass.py
- moved code from ModuleMeta to modules.HasAccessibles.__init_subclass__
- reworked properties:
assignment obj.property = value now always allowed
- reworked Parameters and Command to be true descriptors
- Command must now be solely used as decorator
- renamed 'usercommand' to 'Command'
- command methods no longer start with 'do_'
- reworked mechanism to determine accessible order:
the attribute paramOrder, if given, determines order of accessibles
+ fixed some issues makeing the IDE more happy
+ simplified code for StatusType and added a test for it
Change-Id: I8045cf38ee6f4d4862428272df0b12a7c8abaca7
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25049
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- flatten hierarchy (some links do not work when using folders)
- add a tutorial for programming a simple driver
- clean description using inspect.cleandoc
+ fix a bug with 'unit' pseudo property in a Parameter used as override
Change-Id: I31ddba5d516d1ee5e785e28fbd79fca44ed23f5e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25000
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
for easier distinction:
- camelCase or singleword: framework method
- snake_case: driver method
(driver) parameters are lowercase, single word framework variables may
have to start with uppercase letters to distinguish...
Change-Id: I76536b6390324625b242c4f190553014c2ca61d6
Reviewed-on: https://forge.frm2.tum.de/review/20295
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- created secop_v2017-09-14.rst, based on the GoogleDocs
SECoP Preliminary V2016-11-30 (rc 2)
- this Document is supposed to contain the full SECoP standard
- created SECoP issues
- moved everything else to "outdated" (kept for reference)
Change-Id: I87d69d1846fc4ed55f1c78b22fd4650d8550152b
Reviewed-on: https://forge.frm2.tum.de/review/16573
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
