fetched mlz version

- before some chamges in the gerrit pipline

Change-Id: I33eb2d75f83345a7039d0fb709e66defefb1c3e0

cfg/sim_mlz_stressihtf2_v2_cfg.py

@@ -0,0 +1,82 @@
+Node('stressihtf2_v2',
+    '[sim] Stressihtf2 box of MLZ Sample environment group\n'
+    '\n'
+    'Controls an High Temperature Furnace with an Eurotherm and an PLC controlling some valves and checking cooling water.',
+    'tcp://10767',
+)
+
+
+Mod('T',
+    'frappy.simulation.SimDrivable',
+    'Main temperature control node of Stressihtf2.',
+    value = Param(default=20,
+                datatype={"type":"double", "min":0, "unit":"degC"}),
+    target = Param(default=20,
+                datatype={"type":"double", "min":0, "max":2000, "unit":"degC"}),
+    extra_params='ramp,regulationmode,abslimits,userlimits',
+    ramp = Param(
+        default=60,
+        datatype={"type":"double", "min":0, "max":600, "unit":"K/min"},
+        description='target ramping speed in K/min.',
+    ),
+    abslimits = Param(
+        default=[0,2000],
+        datatype={"type":"limit", "members":{"type":"double", "min":0, "max":2000, "unit":"degC"}},
+        description='currently active absolute limits for the setpoint. depend \
+                on the regulationmode parameter (both/stick->0..600, tube->0..300K).',
+    ),
+    userlimits = Param(
+        default=[0,300],
+        datatype={"type":"limit", "members":{"type":"double", "min":0, "max":2000, "unit":"degC"}},
+        description='current user set limits for the setpoint. must be inside abslimits.',
+        readonly=False,
+    ),
+    meaning=['temperature_regulation', 10],
+)
+
+Mod('T_sample',
+    'frappy.simulation.SimReadable',
+    '(optional) Sample temperature sensor.',
+    value = Param(default=300,
+                datatype={"type":"double", "min":0, "unit":"degC"}),
+    visibility='expert',
+    meaning=["temperature", 9],
+)
+
+Mod('N2',
+    'frappy.simulation.SimWritable',
+    'Switches the N2 gas inlet on or off.',
+    value = Param(default='off',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    target = Param(default='off',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    visibility='expert',
+)
+
+Mod('He',
+    'frappy.simulation.SimWritable',
+    'Switches the He gas inlet on or off.',
+    value = Param(default='off',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    target = Param(default='off',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    visibility='expert',
+)
+
+Mod('lamps',
+    'frappy.simulation.SimWritable',
+    'Switches the heating lamps on or off.',
+    value = Param(default='on',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    target = Param(default='on',
+                datatype={"type":"enum", "members":{'off':0,'on':1}}),
+    visibility='expert',
+)
+
+Mod('water_ok',
+    'frappy.simulation.SimReadable',
+    'Readout of the cooling water state.',
+    value = Param(default='ok',
+                datatype={"type":"enum", "members":{'failed':0,'ok':1}}),
+    visibility='expert',
+)