fixes in mb11/dil5

- no need fro second slot in TemperatureLoop, PressureLoop
- only ValvePos needs two slots
- added testwise heater to mix chamber

Change-Id: Iac4592d037a5e6a4f586041762992d75cc77e3de

cfg/main/mb11.cfg

@@ -25,7 +25,7 @@ class = secop_psi.mercury.TemperatureAutoFlow
 description = static heat exchanger temperature
 output_module = htr_stat
 needle_valve = p_stat
-slot = DB6.T1,DB1.H1
+slot = DB6.T1
 io = itc1
 tolerance = 0.1
 
@@ -56,7 +56,7 @@ class = secop_psi.mercury.TemperatureAutoFlow
 description = dynamic heat exchanger temperature
 output_module = htr_dyn
 needle_valve = p_dyn
-slot = DB7.T1,DB2.H1
+slot = DB7.T1
 io = itc1
 tolerance = 0.1
 
@@ -98,7 +98,7 @@ io = ips
 class = secop_psi.mercury.TemperatureLoop
 description = neck heater 1 temperature
 output_module = htr_neck1
-slot = MB1.T1,MB0.H1
+slot = MB1.T1
 io = itc2
 tolerance = 1
 
@@ -112,7 +112,7 @@ io = itc2
 class = secop_psi.mercury.TemperatureLoop
 description = neck heater 2 temperature
 output_module = htr_neck2
-slot = DB6.T1,DB1.H1
+slot = DB6.T1
 io = itc2
 tolerance = 1
 
@@ -126,7 +126,7 @@ io = itc2
 class = secop_psi.mercury.TemperatureLoop
 description = static needle valve temperature
 output_module = htr_nvs
-slot = DB7.T1,DB2.H1
+slot = DB7.T1
 io = itc2
 tolerance = 0.1
 
@@ -140,7 +140,7 @@ io = itc2
 class = secop_psi.mercury.TemperatureLoop
 description = dynamic needle valve heater temperature
 output_module = htr_nvd
-slot = DB8.T1,DB3.H1
+slot = DB8.T1
 io = itc2
 tolerance = 0.1
 

cfg/stick/dil5.cfg

@@ -10,17 +10,17 @@ class = secop_psi.mercury.IO
 description = connection to triton software
 uri = tcp://linse-dil5:33576
 
-#[ts]
-#class = secop_psi.switching_sensor.Sensor
-#description = either T_mix or T_mix_wup, depending on T
-#lower = T_mix
-#upper = T_mix_wup
-#switch_range = (1.5, 4)
-
 [ts]
-class = secop_psi.triton.TemperatureSensor
+class = secop_psi.triton.TemperatureLoop
 description = mix. chamber temperature
 slot = T5
+output_module = htr_mix
+io = triton
+
+[htr_mix]
+class = secop_psi.triton.HeaterOutput
+description = mix. chamber heater
+slot = H1
 io = triton
 
 [T_sorb]

secop_psi/mercury.py

@@ -343,7 +343,7 @@ class HeaterOutput(HasInput, MercuryChannel, Writable):
 
 
 class TemperatureLoop(TemperatureSensor, Loop, Drivable):
-    channel_type = 'TEMP,HTR'
+    channel_type = 'TEMP'
     output_module = Attached(HeaterOutput, mandatory=False)
     ramp = Parameter('ramp rate', FloatRange(0, unit='K/min'), readonly=False)
     enable_ramp = Parameter('enable ramp rate', BoolType(), readonly=False)
@@ -463,7 +463,7 @@ class ValvePos(HasInput, MercuryChannel, Drivable):
 
 
 class PressureLoop(HasInput, PressureSensor, Loop, Drivable):
-    channel_type = 'PRES,AUX'
+    channel_type = 'PRES'
     output_module = Attached(ValvePos, mandatory=False)
     tolerance = Parameter(default=0.1)
 

secop_psi/triton.py

@@ -175,7 +175,7 @@ class FlowMeter(MercuryChannel, Readable):
         return self.query('FLOW:SIG:FLOW')
 
 
-class TemperatureSensor(mercury.TemperatureSensor):
+class ScannerChannel:
     # TODO: excitation, enable
     # TODO: switch on/off filter, check
     filter_time = Parameter('filter time', FloatRange(1, 200, unit='sec'), readonly=False)
@@ -203,5 +203,13 @@ class TemperatureSensor(mercury.TemperatureSensor):
         return self.change('TEMP:MEAS:PAUS', value)
 
 
-class TemperatureLoop(mercury.TemperatureLoop):
+class TemperatureSensor(ScannerChannel, mercury.TemperatureSensor):
     pass
+
+
+class TemperatureLoop(ScannerChannel, mercury.TemperatureLoop):
+    pass
+
+
+class HeaterOutput(mercury.HeaterOutput):
+    pass  # not sure if we need special handling of triton heater output: to be checked!