Convert example configs to python

Fixes: #4627

Change-Id: I1049af9fa2f3f9ec06e55811dc9ecfa5f359c805

cfg/sim_mlz_amagnet_cfg.py

@@ -0,0 +1,116 @@
+Node('SIM_MLZ_amagnet(Garfield)',
+    'MLZ-Amagnet\n'
+    '\n'
+    'Water cooled magnet from ANTARES@MLZ.\n'
+    '\n'
+    '    Use module to control the magnetic field.\n'
+    'Don\'t forget to select symmetry first (can be moved only at zero field!).\n'
+    '\n'
+    'Monitor T1..T4 (Coil temps), if they get to hot, field will ramp down!\n'
+    '\n'
+    'In case of Problems, contact the ANTARES people at MLZ.',
+    'tcp://10767',
+    visibility = 'expert',
+    foo = 'bar',
+)
+
+Mod('enable',
+    'frappy.simulation.SimWritable',
+    'Enables to Output of the Powersupply',
+    value = Param(datatype={"type":"enum", "members":{'On':1,'Off':0}}),
+    target = Param(datatype={"type":"enum", "members":{'On':1,'Off':0}}),
+    visibility = 'advanced',
+)
+
+Mod('polarity',
+    'frappy.simulation.SimWritable',
+    'polarity (+/-) switch\n'
+    '\n'
+    'there is an interlock in the plc:\n'
+    'if there is current, switching polarity is forbidden\n'
+    'if polarity is short, powersupply is disabled',
+    value = Param(datatype={"type":"enum", "members":{'+1':1,'0':0,'-1':-1}}),
+    target = Param(datatype={"type":"enum", "members":{'+1':1,'0':0,'-1':-1}}),
+    visibility = 'advanced',
+)
+
+
+Mod('symmetry',
+    'frappy.simulation.SimWritable',
+    'par/ser switch selecting (a)symmetric mode\n'
+    '\n'
+    'note: on the front panel symmetric is ser, asymmetric is par',
+    value = Param(
+        datatype={"type":"enum", "members":{'symmetric':1,'short':0, 'asymmetric':-1}},
+        default = 'symmetric'
+        ),
+    target = Param(datatype={"type":"enum", "members":{'symmetric':1,'short':0, 'asymmetric':-1}}),
+    visibility = 'advanced',
+)
+
+for i in range(1,5):
+    Mod('T%d' % i,
+        'frappy.simulation.SimReadable',
+        'Temperature%d of the coils system' % i,
+        value = Param(default = 23.45, unit='degC'),
+    )
+
+Mod('currentsource',
+    'frappy.simulation.SimDrivable',
+    'Device for the magnet power supply (current mode)',
+    value = 0,
+    #abslimits = (0,200),
+    #speed = 1,
+    #ramp = 60,
+    #precision = 0.02,
+    #current = 0,
+    #voltage = 10,
+    visibility = 'advanced',
+    extra_params = 'abslimits, speed, ramp, precision, current, voltage, window',
+    abslimits = Param(
+        default = (0, 200),
+        datatype = {"type":"limit", "members":{"type":"double", "min":0, "max":200, "unit":"A"}}
+    ),
+    speed = Param(
+        default = 10,
+        datatype = {"type":"double", "min":0, "max":10, "unit":"A/s"}
+        ),
+    ramp = Param(
+        default = 600,
+        datatype = {"type":"double", "min":0, "max":600, "unit":"A/min"}
+        ),
+    precision = Param(
+        default = 0.1,
+        datatype = {"type":"double", "unit":"A"}
+        ),
+    current = Param(
+        default = 0,
+        datatype = {"type":"double", "min":0, "max":200, "unit":"A"}
+        ),
+    voltage = Param(
+        default = 0,
+        datatype = {"type":"double", "min":0, "max":10, "unit":"V"}
+        ),
+    window = Param(
+        default = 10,
+        datatype = {"type":"double", "min":0, "max":120, "unit":"s"}
+    )
+)
+
+Mod('mf',
+    'frappy_mlz.amagnet.GarfieldMagnet',
+    'magnetic field module, handling polarity switching and stuff',
+    subdev_currentsource='currentsource',
+    subdev_enable='enable',
+    subdev_polswitch='polarity',
+    subdev_symmetry='symmetry',
+    target = Param(unit='T'),
+    value = Param(unit='T'),
+    userlimits=(-0.35, 0.35),
+    calibrationtable={'symmetric':[0.00186517, 0.0431937, -0.185956, 0.0599757, 0.194042],
+        'short': [0.0, 0.0, 0.0, 0.0, 0.0],
+        'asymmetric':[0.00136154, 0.027454, -0.120951, 0.0495289, 0.110689]},
+    meaning=("magneticfield", 20),
+    visibility='user',
+    abslimits=(-0.4,0.4),
+)