linse/frappy
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

remove support for declaring parameters/commands as accessibles

Browse Source 
use parameters/commands for this

Change-Id: I41f68c7f65f0ea451e639092a44a8ff8f5710bfc
Reviewed-on: https://forge.frm2.tum.de/review/20275
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
This commit is contained in:
Enrico Faulhaber
2019-03-28 17:46:46 +01:00
parent 568e214a91
commit 752f8f8093
9 changed files with 44 additions and 47 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
secop/features.py
View File

@ -42,7 +42,7 @@ class HAS_PID(Feature):
# note: (i would still but them in the same group, though)
# note: if extra elements are implemented in the pid struct they MUST BE
# properly described in the description of the pid Parameter
accessibles = {
parameters = {
'use_pid' : Parameter('use the pid mode', datatype=EnumType(openloop=0, pid_control=1), ),
'p' : Parameter('proportional part of the regulation', datatype=FloatRange(0), ),
'i' : Parameter('(optional) integral part', datatype=FloatRange(0), optional=True),
@ -60,7 +60,7 @@ class HAS_PID(Feature):
class Has_PIDTable(HAS_PID):
accessibles = {
parameters = {
'use_pidtable' : Parameter('use the zoning mode', datatype=EnumType(fixed_pid=0, zone_mode=1)),
'pidtable' : Parameter('Table of pid-values vs. target temperature', datatype=ArrayOf(TupleOf(FloatRange(0),
StructOf(p=FloatRange(0),
@ -78,7 +78,7 @@ class HAS_Persistent(Feature):
# 'coupled' : Status.BUSY+2, # to be discussed.
# 'decoupling' : Status.BUSY+3, # to be discussed.
#}
accessibles = {
parameters = {
'persistent_mode': Parameter('Use persistent mode',
datatype=EnumType(off=0,on=1),
default=0, readonly=False),
@ -95,7 +95,7 @@ class HAS_Tolerance(Feature):
# detects IDLE status by checking if the value lies in a given window:
# tolerance is the maximum allowed deviation from target, value must lie in this interval
# for at least ´timewindow´ seconds.
accessibles = {
parameters = {
'tolerance': Parameter('Half height of the Window',
datatype=FloatRange(0), default=1, unit='$'),
'timewindow': Parameter('Length of the timewindow to check',
@ -105,7 +105,7 @@ class HAS_Tolerance(Feature):
class HAS_Timeout(Feature):
accessibles = {
parameters = {
'timeout': Parameter('timeout for movement',
datatype=FloatRange(0), default=0, unit='s'),
}
@ -113,7 +113,7 @@ class HAS_Timeout(Feature):
class HAS_Pause(Feature):
# just a proposal, can't agree on it....
accessibles = {
parameters = {
'pause': Command('pauses movement', argument=None, result=None),
'go': Command('continues movement or start a new one if target was change since the last pause',
argument=None, result=None),
@ -121,7 +121,7 @@ class HAS_Pause(Feature):
class HAS_Ramp(Feature):
accessibles = {
parameters = {
'ramp': Parameter('speed of movement', unit='$/min',
datatype=FloatRange(0)),
'use_ramp': Parameter('use the ramping of the setpoint, or jump',
@ -134,14 +134,14 @@ class HAS_Ramp(Feature):
class HAS_Speed(Feature):
accessibles = {
parameters = {
'speed' : Parameter('(maximum) speed of movement (of the main value)',
unit='$/s', datatype=FloatRange(0)),
}
class HAS_Accel(HAS_Speed):
accessibles = {
parameters = {
'accel' : Parameter('acceleration of movement', unit='$/s^2',
datatype=FloatRange(0)),
'decel' : Parameter('deceleration of movement', unit='$/s^2',
@ -150,7 +150,7 @@ class HAS_Accel(HAS_Speed):
class HAS_MotorCurrents(Feature):
accessibles = {
parameters = {
'movecurrent' : Parameter('Current while moving',
datatype=FloatRange(0)),
'idlecurrent' : Parameter('Current while idle',
@ -160,7 +160,7 @@ class HAS_MotorCurrents(Feature):
class HAS_Curve(Feature):
# proposed, not yet agreed upon!
accessibles = {
parameters = {
'curve' : Parameter('Calibration curve', datatype=StringType(80), default='<unset>'),
# XXX: tbd. (how to upload/download/select a curve?)
}