fix regression from renaming device to module

Change-Id: I05c6c1d5bef2d6e4bce6a6130793bf8a8ed9bd6c
Reviewed-on: https://forge.frm2.tum.de/review/17272
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>

etc/amagnet.cfg

@@ -21,17 +21,17 @@ bindport=10767
 framing=eol
 encoding=secop
 
-[device enable]
+[module enable]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice='tango://localhost:10000/box/plc/_enable'
+tangomodule='tango://localhost:10000/box/plc/_enable'
 value.datatype=["enum", {'On':1,'Off':0}]
 target.datatype=["enum", {'On':1,'Off':0}]
 .description='Enables to Output of the Powersupply'
 .visibility='advanced'
 
-[device polarity]
+[module polarity]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://localhost:10000/box/plc/_polarity
+tangomodule=tango://localhost:10000/box/plc/_polarity
 value.datatype=["enum", {'+1':1,'0':0,'-1':-1}]
 target.datatype=["enum", {'+1':1,'0':0,'-1':-1}]
 .description=polarity (+/-) switch
@@ -43,9 +43,9 @@ target.datatype=["enum", {'+1':1,'0':0,'-1':-1}]
 comtries=50
 
 
-[device symmetry]
+[module symmetry]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://localhost:10000/box/plc/_symmetric
+tangomodule=tango://localhost:10000/box/plc/_symmetric
 value.datatype=["enum",{'symmetric':1,'short':0, 'asymmetric':-1}]
 target.datatype=["enum",{'symmetric':1,'short':0, 'asymmetric':-1}]
 .description=par/ser switch selecting (a)symmetric mode
@@ -53,37 +53,37 @@ target.datatype=["enum",{'symmetric':1,'short':0, 'asymmetric':-1}]
 	symmetric is ser, asymmetric is par
 .visibility=advanced
 
-[device T1]
+[module T1]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://localhost:10000/box/plc/_t1
+tangomodule=tango://localhost:10000/box/plc/_t1
 .description=Temperature1 of the coils system
 #warnlimits=(0, 50)
 value.unit='degC'
 
-[device T2]
+[module T2]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://localhost:10000/box/plc/_t2
+tangomodule=tango://localhost:10000/box/plc/_t2
 .description=Temperature2 of the coils system
 #warnlimits=(0, 50)
 value.unit='degC'
 
-[device T3]
+[module T3]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://localhost:10000/box/plc/_t3
+tangomodule=tango://localhost:10000/box/plc/_t3
 .description=Temperature3 of the coils system
 #warnlimits=(0, 50)
 value.unit='degC'
 
-[device T4]
+[module T4]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://localhost:10000/box/plc/_t4
+tangomodule=tango://localhost:10000/box/plc/_t4
 .description=Temperature4 of the coils system
 #warnlimits=(0, 50)
 value.unit='degC'
 
-[device currentsource]
+[module currentsource]
 class=secop_mlz.entangle.PowerSupply
-tangodevice=tango://localhost:10000/box/lambda/curr
+tangomodule=tango://localhost:10000/box/lambda/curr
 .description=Device for the magnet power supply (current mode)
 abslimits=(0,200)
 speed=1
@@ -94,9 +94,9 @@ voltage=10
 #unit=A
 .visibility=advanced
 
-[device mf]
+[module mf]
 class=secop_mlz.amagnet.GarfieldMagnet
-.description=magnetic field device, handling polarity switching and stuff
+.description=magnetic field module, handling polarity switching and stuff
 subdev_currentsource=currentsource
 subdev_enable=enable
 subdev_polswitch=polarity

etc/ccr12.cfg

@@ -13,37 +13,37 @@ bindport=10767
 framing=eol
 encoding=secop
 
-[device automatik]
+[module automatik]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://ccr12:10000/box/plc/_automatik
+tangomodule=tango://ccr12:10000/box/plc/_automatik
 mapping=dict(Off=0,p1=1,p2=2)
 
-[device compressor]
+[module compressor]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://ccr12:10000/box/plc/_cooler_onoff
+tangomodule=tango://ccr12:10000/box/plc/_cooler_onoff
 mapping=dict(Off=0,On=1)
 
-[device gas]
+[module gas]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://ccr12:10000/box/plc/_gas_onoff
+tangomodule=tango://ccr12:10000/box/plc/_gas_onoff
 mapping=dict(Off=0,On=1)
 
-[device vacuum]
+[module vacuum]
 class=secop_mlz.entangle.NamedDigitalOutput
-tangodevice=tango://ccr12:10000/box/plc/_vacuum_onoff
+tangomodule=tango://ccr12:10000/box/plc/_vacuum_onoff
 mapping=dict(Off=0,On=1)
 
-[device p1]
+[module p1]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://ccr12:10000/box/plc/_p1
+tangomodule=tango://ccr12:10000/box/plc/_p1
 
-[device p2]
+[module p2]
 class=secop_mlz.entangle.AnalogInput
-tangodevice=tango://ccr12:10000/box/plc/_p2
+tangomodule=tango://ccr12:10000/box/plc/_p2
 
-[device curve_p2]
+[module curve_p2]
 class=secop_mlz.entangle.NamedDigitalInput
-tangodevice=tango://ccr12:10000/box/plc/_curve
+tangomodule=tango://ccr12:10000/box/plc/_curve
 value.default='undefined'
 mapping=dict(curve1=1,curve2=2,curve3=3)
 

etc/cryo.cfg

@@ -14,7 +14,7 @@ framing=eol
 encoding=secop
 
 
-[device cryo]
+[module cryo]
 # some (non-defaut) module properties
 .group=very important/stuff
 .description=A simulated cc cryostat with heat-load, specific heat for the sample 

etc/demo.cfg

@@ -9,35 +9,35 @@ bindport=10767
 framing=eol
 encoding=secop
 
-[device heatswitch]
+[module heatswitch]
 class=secop_demo.modules.Switch
 switch_on_time=5
 switch_off_time=10
 
-[device mf]
+[module mf]
 class=secop_demo.modules.MagneticField
 heatswitch = heatswitch
 
-[device ts]
+[module ts]
 class=secop_demo.modules.SampleTemp
 sensor = 'Q1329V7R3'
 ramp = 4
 target = 10
 default = 10
 
-[device tc1]
+[module tc1]
 class=secop_demo.modules.CoilTemp
 sensor="X34598T7"
 
-[device tc2]
+[module tc2]
 class=secop_demo.modules.CoilTemp
 sensor="X39284Q8'
 
-[device label]
+[module label]
 class=secop_demo.modules.Label
 system=Cryomagnet MX15
 subdev_mf=mf
 subdev_ts=ts
 
-#[device vt]
+#[module vt]
 #class=secop_demo.modules.ValidatorTest

etc/epics.cfg

@@ -16,23 +16,23 @@ bindport=10767
 framing=eol
 encoding=secop
 
-[device tc1]
+[module tc1]
 class=secop_demo.demo.CoilTemp
 sensor="X34598T7"
 
-[device tc2]
+[module tc2]
 class=secop_demo.demo.CoilTemp
 sensor="X39284Q8'
 
 
-[device sensor1]
+[module sensor1]
 class=secop_ess.epics.EpicsReadable
 epics_version="v4"
 .group="Lakeshore336"
 value_pv="DEV:KRDG1"
 
 
-[device loop1]
+[module loop1]
 class=secop_ess.epics.EpicsTempCtrl
 epics_version="v4"
 .group="Lakeshore336"
@@ -42,14 +42,14 @@ target_pv="DEV:SETP_S1"
 heaterrange_pv="DEV:RANGE_S1"
 
 
-[device sensor2]
+[module sensor2]
 class=secop_ess.epics.EpicsReadable
 epics_version="v4"
 .group="Lakeshore336"
 value_pv="DEV:KRDG2"
 
 
-[device loop2]
+[module loop2]
 class=secop_ess.epics.EpicsTempCtrl
 epics_version="v4"
 .group="Lakeshore336"

etc/sim.cfg

@@ -12,7 +12,7 @@ framing=eol
 encoding=secop
 
 
-[device sim]
+[module sim]
 class=secop.simulation.SimDrivable
 .description=simulation stuff
 .extra_params=param3,param4,jitter,ramp

etc/sim_mlz_stressihtf2_v2.cfg

@@ -0,0 +1,79 @@
+[node stressihtf2]
+description = [sim] Stressihtf2 box of MLZ Sample environment group
+	.
+	Controls an High Temperature Furnace with an Eurotherm and an PLC controlling some valves and checking cooling water.
+
+meaning={'T_regulation':{'T':100}, 'T_sample':{'T_sample':100}}
+
+[interface tcp]
+interface=tcp
+bindto=0.0.0.0
+bindport=10767
+# protocol to use for this interface
+framing=eol
+encoding=secop
+
+[module T]
+class=secop.simulation.SimDrivable
+.description=Main temperature control node of Stressihtf2.
+value.unit='degC'
+value.default=20
+target.datatype=["double", 0, 2000]
+target.default=20
+target.unit='degC'
+.extra_params=ramp,regulationmode,abslimits,userlimits
+ramp.datatype=["double",0,600]
+ramp.description=target ramping speed in K/min.
+ramp.default=60
+ramp.unit=K/min
+abslimits.datatype=["tuple",[["double"],["double"]]]
+abslimits.default=[0,2000]
+abslimits.description=currently active absolute limits for the setpoint. depend on the regulationmode parameter (both/stick->0..600, tube->0..300K).
+abslimits.unit='degC'
+abslimits.readonly=True
+userlimits.datatype=["tuple",[["double"],["double"]]]
+userlimits.default=[0,300]
+userlimits.description=current user set limits for the setpoint. must be inside abslimits.
+userlimits.unit='degC'
+
+[module T_sample]
+class=secop.simulation.SimReadable
+.description=(optional) Sample temperature sensor.
+.visibility=expert
+value.default=300
+value.unit='degC'
+
+[module N2]
+class=secop.simulation.SimWritable
+.description=Switches the N2 gas inlet on or off.
+.visibility=expert
+value.default='off'
+value.datatype=["enum", {'off':0,'on':1}]
+target.datatype=["enum", {'off':0,'on':1}]
+target.default='off'
+
+[module He]
+class=secop.simulation.SimWritable
+.description=Switches the He gas inlet on or off.
+.visibility=expert
+value.default='off'
+value.datatype=["enum", {'off':0,'on':1}]
+target.datatype=["enum", {'off':0,'on':1}]
+target.default='off'
+
+[module lamps]
+class=secop.simulation.SimWritable
+.description=Switches the heating lamps on or off.
+.visibility=expert
+value.default='on'
+value.datatype=["enum", {'off':0,'on':1}]
+target.datatype=["enum", {'off':0,'on':1}]
+target.default='on'
+
+[module water_ok]
+class=secop.simulation.SimReadable
+.description=Readout of the cooling water state.
+.visibility=expert
+value.default='ok'
+value.datatype=["enum", {'failed':0,'ok':1}]
+

etc/test.cfg

@@ -17,26 +17,26 @@ framing=eol
 encoding=secop
 
 
-[device LN2]
+[module LN2]
 class=secop_demo.test.LN2
 
-[device heater]
+[module heater]
 class=secop_demo.test.Heater
 maxheaterpower=10
 
-[device T1]
+[module T1]
 class=secop_demo.test.Temp
 sensor="X34598T7"
 
-[device T2]
+[module T2]
 class=secop_demo.modules.CoilTemp
 sensor="X34598T8"
 
-[device T3]
+[module T3]
 class=secop_demo.modules.CoilTemp
 sensor="X34598T9"
 
 
-[device Lower]
+[module Lower]
 class=secop_demo.test.Lower