better dummy server for seaweb tests

- new config file dummy
- frappy_demo.test.Temp now creates WARN and ERROR status
  and may be disabled

Change-Id: Ibc7bb565f18c2c12cdc2a77bea1ee1bf1cc8bd41

cfg/dummy_cfg.py

@@ -0,0 +1,98 @@
+Node('test.config.frappy.demo',
+     '''short description of the testing sec-node
+
+This description for the node can be as long as you need if you use a multiline string.
+
+Very long!
+The needed fields are Equipment id (1st argument), description (this)
+ and the main interface of the node (3rd arg)
+''',
+     'tcp://10768',
+)
+
+Mod('attachtest',
+    'frappy_demo.test.WithAtt',
+    'test attached',
+    att = 'LN2',
+)
+
+Mod('pinata',
+    'frappy_demo.test.Pin',
+    'scan test',
+)
+
+Mod('recursive',
+    'frappy_demo.test.RecPin',
+    'scan test',
+)
+
+Mod('LN2',
+    'frappy_demo.test.LN2',
+    'random value between 0..100%',
+    value = Param(default = 0, unit = '%'),
+)
+
+Mod('heater',
+    'frappy_demo.test.Heater',
+    'some heater',
+    maxheaterpower = 10,
+)
+
+Mod('T1',
+    'frappy_demo.test.Temp',
+    'some temperature',
+    sensor = 'X34598T7',
+)
+
+Mod('T2',
+    'frappy_demo.test.Temp',
+    'some temperature',
+    sensor = 'X34598T8',
+)
+
+Mod('T3',
+    'frappy_demo.test.Temp',
+    'some temperature',
+    sensor = 'X34598T9',
+)
+
+Mod('Lower',
+    'frappy_demo.test.Lower',
+    'something else',
+)
+
+Mod('Decision',
+    'frappy_demo.test.Mapped',
+    'Random value from configured property choices. Config accepts anything ' \
+    'that can be converted to a list',
+    choices = ['Yes', 'Maybe', 'No'],
+)
+
+Mod('c',
+    'frappy_demo.test.Commands',
+    'a command test',
+)
+
+Mod('cryo',
+    'frappy_demo.cryo.Cryostat',
+    'A simulated cc cryostat with heat-load, specific heat for the sample and a '
+    'temperature dependent heat-link between sample and regulation.',
+    group='very important/stuff',
+    jitter=0.1,
+    T_start=10.0,
+    target=10.0,
+    looptime=1,
+    ramp=6,
+    maxpower=20.0,
+    heater=4.1,
+    mode='pid',
+    tolerance=0.1,
+    window=30,
+    timeout=900,
+    p = Param(40, unit='%/K'),  # in case 'default' is the first arg, we can omit 'default='
+    i = 10,
+    d = 2,
+    pid = Group('p', 'i', 'd'),
+    pollinterval = Param(export=False),
+    value = Param(unit = 'K', test = 'customized value'),
+)