Convert example configs to python

Fixes: #4627

Change-Id: I1049af9fa2f3f9ec06e55811dc9ecfa5f359c805

cfg/amagnet_cfg.py

@@ -0,0 +1,91 @@
+Node('MLZ_amagnet(Garfield)',
+    'MLZ-Amagnet\n'
+    '\n'
+    'Water cooled magnet from ANTARES@MLZ.\n'
+    '\n'
+    'Use module to control the magnetic field.\n'
+    'Don\'t forget to select symmetry first (can be moved only at zero field!).\n'
+    '\n'
+    'Monitor T1..T4 (Coil temps), if they get to hot, field will ramp down!\n'
+    '\n'
+    'In case of Problems, contact the ANTARES people at MLZ.',
+    'tcp://10767',
+    visibility = 'expert',
+    foo = 'bar',
+)
+
+Mod('enable',
+    'frappy_mlz.entangle.NamedDigitalOutput',
+    'Enables to Output of the Powersupply',
+    tangodevice = 'tango://localhost:10000/box/plc/_enable',
+    value = Param(datatype=["enum", {'On':1,'Off':0}]),
+    target = Param(datatype=["enum", {'On':1,'Off':0}]),
+    visibility = 'advanced',
+)
+
+Mod('polarity',
+    'frappy_mlz.entangle.NamedDigitalOutput',
+    'polarity (+/-) switch\n'
+    '\n'
+    'there is an interlock in the plc:\n'
+    'if there is current, switching polarity is forbidden\n'
+    'if polarity is short, powersupply is disabled',
+    tangodevice = 'tango://localhost:10000/box/plc/_polarity',
+    value = Param(datatype=["enum", {'+1':1,'0':0,'-1':-1}]),
+    target = Param(datatype=["enum", {'+1':1,'0':0,'-1':-1}]),
+    visibility = 'advanced',
+    comtries = 50,
+)
+
+Mod('symmetry',
+    'frappy_mlz.entangle.NamedDigitalOutput',
+    'par/ser switch selecting (a)symmetric mode\n'
+    '\n'
+    'symmetric is ser, asymmetric is par',
+    tangodevice = 'tango://localhost:10000/box/plc/_symmetric',
+    value = Param(datatype=["enum",{'symmetric':1,'short':0, 'asymmetric':-1}]),
+    target = Param(datatype=["enum",{'symmetric':1,'short':0, 'asymmetric':-1}]),
+    visibility = 'advanced',
+)
+
+for i in range(1,5):
+    Mod('T%d' % i,
+        'frappy_mlz.entangle.AnalogInput',
+        'Temperature %d of the coils system' % i,
+        tangodevice = 'tango://localhost:10000/box/plc/_t%d' % i,
+        #warnlimits=(0, 50),
+        value = Param(unit='degC'),
+    )
+
+Mod('currentsource',
+    'frappy_mlz.entangle.PowerSupply',
+    'Device for the magnet power supply (current mode)',
+    tangodevice = 'tango://localhost:10000/box/lambda/curr',
+    abslimits = (0,200),
+    speed = 1,
+    ramp = 60,
+    precision = 0.02,
+    current = 0,
+    voltage = 10,
+    #value=Param(unit='A')
+    visibility = 'advanced',
+)
+
+Mod('mf',
+    'frappy_mlz.amagnet.GarfieldMagnet',
+    'magnetic field module, handling polarity switching and stuff',
+    subdev_currentsource = 'currentsource',
+    subdev_enable = 'enable',
+    subdev_polswitch = 'polarity',
+    subdev_symmetry = 'symmetry',
+    target = Param(unit='T'),
+    value = Param(unit='T'),
+    userlimits = (-0.35, 0.35),
+    calibrationtable = {'symmetric':[0.00186517, 0.0431937, -0.185956, 0.0599757, 0.194042],
+    'short': [0.0, 0.0, 0.0, 0.0, 0.0],
+    'asymmetric':[0.00136154, 0.027454, -0.120951, 0.0495289, 0.110689]},
+    meaning = ['The magnetic field', 1],
+    #priority=100,
+    visibility = 'user',
+    abslimits = (-0.4,0.4,),
+)