import curves from sea

after add calibrange where appropriate

rxdil.inp

@@ -0,0 +1,62 @@
+sens=rxdil
+unit=mV          ! sensor format (mV,V,Ohm), log formats are choosen automatically
+!tlim=2         ! setpoint limit (automatic if omitted)
+type=Special    ! sensor type (Special,Si,GaAlAs,Pt250,Pt500,Pt2500,RhFe,C,Cernox,RuOx,Ge) (special if omitted)
+excit=30uA      ! (off,30nA,100nA,300nA,1uA,3uA,10uA,30uA,100uA,300uA,1mA,10mV,1mV) (if omitted: default from sensor type)
+range=2000      ! range in sensor units (if rang=0: determine range from table, if omitted: default from sensor type)
+curv            ! curve (volts, cKelvin)
+607.88  0.02
+593.99  0.021
+567.92  0.023
+543.86  0.025
+490.69  0.03
+445.36  0.035
+406.08  0.04
+371.81  0.045
+341.79  0.05
+254.67  0.07
+203.01  0.09
+170.69  0.11
+148.94  0.13
+133.29  0.15
+118.96  0.175
+108.21  0.20
+99.84  0.225
+93.09  0.25
+82.81  0.30
+75.29  0.35
+69.53  0.40
+64.95  0.45
+61.22  0.50
+55.49  0.60
+51.31  0.70
+48.11  0.80
+45.59  0.90
+43.56  1.00
+39.83  1.25
+37.29  1.50
+35.43  1.75
+34.01  2.00
+32.87  2.25
+31.94  2.50
+31.16  2.75
+30.50  3.00
+29.92  3.25
+29.42  3.50
+28.97  3.75
+28.57  4.00
+28.27  4.20
+27.45  5.00
+26.77  6.00
+25.82  8.00
+25.20  10.00
+24.60  13.00
+24.10  17.00
+23.71  22.00
+23.38  29.00
+23.15  37.00
+22.91  50.00
+22.75  67.00
+22.62  90.00
+22.51  120.00
+22.00  300.00