import curves from sea

after add calibrange where appropriate

ruox5k.inp

@@ -0,0 +1,76 @@
+sens=ruox5k
+unit=Ohm        ! sensor format (mV,V,Ohm), log formats are choosen automatical$
+!tlim=2         ! setpoint limit (automatic if omitted)
+type=Special    ! sensor type (Special,Si,GaAlAs,Pt250,Pt500,Pt2500,RhFe,C,Cern$
+form=loglog
+curv            ! curve (sensor,temp/K) follows, must be ordered, but can be in$
+5000	300
+5036	273
+5083	240
+5127	210
+5168	185
+5206	162
+5241	142
+5273	125
+5302	110
+5331.1	96.08
+5363.1	84.17
+5398.1	73.67
+5436.5	64.43
+5478.6	56.30
+5524.8	49.15
+5575.4	42.88
+5631.0	37.37
+5691.8	32.55
+5758.6	28.32
+5831.8	24.63
+5912.0	21.40
+6000.0	18.58
+6096.5	16.13
+6202.3	13.99
+6318.3	12.14
+6445.4	10.52
+6584.9	9.119
+6737.8	7.902
+6905.5	6.847
+7089.3	5.933
+7290.9	5.141
+7511.9	4.456
+7754.2	3.862
+8020.0	3.349
+8311.3	2.904
+8630.8	2.519
+8981.1	2.186
+9365.2	1.898
+9786.3	1.648
+10248.1	1.431
+10754.4	1.244
+11309.6	1.081
+11918.3	0.9393
+12585.8	0.8164
+13317.6	0.7094
+14120.1	0.6163
+15000.0	0.5353
+15964.8	0.4646
+17022.6	0.4029
+18182.6	0.3491
+19454.4	0.3020
+20848.9	0.2609
+22378.0	0.2249
+24054.6	0.1934
+25893.0	0.1659
+27908.7	0.1418
+30118.9	0.1208
+32542.3	0.1025
+35199.5	0.08652
+38113.1	0.07266
+41307.8	0.06065
+44810.7	0.05029
+48651.6	0.04140
+52863.0	0.03381
+57480.7	0.02736
+62544.0	0.02193
+68095.7	0.01739
+74183.1	0.01362
+80857.8	0.01054
+88176.4	0.00808