/****************************************************
Programmed during 2011-05-02 and 2011-07-29 for the
project ACM1219 as a microcontroller setup for the
ACM1219 interface
Designed and developed by Adrian Beckert
Contact: adrian.beckert@gmx.ch
*****************************************************/
#include <EEPROM.h>

byte values[159]={128,0,75,57,158,0,128,0,77,208,91,37,115,101,        //Values to write into the EEPROM
116,67,73,78,32,49,44,48,44,48,52,46,48,44,57,57,46,57,44,48,
44,57,57,46,57,44,57,57,46,57,0,115,101,116,76,73,77,73,84,32,
48,48,46,48,49,44,48,56,46,49,56,44,48,48,46,48,48,44,48,48,46,
48,48,0,0,1,128,0,75,57,158,0,128,0,77,208,91,37,115,101,
116,67,73,78,32,49,44,48,44,48,52,46,48,44,57,57,46,57,44,48,
44,57,57,46,57,44,57,57,46,57,0,115,101,116,76,73,77,73,84,32,
48,48,46,48,49,44,48,56,46,49,56,44,48,48,46,48,48,44,48,48,46,
48,48,0};


void setup(){
  Serial.begin(9600);
  for (byte i=0;i<158;i++){                                                //write values in EEPROM
    EEPROM.write(i,values[i]);
  }
  
  Serial.println("Please check:");
  Serial.println("Column 1: Values to write in EEPROM");
  Serial.println("Column 2: Values written in EEPROM");
  for (byte i=0;i<158;i++){                                                //print the values written into serial port
    Serial.print(i,DEC);
    Serial.print(": ");
    Serial.print(values[i],DEC);
    Serial.print("     ");
    Serial.println(EEPROM.read(i),DEC);
  }
  
  Serial.println("successful");
  Serial.println("Please close the serial port and load the file 'ACM1219_Interface_Rev01' on the Arduino microcontroller");
}

void loop(){
}