# This configures the MPF server stuff.
# "#!" marks lines that can be uncommented.

### START of IPAC R2.5 and below ##############################################
# 
# Initialize IP carrier

# For MVME162 and MVME172 CPU boards with IP slots.
# ipacAddCarrier(ipac_carrier_t *pcarrier, char *cardParams)
#   pcarrier   - pointer to carrier driver structure
#   cardParams - carrier-specific init parameters
#!carrier = "ipac"
#!ipacAddCarrier(&ipmv162, "A:l=3,3 m=0xe0000000,64;B:l=3,3 m=0xe0010000,64;C:l=3,3 m=0xe0020000,64;D:l=3,3 m=0xe0030000,64")

# For SBS VIPC616-01 IP carrier board.  A32 and A24 examples follow:
#!carrier = "VIPC616_01"
# - A32 addressing.
# - default I/O Base Address (0x6000).
# - IP modules occupy 32MB of memory from 0x9000 0000 to 0x91FF FFFF.
# - IP module A at 0x90000000,
#      module B at 0x90800000,
#      module C at 0x91000000,
#      module D at 0x91800000
#!ipacAddCarrier(&vipc616_01, "6000,A0000000")

# - A24 addressing.
# - default I/O Base Address (0x6000).
# - default IP module base address at 0x00D0 0000
#   occupies 512 bytes of memory from 0x00D0 0000 to 0x00D0 01FF.
# - IP module A at 0x0x00D0 007F,
#      module B at 0x0x00D0 0100,
#      module C at 0x0x00D0 017F,
#      module D at 0x0x00D0 01FF
#!ipacAddCarrier(&vipc616_01, "0x6000,D00000,128")

# initIpacCarrier(const char *carrierName, int carrierNum)
#!initIpacCarrier(carrier, 0)
#!ipacReport(2)

###############################################################################
# Initialize Octal UART module
#initOctalUART("moduleName","carrierName","carrierSite",nports,intVec)
#!initOctalUART("octalUart0",carrier,"IP_a",8,100)
#!initOctalUART("octalUart1",carrier,"IP_b",8,100)

# initOctalUARTPort(char* portName,char* moduleName,int port,int baud,
#                   char* parity,int stop_bits,int bits_char,char* flow_control)
# 'baud' is the baud rate. 1200, 2400, 4800, 9600, 19200, 38400
# 'parity' is "E" for even, "O" for odd, "N" for none.
# 'bits_per_character' = {5,6,7,8}
# 'stop_bits' = {1,2}
# 'flow_control' is "N" for none, "H" for hardware
# Port 0 is Generic Serial Record
#!initOctalUARTPort("UART0[0]","octalUart0",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[1]","octalUart0",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[2]","octalUart0",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[3]","octalUart0",3, 9600,"N",1,8,"N")

#!initOctalUARTPort("UART1[0]","octalUart1",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[1]","octalUart1",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[2]","octalUart1",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[3]","octalUart1",3, 9600,"N",1,8,"N")
### END of IPAC R2.5 and below ##############################################

### IPAC R2.6 and above #######################################################
# IPAC R2.6 and above
# Initialize IP carrier
# ipacAddVIPC616_01(const char *cardParams);
# ipacAddMVME162(const char *cardParams)
#!ipacAddVIPC616_01("6000,A0000000")
#!ipacAddMVME162("A:l=3,3 m=0xA0000000,64")

#!tyGSOctalDrv(1)

#!octalUart0 = tyGSOctalModuleInit("GSIP_OCTAL232", 0x80, 0, 0)

#!port0 = tyGSOctalDevCreate("/tyGS/0/0",octalUart0,0,1000,1000)
#!port1 = tyGSOctalDevCreate("/tyGS/0/1",octalUart0,1,1000,1000)

#!tyGSOctalConfig(port0,9600,'N',1,8,'N')
#!tyGSOctalConfig(port1,9600,'N',1,8,'N')

#!initTtyVxPort("UART0[0]","/tyGS/0/0",9600,1000)
#!initTtyVxPort("UART0[1]","/tyGS/0/1",9600,1000)
###############################################################################


#!initSerialServer("a-Serial[0]","UART0[0]",100,2,"")
#!initSerialServer("a-Serial[1]","UART0[1]",100,2,"")