# RELEASE - Location of external products
#
# (Architecture dependent declarations should go into RELEASE.<arch>)
#
# Note: This file will be scanned to automatically generate
#       include path definitions etc.
#       The order of the following declarations will be retained
#       within those definitions.
#
# Add your declarations here

#SUPPORT=/usr/local/epics/3.13.2/support

# Define the following if MPF is defined (i.e., if either serial
# or GPIB motor controller support is required).
#MPF_SERIAL=$(SUPPORT)/mpfSerial/mpfSerial1-2

# If the EPICS GPIB Module from Benjamin Franksen is used, then remove the '#'
# from the following and modify the motorApp/CommSrc/Makefile.Vx file per
# instructions found there.  If GPIB driver support is from EPICS base, then
# leave this line commented out.
#GPIB=$(SUPPORT)/gpib

# If any motor controller communication mechanism besides the VME backplane is
# required, then MPF must be defined.
#MPF=$(SUPPORT)/mpf/mpf1-6

#EPICS_BASE=$(SUPPORT)/base/3-13-4

# The following must be defined if motorExApp is to be built.
#TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
#MSITOP=/usr/local/epics/extensions

# The following must be defined if the "WithMPF" example in motorExApp is to
# be built.
#MPF_GPIB=$(SUPPORT)/mpfGpib/mpfGpib1-3