diff --git a/iocBoot/iocNoAsyn/st.cmd b/iocBoot/iocNoAsyn/st.cmd
deleted file mode 100644
index 37c4d79b..00000000
--- a/iocBoot/iocNoAsyn/st.cmd
+++ /dev/null
@@ -1,39 +0,0 @@
-# This example if for OMS VME8/44 controllers.  Since OMS controllers
-# communicate across the VME backplace, this example does not require
-# MPF.
-
-#The following must be added for many board support packages
-#cd "... IOC st.cmd complete directory path ... "
-
-< cdCommands
- 
-#< ../nfsCommands
-
-cd appbin
-
-# If the VxWorks kernel was built using the project facility, the following must
-# be added before any C++ code is loaded (see SPR #28980).
-sysCplusEnable=1
-
-ld < NoMPF.munch
-
-cd startup
-dbLoadDatabase("../../dbd/NoMPF.dbd")
-registerRecordDeviceDriver(pdbbase)
-
-dbLoadRecords("../../db/NoMPF.db")
-#dbLoadRecords("../../motorExApp/Db/SoftMotorEx.db","user=rls,motor=m1", startup)
-
-# OMS VME driver setup parameters: 
-#     (1)cards, (2)axes per card, (3)base address(short, 16-byte boundary), 
-#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
-#     (6)motor task polling rate (min=1Hz,max=60Hz)
-#omsSetup(1, 8, 0xFC00, 180, 5, 10)
-
-# OMS VME58 driver setup parameters: 
-#     (1)cards, (2)axes per card, (3)base address(short, 4k boundary), 
-#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
-#     (6)motor task polling rate (min=1Hz,max=60Hz)
-oms58Setup(1, 8, 0x1000, 190, 5, 10)
-
-iocInit
diff --git a/iocBoot/iocNoMPF/st.cmd b/iocBoot/iocNoMPF/st.cmd
deleted file mode 100644
index 37c4d79b..00000000
--- a/iocBoot/iocNoMPF/st.cmd
+++ /dev/null
@@ -1,39 +0,0 @@
-# This example if for OMS VME8/44 controllers.  Since OMS controllers
-# communicate across the VME backplace, this example does not require
-# MPF.
-
-#The following must be added for many board support packages
-#cd "... IOC st.cmd complete directory path ... "
-
-< cdCommands
- 
-#< ../nfsCommands
-
-cd appbin
-
-# If the VxWorks kernel was built using the project facility, the following must
-# be added before any C++ code is loaded (see SPR #28980).
-sysCplusEnable=1
-
-ld < NoMPF.munch
-
-cd startup
-dbLoadDatabase("../../dbd/NoMPF.dbd")
-registerRecordDeviceDriver(pdbbase)
-
-dbLoadRecords("../../db/NoMPF.db")
-#dbLoadRecords("../../motorExApp/Db/SoftMotorEx.db","user=rls,motor=m1", startup)
-
-# OMS VME driver setup parameters: 
-#     (1)cards, (2)axes per card, (3)base address(short, 16-byte boundary), 
-#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
-#     (6)motor task polling rate (min=1Hz,max=60Hz)
-#omsSetup(1, 8, 0xFC00, 180, 5, 10)
-
-# OMS VME58 driver setup parameters: 
-#     (1)cards, (2)axes per card, (3)base address(short, 4k boundary), 
-#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
-#     (6)motor task polling rate (min=1Hz,max=60Hz)
-oms58Setup(1, 8, 0x1000, 190, 5, 10)
-
-iocInit