# RELEASE - Location of external products
#
# Note: This file will be scanned to automatically generate
#       include path definitions etc.
#       The order of the following declarations will be retained
#       within those definitions.
#
# Note that "#!" marks lines that can be uncommented.
#
# Add your declarations here

SUPPORT=
-include $(TOP)/../configure/SUPPORT.$(EPICS_HOST_ARCH)

# If any motor controller communication mechanism besides the VME backplane is
# required, then ASYN must be defined.
# Recommended ASYN release: R4-21
ASYN=$(SUPPORT)/asyn/R4-21

# Need the sequencer and the bust record for the MM4005 and XPS trajectory scanning
# Recommended SNCSEQ release: R2-1-12
SNCSEQ=$(SUPPORT)/seq/2-1-12
# Recommended BUSY release: R1-5
BUSY=$(SUPPORT)/busy/R1-5

# Recommended EPICS release: R3.14.12.1
EPICS_BASE=
-include $(TOP)/../configure/EPICS_BASE.$(EPICS_HOST_ARCH)

# The following must be defined for the MXmotor device driver.
#!MX=$(SUPPORT)/mx/mx

# The following support modules are required for the Hytec driver and for the examples in
# <motor>/motorExApp.  To build examples, the top Makefile,
# <motor>/Makefile must also be edited.

# Recommended IPAC release: R2-11
IPAC=$(SUPPORT)/ipac/R2-11

# The following is only needed for the motor examples in iocBoot.
#!MOTOR=$(TOP)

