diff --git a/iocBoot/Makefile b/iocBoot/Makefile
deleted file mode 100644
index d097ef0..0000000
--- a/iocBoot/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-TOP = ..
-include $(TOP)/configure/CONFIG
-DIRS += $(wildcard *ioc*)
-DIRS += $(wildcard as*)
-include $(EPICS_BASE)/configure/RULES_DIRS
-
diff --git a/iocBoot/NeXus_templates.xsd b/iocBoot/NeXus_templates.xsd
deleted file mode 100755
index 5ee491f..0000000
--- a/iocBoot/NeXus_templates.xsd
+++ /dev/null
@@ -1,269 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-  ########### SVN repository information ###################
-  # $Date$
-  # $Author$
-  # $Revision$
-  # $HeadURL$
-  # $Id$
-  ########### SVN repository information ###################
--->
-
-<!--
-    Use of this XML Schema file is deprecated.
-    Instead, use the Schematron file:  template.sch
-    Schematron:
-        allows arbitrary element names
-        allows arbitrary UserGroup names
-        enforces one signal="1" attribute per NXdata group
-        cannot apply a regexp match for the allowed names
-      
--->
-
-<!--  usage:
-  xmllint - -noout - -schema /path1/NeXus_templates.xsd /path2/NX_template_file.xml
-  (put the two minus signs together for the actual command, 
-  XML can't have them together in an XML file, even in a comment!
-  
-  Note:  This XML Schema validates the example files as-written in areaDetector 
-  but is not sufficient for general use.  It may be removed in future areaDetector releases.
--->
-
-
-<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
-  <xs:element name="NXroot" >
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element ref="Facility" minOccurs="0">
-          <xs:annotation>
-            <xs:documentation>
-              Facility is a legacy group from APS's CCDImageServer.
-              It is not a NeXus group and is used only by some custom at APS.
-              Not recommended for new projects.
-            </xs:documentation>
-          </xs:annotation>
-        </xs:element>
-        <xs:element ref="NXentry" maxOccurs="unbounded"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="Facility">
-    <!-- legacy group from CCDImageServer, not a NeXus group and ignored -->
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="facility_name" type="commonElement"/>
-        <xs:element name="facility_sector" type="commonElement"/>
-        <xs:element name="facility_beamline" type="commonElement"/>
-        <xs:element name="facility_station" type="commonElement"/>
-        <xs:element name="facility_float" type="commonElement"/>
-        <xs:element name="facility_int" type="commonElement"/>
-      </xs:sequence>
-      <xs:attribute name="type" use="required" fixed="UserGroup"/>
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXentry">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="title" type="commonElement"/>
-        <xs:element name="experiment_identifier" type="commonElement"/>
-        <xs:element name="experiment_description" type="commonElement"/>
-        <xs:element name="experiment_documentation" type="commonElement"/>
-        <xs:element name="collection_identifier" type="commonElement"/>
-        <xs:element name="collection_description" type="commonElement"/>
-        <xs:element name="entry_identifier" type="commonElement"/>
-        <xs:element name="definition" type="commonElement"/>
-        <xs:element name="start_time" type="commonElement"/>
-        <xs:element name="end_time" type="commonElement"/>
-        <xs:element name="duration" type="commonElement"/>
-        <xs:element name="collection_time" type="commonElement"/>
-        <xs:element name="run_cycle" type="commonElement"/>
-        <xs:element name="program_name" type="commonElement"/>
-        <xs:element name="revision" type="commonElement"/>
-        <xs:element name="notes" type="commonElement"/>
-        <xs:element ref="NXuser" minOccurs="0"/>
-        <xs:element ref="NXdata" minOccurs="1" maxOccurs="unbounded"/>
-        <xs:element ref="NXinstrument" minOccurs="0"/>
-        <xs:element ref="NXcollection" minOccurs="0"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXuser">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="name" type="commonElement"/>
-        <xs:element name="role" type="commonElement"/>
-        <xs:element name="affiliation" type="commonElement"/>
-        <xs:element name="address" type="commonElement"/>
-        <xs:element name="telephone_number" type="commonElement"/>
-        <xs:element name="fax_number" type="commonElement"/>
-        <xs:element name="email" type="commonElement"/>
-        <xs:element name="facility_user_id" type="commonElement"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXdata">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="maxSizeX" type="commonElement"/>
-        <xs:element name="maxSizeY" type="commonElement"/>
-        <xs:element name="make" type="commonElement"/>
-        <xs:element name="model" type="commonElement"/>
-        <xs:element name="ImageCounter" type="commonElement" minOccurs="0" />
-        <!-- TODO: special attention needed here
-          This sets the name of the data to "data" which is not required by NeXus.
-          Also, it is necessary to require a signal="1" attribute definition
-          for only one dataset in the NXdata group:
-          <Attr name="signal" type="CONST" outtype="NX_CHAR">1</Attr>
-          
-          Perhaps we need to switch from XML Schema to Schematron to validate template.xml files?
-        -->
-        <xs:element name="data" type="dataElement"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXinstrument">
-    <xs:complexType>
-      <xs:sequence minOccurs="0">
-        <xs:element ref="NXinsertion_device"/>
-        <xs:element ref="NXsource"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXinsertion_device">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="type" type="commonElement"/>
-        <xs:element name="energy" type="commonElement"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXsource">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="name" type="commonElement"/>
-        <xs:element name="type" type="commonElement"/>
-        <xs:element name="probe" type="commonElement"/>
-        <xs:element name="current" type="commonElement"/>
-        <xs:element name="top_up" type="commonElement"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="NXcollection">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element name="beamline" type="commonElement"/>
-      </xs:sequence>
-      <xs:attribute name="name" type="type_NeXus_name" />
-    </xs:complexType>
-  </xs:element>
-  
-  <!-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -->
-  
-  <xs:complexType name="commonElement" mixed="true">
-    <xs:group ref="Attr_group"/>
-    <xs:attributeGroup ref="common_attributes"/>
-  </xs:complexType>
-  
-  <xs:complexType name="dataElement" mixed="true">
-    <xs:group ref="Attr_group"/>
-    <xs:attributeGroup ref="data_attributes"/>
-  </xs:complexType>
-  
-  <xs:attributeGroup name="common_attributes">
-    <xs:attribute name="name" type="type_NeXus_name"/>
-    <xs:attribute name="outtype" type="type_outtype"/>
-    <xs:attribute name="source" type="type_source"/>
-    <xs:attribute name="type" type="type_basic_values"/>
-  </xs:attributeGroup>
-  
-  <xs:attributeGroup name="data_attributes">
-    <xs:attribute name="name" type="type_NeXus_name"/>
-    <xs:attribute name="outtype" type="type_outtype"/>
-    <xs:attribute name="source" type="type_source"/>
-    <xs:attribute name="type" type="type_basic_values_and_pArray"/>
-  </xs:attributeGroup>
-  
-  <xs:group name="Attr_group">
-    <xs:sequence>
-      <xs:element name="Attr" minOccurs="0" maxOccurs="unbounded">
-        <xs:complexType mixed="true">
-          <xs:attributeGroup ref="common_attributes"/>
-        </xs:complexType>
-      </xs:element>
-    </xs:sequence>
-  </xs:group>
-  
-  <!-- There are only two kinds values allowed for the "type" attribute -->
-  
-  <xs:simpleType name="type_basic_values_and_pArray">
-    <xs:union memberTypes="type_pArray type_ATTR type_CONST type_ND_ATTR"/>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_basic_values">
-    <xs:union memberTypes="type_ATTR type_CONST type_ND_ATTR"/>
-  </xs:simpleType>
-  
-  <!-- These definitions look simplistic, here's why:
-    Define each term here with the text appearing only once,
-    then every instance using the definition can be validated
-    for correct spelling.
-  -->
-  <xs:simpleType name="type_pArray">
-    <xs:restriction base="xs:string">
-      <xs:enumeration value="pArray"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_ATTR">
-    <xs:restriction base="xs:string">
-      <xs:enumeration value="ATTR"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_CONST">
-    <xs:restriction base="xs:string">
-      <xs:enumeration value="CONST"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_ND_ATTR">
-    <xs:restriction base="xs:string">
-      <xs:enumeration value="ND_ATTR"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_source">
-    <!-- must match rule for "name" attribute in attributes.xsd -->
-    <xs:restriction base="xs:token">
-      <xs:pattern value="[A-Za-z_][\w_]*" />
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_outtype">
-    <xs:list itemType="xs:string"/>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_NeXus_name">
-    <xs:restriction base="xs:token">
-      <xs:pattern value="[A-Za-z_][\w_]*" /> <!-- NeXus restrictions to HDF5 naming rule -->
-      <xs:maxLength value="63" /> <!-- HDF5 rule -->
-    </xs:restriction>
-  </xs:simpleType>
-
-</xs:schema>
diff --git a/iocBoot/attributes.xsd b/iocBoot/attributes.xsd
deleted file mode 100644
index eb5f4d6..0000000
--- a/iocBoot/attributes.xsd
+++ /dev/null
@@ -1,213 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-########### SVN repository information ###################
-# $Date$
-# $Author$
-# $Revision$
-# $HeadURL$
-# $Id$
-########### SVN repository information ###################
--->
-
-<!--  usage:
-   xmllint - -noout - -schema /path1/attributes.xsd /path2/attributes.xml
-   (put the two minus signs together for the actual command, 
-   XML can't have them together in an XML file, even in a comment!
-   
-   see ADApp/ADSrc/asynNDArrayDriver.cpp for the rules implemented here
--->
-
-
-<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
-
-  <xs:element name="Attributes">
-    <xs:complexType>
-      <xs:sequence>
-        <xs:element maxOccurs="unbounded" ref="Attribute"/>
-      </xs:sequence>
-    </xs:complexType>
-  </xs:element>
-
-  <xs:element name="Attribute">
-    <xs:annotation>
-      <xs:documentation>
-        Each NDAttribute (currently either PVAttribute or paramAttribute, other types may be added in the future) 
-        is defined with an <b>Attribute</b> tag. 
-        (N.B.: Unfortunately there are 2 meanings of attribute here: the NDAttribute and the XML attribute)
-        For each Attribute declaration, there are a number of XML attributes.
-        XML attributes have the syntax name="value".  
-        <!-- This next is a choice for our XML files, not a general rule for all XML files. -->
-        The XML attribute names are case-sensitive and must be lower case, i.e. name="xxx", not NAME="xxx".  
-        The XML attribute values are specified by the XML Schema and are always
-        uppercase for datatype and dbrtype attributes.
-      </xs:documentation>
-    </xs:annotation>
-    <xs:complexType>
-      <xs:attributeGroup ref="common_attributes"/>
-      <!-- only two types here: PARAM or EPICS_PV, each requires a different attribute -->
-      <xs:attribute name="type" use="required">
-        <xs:simpleType>
-          <xs:restriction base="xs:string">
-            <xs:enumeration value="PARAM"/>
-            <xs:enumeration value="EPICS_PV"/>
-          </xs:restriction>
-        </xs:simpleType>
-      </xs:attribute>
-      <!-- see ADApp/ADSrc/asynNDArrayDriver.cpp for the rules -->
-      <xs:attribute name="datatype" type="allowed_datatypes" default="INT">
-        <!-- only for type="PARAM" -->
-        <xs:annotation>
-          <xs:documentation>
-            Declares the parameter data type for type="PARAM".
-      	    It must match the actual data type in the driver 
-      	    or plugin parameter library.
-          </xs:documentation>
-        </xs:annotation>
-      </xs:attribute>
-      <xs:attribute name="addr" type="xs:string" default="0">
-        <!-- only for type="PARAM" -->
-        <xs:annotation>
-          <xs:documentation>
-            Declares the asyn addr (address) for type="PARAM".
-          </xs:documentation>
-        </xs:annotation>
-      </xs:attribute>
-      <xs:attribute name="dbrtype" type="allowed_dbrtypes" default="DBR_NATIVE">
-        <!-- only for type="EPICS_PV" -->
-        <xs:annotation>
-          <xs:documentation>
-            Declares the data type that will be used to read an 
-            EPICS Process Variable value with Channel Access.
-          </xs:documentation>
-        </xs:annotation>
-      </xs:attribute>
-    </xs:complexType>
-  </xs:element>
-  
-  <xs:attributeGroup name="common_attributes">
-    <xs:attribute name="description" default="">
-      <xs:annotation>
-        <xs:documentation>
-          words to explain this information
-        </xs:documentation>
-      </xs:annotation>
-    </xs:attribute>
-    <xs:attribute name="name" use="required">
-      <!-- must match rule for "source" attribute in NeXus_templates.xsd -->
-      <xs:annotation>
-        <xs:documentation>
-          One-word mnemonic reference that determines the name of the NDAttribute.  
-          It is required, must be unique, is case-insensitive, and must start with a letter.
-          It can include only letters, numbers and underscore. (No whitespace or other punctuation.)
-        </xs:documentation>
-      </xs:annotation>
-      <xs:simpleType>
-        <xs:restriction base="xs:token">
-          <xs:pattern value="[A-Za-z_][\w_]*" />
-        </xs:restriction>
-      </xs:simpleType>
-    </xs:attribute>
-    <xs:attribute name="source" use="required" type="type_source">
-      <xs:annotation>
-        <xs:documentation>
-          Declares the source of the NDAttribute.  It is required. 
-          If type="EPICS_PV" then this is the name of the EPICS PV, 
-          which is case-sensitive. 
-          If type="PARAM" then this is the drvInfo string that is 
-          used in EPICS database files (e.g. ADBase.template) 
-          to identify this parameter.  This must be identical with
-		  the declaration in the source code.  
-		  Use uppercase letters or numbers or underline.
-		  Must start with an uppercase letter.
-          <!-- 
-            This could be restricted to an enumeration of allowed PARAM parameters (too many .h files to search)
-			   xs:pattern value="[A-Z][A-Z0-9_]*" 
-            or a regular expression for EPICS PV names (if that is possible).
-			xs:pattern value="+++ what is the pattern? +++"
-            Either way, it _should_ be restricted to not allow whitespace.
-          --> 
-        </xs:documentation>
-      </xs:annotation>
-    </xs:attribute>
-  </xs:attributeGroup>
-  
-  <xs:simpleType name="allowed_datatypes">
-    <xs:annotation>
-      <xs:documentation>
-        Data type that will be used to read an EPICS_PV value with channel access
-        Data types allowed in the driver or plugin parameter library, 
-        and must be "INT", "DOUBLE", or "STRING" (uppercase only). 
-      </xs:documentation>
-    </xs:annotation>
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="DOUBLE" />
-      <xs:enumeration value="STRING" />
-      <xs:enumeration value="INT">
-        <xs:annotation>
-          <xs:documentation>
-            (default) use integer data type
-          </xs:documentation>
-        </xs:annotation>
-      </xs:enumeration>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="allowed_dbrtypes">
-    <xs:annotation>
-      <xs:documentation>
-        Data type that will be used to read an EPICS_PV value with channel access.
-        The allowed values are all uppercase only.
-      </xs:documentation>
-    </xs:annotation>
-    <xs:restriction base="xs:token">
-      <xs:enumeration value="DBR_CHAR" />
-      <xs:enumeration value="DBR_DOUBLE" />
-      <xs:enumeration value="DBR_ENUM" />
-      <xs:enumeration value="DBR_FLOAT" />
-      <xs:enumeration value="DBR_INT" />
-      <xs:enumeration value="DBR_LONG" />
-      <xs:enumeration value="DBR_SHORT" />
-      <xs:enumeration value="DBR_STRING" />
-      <xs:enumeration value="DBR_NATIVE">
-        <xs:annotation>
-          <xs:documentation>
-            (default) use native Channel Access data type
-          </xs:documentation>
-        </xs:annotation>
-      </xs:enumeration>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_source">
-    <!-- EPICS PV name rules
-      see: http://www.aps.anl.gov/epics/wiki/index.php/RRM_3-14_Concepts#Database_Addresses
-      The record name can be a mix of the following: 
-      a-z A-Z 0-9 _ - : . [ ] < > ;
-      The field name is always upper case. 
-      
-      full regular expression: [\w_\-:.[\]<>;]+([.][A-Z0-9]+)?
-      BUT, cannot express "<" in XML, must use &lt; but that won't parse!
-      So, use use a reduced (but very likely) subset of rules.  
-      Do not allow these symbols: []<>
-    -->
-    <xs:union memberTypes="type_EPICS_PV_source type_PARAM_source"/>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_EPICS_PV_source">
-    <xs:restriction base="xs:NMTOKEN">
-      <xs:pattern value="[\w_\-:.;]+([.][A-Z0-9]+)?"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-  <xs:simpleType name="type_PARAM_source">
-    <!-- All the ND parameters listed in the various .h files in the source code
-      appear to follow the pattern of all uppercase plus numbers and the underline.
-      This may not be a rule but it seems to be common practice.  Here, we make it a rule.
-    -->
-    <xs:restriction base="xs:NMTOKEN">
-      <xs:pattern value="[A-Z0-9_]+"/>
-    </xs:restriction>
-  </xs:simpleType>
-  
-</xs:schema>
diff --git a/iocBoot/commonPlugins.cmd b/iocBoot/commonPlugins.cmd
deleted file mode 100644
index ed157ae..0000000
--- a/iocBoot/commonPlugins.cmd
+++ /dev/null
@@ -1,113 +0,0 @@
-# Create a netCDF file saving plugin.
-NDFileNetCDFConfigure("FileNetCDF1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=netCDF1:,PORT=FileNetCDF1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=netCDF1:,PORT=FileNetCDF1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileNetCDF.template","P=$(PREFIX),R=netCDF1:,PORT=FileNetCDF1,ADDR=0,TIMEOUT=1")
-
-# Create a TIFF file saving plugin
-NDFileTIFFConfigure("FileTIFF1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=TIFF1:,PORT=FileTIFF1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=TIFF1:,PORT=FileTIFF1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileTIFF.template",  "P=$(PREFIX),R=TIFF1:,PORT=FileTIFF1,ADDR=0,TIMEOUT=1")
-
-# Create a JPEG file saving plugin
-NDFileJPEGConfigure("FileJPEG1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=JPEG1:,PORT=FileJPEG1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=JPEG1:,PORT=FileJPEG1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileJPEG.template",  "P=$(PREFIX),R=JPEG1:,PORT=FileJPEG1,ADDR=0,TIMEOUT=1")
-
-# Create a NeXus file saving plugin
-NDFileNexusConfigure("FileNexus1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Nexus1:,PORT=FileNexus1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=Nexus1:,PORT=FileNexus1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileNexus.template", "P=$(PREFIX),R=Nexus1:,PORT=FileNexus1,ADDR=0,TIMEOUT=1")
-
-# Create an HDF5 file saving plugin
-NDFileHDF5Configure("FileHDF1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=HDF1:,PORT=FileHDF1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=HDF1:,PORT=FileHDF1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileHDF5.template",  "P=$(PREFIX),R=HDF1:,PORT=FileHDF1,ADDR=0,TIMEOUT=1")
-
-# Create a Magick file saving plugin
-NDFileMagickConfigure("FileMagick1", $(QSIZE), 0, "$(PORT)", 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Magick1:,PORT=FileMagick1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=Magick1:,PORT=FileMagick1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFileMagick.template","P=$(PREFIX),R=Magick1:,PORT=FileMagick1,ADDR=0,TIMEOUT=1")
-
-# Create 4 ROI plugins
-NDROIConfigure("ROI1", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=ROI1:,  PORT=ROI1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDROI.template",       "P=$(PREFIX),R=ROI1:,  PORT=ROI1,ADDR=0,TIMEOUT=1")
-NDROIConfigure("ROI2", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=ROI2:,  PORT=ROI2,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDROI.template",       "P=$(PREFIX),R=ROI2:,  PORT=ROI2,ADDR=0,TIMEOUT=1")
-NDROIConfigure("ROI3", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=ROI3:,  PORT=ROI3,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDROI.template",       "P=$(PREFIX),R=ROI3:,  PORT=ROI3,ADDR=0,TIMEOUT=1")
-NDROIConfigure("ROI4", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=ROI4:,  PORT=ROI4,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDROI.template",       "P=$(PREFIX),R=ROI4:,  PORT=ROI4,ADDR=0,TIMEOUT=1")
-
-# Create a processing plugin
-NDProcessConfigure("PROC1", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Proc1:,  PORT=PROC1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDProcess.template",   "P=$(PREFIX),R=Proc1:,  PORT=PROC1,ADDR=0,TIMEOUT=1")
-
-# Create 5 statistics plugins
-NDStatsConfigure("STATS1", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Stats1:,  PORT=STATS1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=ROI1,NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStats.template",     "P=$(PREFIX),R=Stats1:,  PORT=STATS1,ADDR=0,TIMEOUT=1,HIST_SIZE=256,XSIZE=$(XSIZE),YSIZE=$(YSIZE),NCHANS=$(NCHANS)")
-NDStatsConfigure("STATS2", $(QSIZE), 0, "ROI1", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Stats2:,  PORT=STATS2,ADDR=0,TIMEOUT=1,NDARRAY_PORT=ROI2,NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStats.template",     "P=$(PREFIX),R=Stats2:,  PORT=STATS2,ADDR=0,TIMEOUT=1,HIST_SIZE=256,XSIZE=$(XSIZE),YSIZE=$(YSIZE),NCHANS=$(NCHANS)")
-NDStatsConfigure("STATS3", $(QSIZE), 0, "ROI2", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Stats3:,  PORT=STATS3,ADDR=0,TIMEOUT=1,NDARRAY_PORT=ROI3,NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStats.template",     "P=$(PREFIX),R=Stats3:,  PORT=STATS3,ADDR=0,TIMEOUT=1,HIST_SIZE=256,XSIZE=$(XSIZE),YSIZE=$(YSIZE),NCHANS=$(NCHANS)")
-NDStatsConfigure("STATS4", $(QSIZE), 0, "ROI3", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Stats4:,  PORT=STATS4,ADDR=0,TIMEOUT=1,NDARRAY_PORT=ROI4,NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStats.template",     "P=$(PREFIX),R=Stats4:,  PORT=STATS4,ADDR=0,TIMEOUT=1,HIST_SIZE=256,XSIZE=$(XSIZE),YSIZE=$(YSIZE),NCHANS=$(NCHANS)")
-NDStatsConfigure("STATS5", $(QSIZE), 0, "ROI4", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Stats5:,  PORT=STATS5,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStats.template",     "P=$(PREFIX),R=Stats5:,  PORT=STATS5,ADDR=0,TIMEOUT=1,HIST_SIZE=256,XSIZE=$(XSIZE),YSIZE=$(YSIZE),NCHANS=$(NCHANS)")
-
-# Create a transform plugin
-NDTransformConfigure("TRANS1", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Trans1:,  PORT=TRANS1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDTransform.template", "P=$(PREFIX),R=Trans1:,  PORT=TRANS1,ADDR=0,TIMEOUT=1")
-
-# Create an overlay plugin with 8 overlays
-NDOverlayConfigure("OVER1", $(QSIZE), 0, "$(PORT)", 0, 8, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template","P=$(PREFIX),R=Over1:, PORT=OVER1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlay.template",   "P=$(PREFIX),R=Over1:, PORT=OVER1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:1:,NAME=ROI1,   SHAPE=1,O=Over1:,XPOS=$(PREFIX)ROI1:MinX_RBV,YPOS=$(PREFIX)ROI1:MinY_RBV,XSIZE=$(PREFIX)ROI1:SizeX_RBV,YSIZE=$(PREFIX)ROI1:SizeY_RBV,PORT=OVER1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:2:,NAME=ROI2,   SHAPE=1,O=Over1:,XPOS=$(PREFIX)ROI2:MinX_RBV,YPOS=$(PREFIX)ROI2:MinY_RBV,XSIZE=$(PREFIX)ROI2:SizeX_RBV,YSIZE=$(PREFIX)ROI2:SizeY_RBV,PORT=OVER1,ADDR=1,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:3:,NAME=ROI3,   SHAPE=1,O=Over1:,XPOS=$(PREFIX)ROI3:MinX_RBV,YPOS=$(PREFIX)ROI3:MinY_RBV,XSIZE=$(PREFIX)ROI3:SizeX_RBV,YSIZE=$(PREFIX)ROI3:SizeY_RBV,PORT=OVER1,ADDR=2,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:4:,NAME=ROI4,   SHAPE=1,O=Over1:,XPOS=$(PREFIX)ROI4:MinX_RBV,YPOS=$(PREFIX)ROI4:MinY_RBV,XSIZE=$(PREFIX)ROI4:SizeX_RBV,YSIZE=$(PREFIX)ROI4:SizeY_RBV,PORT=OVER1,ADDR=3,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:5:,NAME=Cursor1,SHAPE=1,O=Over1:,XPOS=junk,                  YPOS=junk,                  XSIZE=junk,                   YSIZE=junk,                   PORT=OVER1,ADDR=4,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:6:,NAME=Cursor2,SHAPE=1,O=Over1:,XPOS=junk,                  YPOS=junk,                  XSIZE=junk,                   YSIZE=junk,                   PORT=OVER1,ADDR=5,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:7:,NAME=Box1,   SHAPE=1,O=Over1:,XPOS=junk,                  YPOS=junk,                  XSIZE=junk,                   YSIZE=junk,                   PORT=OVER1,ADDR=6,TIMEOUT=1")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDOverlayN.template","P=$(PREFIX),R=Over1:8:,NAME=Box2,   SHAPE=1,O=Over1:,XPOS=junk,                  YPOS=junk,                  XSIZE=junk,                   YSIZE=junk,                   PORT=OVER1,ADDR=7,TIMEOUT=1")
-
-# Create 2 color conversion plugins
-NDColorConvertConfigure("CC1", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template",   "P=$(PREFIX),R=CC1:,  PORT=CC1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDColorConvert.template", "P=$(PREFIX),R=CC1:,  PORT=CC1,ADDR=0,TIMEOUT=1")
-NDColorConvertConfigure("CC2", $(QSIZE), 0, "$(PORT)", 0, 0, 0)
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template",   "P=$(PREFIX),R=CC2:,  PORT=CC2,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$(PORT),NDARRAY_ADDR=0")
-dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDColorConvert.template", "P=$(PREFIX),R=CC2:,  PORT=CC2,ADDR=0,TIMEOUT=1")
-
-# Load scan records
-dbLoadRecords("$(SSCAN)/sscanApp/Db/scan.db", "P=$(PREFIX),MAXPTS1=2000,MAXPTS2=200,MAXPTS3=20,MAXPTS4=10,MAXPTSH=10")
-
-# Load sseq record for acquisition sequence
-dbLoadRecords("$(CALC)/calcApp/Db/yySseq.db", "P=$(PREFIX), S=AcquireSequence")
-
-set_requestfile_path("./")
-set_requestfile_path("$(AREA_DETECTOR)/ADApp/Db")
-set_requestfile_path("$(CALC)/calcApp/Db")
-set_requestfile_path("$(SSCAN)/sscanApp/Db")
-set_savefile_path("./autosave")
-set_pass0_restoreFile("auto_settings.sav")
-set_pass1_restoreFile("auto_settings.sav")
-save_restoreSet_status_prefix("$(PREFIX)")
-dbLoadRecords("$(AUTOSAVE)/asApp/Db/save_restoreStatus.db", "P=$(PREFIX)")
diff --git a/iocBoot/template.sch b/iocBoot/template.sch
deleted file mode 100755
index 4f9eeb4..0000000
--- a/iocBoot/template.sch
+++ /dev/null
@@ -1,155 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-    ########### SVN repository information ###################
-    # $Date$
-    # $Author$
-    # $Revision$
-    # $HeadURL$
-    # $Id$
-    ########### SVN repository information ###################
--->
-
-<!--  usage:
-    xmllint - -schematron /path1/template.sch /path2/NX_template_file.xml
-    (put the two minus signs together for the actual command, 
-    XML can't have them together in an XML file, even in a comment!
-    
-    TODO:  under development
--->
-
-<schema xmlns="http://purl.oclc.org/dsdl/schematron">
-    
-    <title>validate EPICS areaDetector NeXus template file</title>
-    
-    <!--  
-        RULES
-        ================
-        
-        + rule is implemented below
-        ~ rule is approximated below
-        ! rule is implied but not restricted
-        
-        
-        !Element names can be chosen by user (any)
-        ~group elements contain groups and datasets and have a name attribute or type="UserGroup" attribute
-        group names are either NeXus names or non-NeXus names
-        ~datasets contain optional Attr elements and optional constant text
-        datasets
-            +source  (required if type="ND_ATTR")
-            type
-            outtype
-        +NeXus template files have "NXroot" as the root element
-        +"NXentry" is the child element of "NXroot"
-        +Non-NeXus groups (does not start with "NX") must have a type="UserGroup" attribute
-        !Non-NeXus groups can be anywhere.
-        +Each NeXus group must have a "name" attribute
-        Each NXentry must have a unique name.
-        +Each NXentry must have a "NXdata" group.
-        +Each NXdata must have one and only one dataset with attribute signal="1"
-        For "name" attributes:
-            +must be less than 64 characters
-            ~each must match the NeXus regexp:  [A-Za-z_][\w_]*
-            each must be unique within the same HDF level
-            some NeXus group names are not yet known to areaDetector, so use type="UserGroup" attribute for them
-    -->
-    
-    <pattern id="name_regexp">
-        <!-- Validate the name rules -->
-        <rule context="*/@name">
-            <assert test="string-length(.)&lt;64">name attribute must be less than 64 characters</assert>
-            <report test="starts-with(.,'NX')">Do not start names with "NX" (reserved by NeXus)</report>
-            <!-- TODO: test regexp   [A-Za-z_][\w_]*  --> <!-- but cannot do in Schematron -->
-            <report test="starts-with(.,'0')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'1')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'2')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'3')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'4')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'5')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'6')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'7')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'8')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,'9')">names must start with a letter or "_"</report>
-            <report test="starts-with(.,' ')">names must NOT start with whitespace</report>
-            <report test="contains(normalize-space(.),' ')">names must not contain a space</report>
-            <report test="contains(.,'&amp;')">names must not contain a "&amp;"</report>
-            <report test="contains(.,'&gt;')">names must not contain a "&gt;"</report>
-            <report test="contains(.,'&lt;')">names must not contain a "&lt;"</report>
-            <report test="contains(.,'!')">names must not contain a "!"</report>
-            <report test="contains(.,'#')">names must not contain a "#"</report>
-            <report test="contains(.,'%')">names must not contain a "%"</report>
-            <report test="contains(.,'(')">names must not contain a "("</report>
-            <report test="contains(.,')')">names must not contain a ")"</report>
-            <report test="contains(.,'*')">names must not contain a "*"</report>
-            <report test="contains(.,'+')">names must not contain a "+"</report>
-            <report test="contains(.,',')">names must not contain a ","</report>
-            <report test="contains(.,'-')">names must not contain a "-"</report>
-            <report test="contains(.,'.')">names must not contain a "."</report>
-            <report test="contains(.,'/')">names must not contain a "/"</report>
-            <report test="contains(.,':')">names must not contain a ":"</report>
-            <report test="contains(.,';')">names must not contain a ";"</report>
-            <report test="contains(.,'?')">names must not contain a "?"</report>
-            <report test="contains(.,'@')">names must not contain a "@"</report>
-            <report test="contains(.,'[')">names must not contain a "["</report>
-            <report test="contains(.,'\')">names must not contain a "\"</report>
-            <report test="contains(.,']')">names must not contain a "]"</report>
-            <report test="contains(.,'^')">names must not contain a "^"</report>
-            <report test="contains(.,'{')">names must not contain a "{"</report>
-            <report test="contains(.,'|')">names must not contain a "|"</report>
-            <report test="contains(.,'}')">names must not contain a "}"</report>
-            <report test="contains(.,'~')">names must not contain a "~"</report>
-        </rule>
-    </pattern>
-    
-    <pattern id="NeXus_root_element">
-        <!-- Ensure the document starts with /NXroot and has /NXroot/NXentry -->
-        <rule context="/NXroot">
-            <assert test="NXentry">/NXroot must contain at least one NXentry group</assert>
-        </rule>
-    </pattern> 
-    
-    <pattern id="NXentry_NXdata_requirements">
-        <!-- Ensure the document has /NXroot/NXentry/NXdata -->
-        <rule context="NXentry">
-            <assert test="NXdata">NXentry must contain at least one NXdata group</assert>
-        </rule>
-    </pattern>
-    
-    <pattern id="NXdata_requirements">
-        <!-- Ensure the NeXus default plottable data requirements -->
-        <rule context="NXdata">
-            <assert test="count(*[@type='pArray'])=1">
-                NXdata must contain one dataset with type="pArray" (image data)
-            </assert>
-            <assert test="*/Attr[@name='signal']=1">
-                NXdata must contain a dataset with attribute "signal"
-            </assert>
-            <!-- TODO: check that _only_ one dataset in NXdata has signal="1" attribute declared 
-                Suggest to use Muenchian technique, but key attribute not supported here.
-            -->
-        </rule>
-    </pattern>
-    
-    <pattern id="Attr_element">
-        <!-- EPICS areaDetector declares user attributes with an Attr element -->
-        <rule context="Attr">
-            <report test="@type='ND_ATTR' and count(@source)=0"> 
-                must provide a "source" attribute for ND_ATTR 
-            </report>
-            <report test="@source and @type!='ND_ATTR'">
-                must use type="ND_ATTR" when specifying a source
-            </report>
-            
-            <!-- TODO: just report the first (or last) occurence -->
-            <report test="not(starts-with(name(../..),'NX')) and string(../../@type)!='UserGroup'">
-                Group <value-of select="name(../..)"/> needs a type="UserGroup" attribute
-            </report>
-            
-            <!-- TODO: just report the first (or last) occurence -->
-            <report test="starts-with(name(../..),'NX') and count(../../@name)=0">
-                NeXus group <value-of select="name(../..)"/> must have a "name" attribute
-            </report>
-        </rule>
-    </pattern> 
-    
-</schema>
diff --git a/iocBoot/timeStampMonitor.sh b/iocBoot/timeStampMonitor.sh
deleted file mode 100755
index 2345051..0000000
--- a/iocBoot/timeStampMonitor.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-caput $1:cam1:ArrayCounter_RBV.TSE $2
-caput $1:image1:ArrayCounter_RBV.TSE $2
-caput $1:image1:UniqueId_RBV.TSE $2
-caput $1:image1:ArrayData.TSE $2
-caput $1:image1:EpicsTSSec_RBV.TSE $2
-caput $1:image1:EpicsTSNsec_RBV.TSE $2
-caput $1:ROI1:ArrayCounter_RBV.TSE $2
-caput $1:ROI1:UniqueId_RBV.TSE $2
-caput $1:Stats1:ArrayCounter_RBV.TSE $2
-caput $1:Stats1:UniqueId_RBV.TSE $2
-caput $1:Stats1:MeanValue_RBV.TSE $2
-camonitor -#1 $1:cam1:ArrayCounter_RBV \
-              $1:image1:ArrayCounter_RBV \
-              $1:image1:UniqueId_RBV \
-              $1:image1:ArrayData \
-              $1:image1:EpicsTSSec_RBV \
-              $1:image1:EpicsTSNsec_RBV \
-              $1:ROI1:ArrayCounter_RBV \
-              $1:ROI1:UniqueId_RBV \
-              $1:Stats1:ArrayCounter_RBV \
-              $1:Stats1:UniqueId_RBV \
-              $1:Stats1:MeanValue_RBV \
diff --git a/iocBoot/validateXML.sh b/iocBoot/validateXML.sh
deleted file mode 100755
index be67831..0000000
--- a/iocBoot/validateXML.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-########### SVN repository information ###################
-# $Date$
-# $Author$
-# $Revision$
-# $HeadURL$
-# $Id$
-########### SVN repository information ###################
-
-# Validate the XML Attribute and Template files
-
-ATTRIBUTE_SCHEMA="--noout --schema ./attributes.xsd"
-#TEMPLATE_SCHEMA="--noout --schema ./NeXus_templates.xsd"
-TEMPLATE_SCHEMA="--noout --schematron ./template.sch"
-
-# NDArray Attribute declaration files
-xmllint ${ATTRIBUTE_SCHEMA} iocPerkinElmer/nexus_templates/PerkinElmerParams.xml
-xmllint ${ATTRIBUTE_SCHEMA} iocPilatus/pilatusAttributes.xml
-xmllint ${ATTRIBUTE_SCHEMA} iocProsilica/prosilicaAttributes.xml
-xmllint ${ATTRIBUTE_SCHEMA} iocSimDetector/ROIAttributes.xml
-xmllint ${ATTRIBUTE_SCHEMA} iocSimDetector/netCDFAttributes.xml
-xmllint ${ATTRIBUTE_SCHEMA} iocSimDetector/simDetectorAttributes.xml
-
-# NeXus file writer plugin template files
-#
-xmllint ${TEMPLATE_SCHEMA} iocPerkinElmer/nexus_templates/example.xml
-xmllint ${TEMPLATE_SCHEMA} iocSimDetector/NexusTemplate.xml