# set EPICS according to BASE or default to 3.14.12
epicsEnvSet EPICS R$(EPICS_RELEASE=$(BASE=3.14.12))

# Start Logging
date 'epicsEnvSet IOC_STARTTIME "%Y-%m-%dT%H:%M:%S"' > /tmp/$(IOC).starttime
< /tmp/$(IOC).starttime
system "rm /tmp/$(IOC).starttime"
epicsEnvSet EPICS_IOC_LOG_INET $(EPICS_IOC_LOG_INET=gfa-syslog)
epicsEnvSet EPICS_IOC_LOG_PORT $(EPICS_IOC_LOG_PORT=1514)

# iocLogPrefix will fail for EPICS 3 but that's OK
iocLogPrefix "$(IOC) "
iocLogInit
errlog "starting EPICS $(EPICS) at $(IOC_STARTTIME)"

# Set up CA search lists for different networks
# ip command is supported by IFC1210, Moxa (old and new), Deltatau, Zynq, NI, SL6, RHEL7, Debian10
# To test: Gigafrost, rPI
system "ip a s `ip r|awk '/^default /{print $5;exit}'`|awk -F'[/ ]+' -vP='epicsEnvSet IP_ADDR' '/inet /{print P,$3;exit}'>/tmp/$(IOC).net"
< /tmp/$(IOC).net
system "rm /tmp/$(IOC).net"

# Default: Automatic, we will switch it off when necessary
epicsEnvSet EPICS_CA_AUTO_ADDR_LIST YES
epicsEnvUnset EPICS_CA_ADDR_LIST

# Office (only officicial EPICS subnets, not SLS beamlines!)
ifEnvSet $(IP_ADDR) ~129.129.130.* EPICS_CA_ADDR_LIST "129.129.131.255 129.129.137.255"
ifEnvSet $(IP_ADDR) ~129.129.131.* EPICS_CA_ADDR_LIST "129.129.130.255 129.129.137.255"
ifEnvSet $(IP_ADDR) ~129.129.137.* EPICS_CA_ADDR_LIST "129.129.130.255 129.129.131.255"

# SLS machine network
ifEnvSet $(IP_ADDR) ~172.22.* EPICS_CA_ADDR_LIST "172.22.4.255 172.22.5.255 172.22.6.255 172.22.7.255 172.22.120.255 172.22.121.255"
ifEnvSet $(IP_ADDR) ~172.22.* EPICS_CA_AUTO_ADDR_LIST NO

# Metro Lab
ifEnvSet $(IP_ADDR) ~129.129.128.* EPICS_CA_ADDR_LIST "129.129.128.255"
ifEnvSet $(IP_ADDR) ~129.129.128.* EPICS_CA_AUTO_ADDR_LIST NO

# SwissFEL machine networks
# with directed broadcasts
ifEnvSet $(IP_ADDR) ~172.26.* EPICS_CA_ADDR_LIST "172.26.0.255 172.26.2.255 172.26.8.255 172.26.16.255 172.26.24.255 172.26.32.255 172.26.40.255 172.26.110.255 172.26.111.255 172.26.120.255 saresa-cagw.psi.ch:5062 saresb-cagw.psi.ch:5062 saresc-cagw.psi.ch:5062 satese-cagw.psi.ch:5062 satesf-cagw.psi.ch:5062"
ifEnvSet $(IP_ADDR) ~172.26.* EPICS_CA_AUTO_ADDR_LIST NO

# SwissFEL end stations to machine via gateway
ifEnvSet $(IP_ADDR) ~129.129.242.* EPICS_CA_ADDR_LIST sf-saresa-cagw:5062
ifEnvSet $(IP_ADDR) ~129.129.243.* EPICS_CA_ADDR_LIST sf-saresb-cagw:5062
ifEnvSet $(IP_ADDR) ~129.129.244.* EPICS_CA_ADDR_LIST sf-saresc-cagw:5062
ifEnvSet $(IP_ADDR) ~129.129.245.* EPICS_CA_ADDR_LIST sf-satesd-cagw:5062
ifEnvSet $(IP_ADDR) ~129.129.246.* EPICS_CA_ADDR_LIST sf-satese-cagw:5062
ifEnvSet $(IP_ADDR) ~129.129.247.* EPICS_CA_ADDR_LIST sf-satesf-cagw:5062

# HIPA
ifEnvSet $(IP_ADDR) ~172.19.* EPICS_CA_ADDR_LIST "172.19.10.255 172.19.30.255 172.19.32.255"
ifEnvSet $(IP_ADDR) ~172.19.* EPICS_CA_AUTO_ADDR_LIST NO

# PROSCAN
ifEnvSet $(IP_ADDR) ~172.25.* EPICS_CA_ADDR_LIST "172.25.60.255 172.25.11.255"
ifEnvSet $(IP_ADDR) ~172.25.* EPICS_CA_AUTO_ADDR_LIST NO

# WLHA
ifEnvSet $(IP_ADDR) ~172.21.11.* EPICS_CA_ADDR_LIST 172.21.11.255
ifEnvSet $(IP_ADDR) ~172.21.11.* EPICS_CA_AUTO_ADDR_LIST NO

# set some search paths
epicsEnvSet EPICS_DRIVER_PATH "bin/R$(EPICS_RELEASE)_$(EPICS_HOST_ARCH):bin:snl:$(EPICS_MODULES=/ioc/modules)"
epicsEnvSet CFG, $(PWD)/cfg
epicsEnvSet STREAM_PROTOCOL_PATH, .:$(PWD)/cfg

# Allow non-monotonic breaktables
var dbBptNotMonotonic 1

# Quiet warnings about unresolved macros in comments
var dbQuietMacroWarnings 1

# IOC monitoring
require iocStats $(iocStats_VERSION=ifexists)

# Database Upload
require iocinfo $(iocinfo_VERSION=ifexists)

# caPutLog
epicsEnvSet EPICS_CA_PUT_LOG_ADDR, "gfa-syslog:1515"
# Set EPICS_CA_PUT_LOG_PREFIX for EPICS 3 but not for 7 because there we have iocLogPrefix
epicsEnvSet EPICS_CA_PUT_LOG_PREFIX_CMD_3 "epicsEnvSet EPICS_CA_PUT_LOG_PREFIX $(IOC)"
$(EPICS_CA_PUT_LOG_PREFIX_CMD_$(EPICS_VERSION_MAJOR=3)=)
require caPutLog $(caPutLog_VERSION=ifexists)

# sw installation version number
require versionnumbers ifexists

# autoSR location
epicsEnvSet SRBASE /ioc/data